REPAIR TO JOINERY FALSE CEILING WALL PANELLING PLUMBING WORKS AND OTHER ALLIED WORKS IN TECH AREA AT AFS CHAKERI KANPUR

Amount

Taking down chowkats or frames with shutter not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 1 but exc 1.5 sqm and n.exe 4sqm each.

Taking down shutters of any description n.exc 1 sqm each.

All as per item No 3 but exc 1 sqm but n.exec 2 sqm each.

All as per item No 3 but exc 2 sqm each.

S&F for steel ventilator with guard bar, top hung shutter including hinges, steel peg stay, complete all as specified and shown on drawing No CE (AF)/NGP/TD-89/2007 Sheet No 1/9 to 9/9. (sheet glass shall be measured and paid seperatly

S&F for openable double shutter steel windows i.e. glazed and gauged with side hung shutters including projecting type hinges, steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded joint including PCC 1:3:6 type C-2 filling in back side of frame, complete all as per detail shown on drawing No. CE(AF)NGP/2003/TD/08 sheet no. 1/12 to 12/12. Note-(i) MS grill shall be measured and paid separately under relevant item. (ii) Wire mesh and glazing including sheet glass shall be measured and paid separately under relevant item

S&F 1.25 mm thick pressed steel frames for doors with one/more rebate incl necessary fixing lugs, hinges, lock strike plate etc complete, size 125x60mm and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.

S&F for 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides including both faces covered with decorative face veneer with lipping / frame to match complete, all as specified.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube and fixing in opening as per specification and drawing.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory Made Solid PVC Moulded Door Shutter,28 to 30 mm thick (Stiles)' with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

S&F in repair 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 150 mm long aluminium handles , cast type, anodised complete all as specified and as directed.

S&F 150 mm long aluminium handles , cast type, anodised complete all as specified and as directed.

S&F in repair mild steel butt hinges , medium weight,cold rolled, size of 100mm long complete all as specifiedand directed

S&F in repair aluminium alloy, anodised 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F aluminium alloy, anodised 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm size butt hinges of stainless steel of AISI 304 complete all as specified and directed.

Taking down easing and adjusting shutters of any description exc 1 sqm but n exc 2 sqm each refixing in same opening, all as specified and as directed.

All as per items 22.00, here-in-before, but exc 2 sqm each refixing in same opening.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from any frame etc glazed with putty or fixed with beads, all as specified and as directed.

S & F for sheet glass 3mm thick glass ground or obscured or frosted, on one side glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed.

S & F for tinted glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded agg) for hold fasts finished to match with the sorrounding surfaces including necessary form work complete all as specified and as directed.

S&F in repair mortice lock brass 4 levers vertical type, size 100mm, fixed complete all as specified and as directed.

S&F in repair 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

Sypply and fixied in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Sypply and fixied aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking down, easing and adjusting aluminum shutters including complete accessories of any description exc 1.5 sqm but not exc 4 sqm each refixing in same opening, all as specified and as directed. Note :- Replacement of door closer, glass, lock, handle, tower bolt etc shall be measured and paid separately.

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for door with chowkhat /frame made with aluminium section with size 100x44x2mm thick and shutter of vertical style with section 84x44x2mm thick and top /middle / bottom rails of shutter made with 112x44x2mm thick fixed with and including 5mm thick tinted glass panes, including necessary fixing arrangment ,joining cleats, glazing clips, rubber beading, floor door spring, tower bolts 200mm long, mortice lock 300 mm, 4 lever, rounded handles etc fixed to shutters complete all as specified and directed .

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as item No 40.00 above but except bricks Note: Old bricks obtained from item No 39.00 shall be reused after cleaning.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc.complete all as specified and as directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty complete all as specified and as directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.

Dismantling of wall and ceiling boards any type (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed.

S&F 16mm thick of size 600 x 600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular ) of Armstrong or equivalent model of other specified make including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping ,main runner and cross runner and to comprise main tee/runner 15 mm x 38mm size (load carring capacity 14 kg /sqm ) spaced at 1200 mm centres securely fixed to the structural sofit and flush fitting 1200 mm long, cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm module , cut sub cross tee/runner 600mm require independent support ,wall angle of size 19mm x 19mm secured to the periphery of the wall at 450 mm maximum centre the above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350mm , complete all as specified and directed

Supply and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistant of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% minimum to be laid in true horizental level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120gm/Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross T of size 15 x 32 mm of length 1200mm and secondary intermediate corss T of size 15 x 32 mm of length 600mm to from grid module of size 600x 600 mm suspended from ceiling using galvanised mild steel items (galvanised @ 80gm/Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifiection, drawing and as directed by Engineer-in-Chagre.

Refixing only the depressed/sagged portion of existing false ceiling grid system of any description after taking down existing ceiling board of any description and refixing the same in position. Note- The quoted unit rate include supply and fixing 4 mm dia GI bar hanger and fly clip if required in refixing.

S&F 16 mm thick of size 595 x 595mm or 600 x 600 mm mineral fibre false ceiling board of pattern classic lite RH -99 (Bevelled tegular) of armstrong or equivalent of make specified including taking down old ceiling board from existing snap grid complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise sepcifically provied for including existing roof treatment (tarfelt) including removing to a distance exc 1.50 KM but not exc 5.00 KM complete all as specified and directed

M & L cement concrete type C1 1:3:6 (20 mm graded aggregate) in copings, plinth protection courses, string courses and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Hacking out old glass (any thickness) from aluminium door shutter with rubber beading / aluminium beading and re fixing the same glass after the change of new rubber beading and tightening the same complete all as specified and directed.

Hacking out old glass (any thickness) from aluminium door shutter with rubber beading / aluminium beading and supply and fixing new glass 5 mm thick with rubbber beading and tightening in exsiting door shutter complete all as specified and directed.

S & F in repair Prelaminated particle board, 12 mm thick exterior grade, prelaminated on one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Dismantlingwrought iron or mild steel work of any description not otherwise described for complete all as specified and as directed.

M&L for framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all as specified and directed

S & F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) andhanging; also fastening and fixing complete all as specified and as directed.

S&F mild steel clamps; hold fasts and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. complete all as specified and as directed.

S&F in repair Steel rolling shutters with thickness of lathe 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as specified and directed.

M&L for servicing of existing main steel doors of hangers by cleaning/oiling/ greasing bearing wheels of top and bottom of gate including cleaning rails of shutter for smooth movement complete all as specified and directed. Note:- (a) contractor have to make its own arrangement of prop to reach the top of hanger gate for inspection and repair purpose. (b) Rate all inclusive of derailed hanger gate, realigned with using adequate manpower, chain pullay blocks and adequate supports for shutters.

M & L for preparation of new previously untreated surface of wooden wood based materials of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S&F in repairs for 15mm dia pipe float valve of PTMT with epoxy coated Aluminum rod &high density plastic ball screwed for iron pipe and fixed weight-142 gm complete all as specified and directed by Engr-in-charge.

All as per sl item No 66.00 but 20 mm weight 210 gm bore pipe complete all as specified and directed by Engr-in-charge.

All as per sl item No 66.00 but 25 mm weight 455 gm bore pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge.

S&F in repairs of 20mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge.

S&F in repairs of 25mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC Frame as per specification and drawing as directed by Engr-in-Charge

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed

Taking up or down PPR/GI tubing 15 mm bore pipe removal to store complete all as specified and directed by Engr-in-charge.

Taking up or down PPR/GI tubing 20 mm bore pipe removal to store complete all as specified and directed by Engr-in-charge.

Taking up or down PPR/GI tubing 25 mm bore pipe removal to store complete all as specified and directed by Engr-in-charge.

S&F of 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per sl item No 79.00 but 20mm dia complete all as specified and directed by Engr-in-charge.

All as per sl item No 79.00 but 25mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs of CP Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repairs of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight -110gms complete all as specified and directed by Engr-in-charge.

S&F in repair PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed by Engr-in-charge.

S&F in repair angle stop valves 15mm bore (for iron pipe) fancy type PTMT any colour high pressure screwed and fixed, (minimum weight -90gms) complete all as specified and directed by Engr-in-charge.

S&F 45cm long PVC connection with two Nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge.

shanti trading company

continentalconstructionco.

aarohi nirman company

J.B.ENTERPRISES