SITC of PCR Hood

PUNJAB BIOTECHNOLOGY INCUBATOR

COMMERCIAL BID FORMAT

Name of the Equipment PCR Hood

Name of the Manufacturer

Make of the Equipment

Part A - Main Equipment Qty Rate in Rs. GST Amount Total Amount

1 Instrument should be Suitable for PCR setup, Nucleic acid amplification and Contamination-sensitive molecular biology work.

2 Working Area : 3ft x 2 ft x 2 ft

3 Air Flow type: Vertical

4 Air Velocity: 0.45-0.65 m/s

5 Air Cleanliness: ISO Class 100

6 Pre Filter (10 micron, washable)

7 HEPA Filter : 0.3 micron, 99.97% efficiency, Grade H14, housed in an anodized aluminium frame.

8 Exterior: Mild steel with powder coated.

9 Interior: SS 304 with smooth workbench, easy to clean .

10 Motor: ¼ HP motor with 1400 RPM with anodized aluminium impeller.

11 Front sash: manual/motorized made of transparent Acrylic/polycarbonate.

12 Illumination: Fluorescent/LED light.

13 UV Germicidal Lamp, Automatic UV lamp off in case of sash is open.

14 Noise level: ≤ 65±5 dB.

15 Instrument should have Air/Gas cock, main switch, blower, light and UV switches, internal Electrical socket (standard).

16 Instrument should have UV hour meter, LCD touch screen controller, pressure gauze and alarm in case of pressure drop.

17 Instrument should have floor mounted with base stand and castor wheel / leveling legs.

18 Electrical requirements: 220V, 50Hz

19 Certification: CE, ISO 14644, ISO 13485, ISO 9001, UL-606614, EN 61326.

20 IQ/OQ documents to be provided.

21 User manual & test calibration certificates from NABL accredited lab.

22 Pre visit required to check feasibility of installation inside clean room.

Total Amount of Part A

PART B - AMC Charges (After expiry of Standard Warranty of One (01) Year

1st Year AMC Charges

2nd Year AMC Charges

3rd Year AMC Charges

4th Year AMC Charges

5th Year AMC Charges

6th Year AMC Charges

Total Amount of Part B

Total FOR Amount upto PBTI Site- Part A + Part B

Total Amount in Words:

1. It is mandatory to quote item wise rates for Part B lump sum rates are not acceptable for these.

2. Bidder must quote amount in the given cells, if amount against any cell is included in main component, bidder should put "Zero" value.

3. Taxes must be mentioned, if it is not mentioned, the same shall be treated as included in given rates.

4. This is to certify that the rates quoted above are not more than the rates charged from any Institution/Department/Organization

Signatory Name: