Special repair of HRT Chamera Power station-I during lean season by providing (A) High Performance Concrete, rock anchor, Epoxy Cementations mortar, drilling and grouting etc. (B) Epoxy mortar treatment.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 75mm average thickness

Providing and fixing of welded wire mesh with anchors of size 100x100x3mm thick .

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Providing and laying M50 A20 grade High Performance concrete (DRY MIX CONCRETE) as per technical specifications inclusive of proper compaction , curing including cement slurry also including cost of all materials, carriages , staging, scaffolding and labour etc. complete .

Drilling and washing of holes of dia 38mm by jack hammer or any other suitable equipment

Cement grouting 1:4 ( 1Cement :4 water ) in drilled holes with packer commplete

Providing and fixing rock anchors of 25mm dia and 3m long complete paint on bearing plate .

Supplying, preparing and applying Cementitious mortar [based on EN 1504-3 (R4)] for filling the cracks, voids & small cavities as per technical specification. (complete finished item with all leads & lifts) :- 20 mmThick

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c ) equivalent design mix

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed with wire brushes etc. and disposal of debris for all lead and lifts all complete concrete surface and reinforcement as per direction of Engineer-In-Charge

Supply of epoxy binder (rasin & hardener) confirming to ASTM C881 type-IV, Class C as per technical specification. including all stages and scaffolding carriage & labour etc. ( complete finished item )

Supply of well graded quartz sand/filler for use in epoxy mortar as per technical specification

Applying epoxy mortar over prepared concrete substrate as per technical specification i/c cost of carrage, scaffolding and labour etc. complete finished item - 6 mm thick

Applying epoxy mortar over prepared concrete substrate as per technical specification i/c cost of carrage, scaffolding and labour etc. complete finished item - 12 mm thick

VASU INFRATECH PVT. LTD.

SSA TECHNO CONSTRUCTION PRIVATE LIMITED