Renovation of Crew rest room in Erode-III Branch

Supplying and Fixing UPVC (Un-plasticized polyvinyl chloride) open windows of casement type (open) the profile the size of outer frame 60mm x 45mm, shutters 60mm x 36mm,and upvc beading 16mm x 125mm and 100% corrosion free the profile and reinforcement with G i /7mm multi chambered sections with wall thick 2mm,. the EPDMrubber (black colour) covered with over all the edges of frame and shutters will be provided with espay multi power point loads and also it operates as handles.Radiations free pin headed 4mm clear glass should be provided , should have key ,lockable action ,security protective hinges ,strong loading systems.The window should be fixed to the wall with 100% packing with screw and silicon packing all round the frames. The rate includes Cost and Conveyance of all materials to work site with all Labour and incidental charges for the completion of work in all respects and Fixing the UPVC window in position with window UPVC frames as directed by the Corporation Officers etc., complete.

Providing and fixing casement doors fabricated from un plasticdized polyvinayl chloride (UPVC)sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be desined with all corner joints mitred and fusion welded.windows should be steel reinforced with 25x24x25xmmsteel reinforcement with a thickness of 1mm to have dimensional stability.The sash should be of 60x102mm. The mullion should be of 60x74mm. The profiles should have co extruded seals.hardware: All the hardware like friction stays , handles should be screwed with self tapping screws. The handles locks should be designed so that they cannot be released from outside.Glazing The window system should be glazed with 5mm plain float glass/ 6mmbison Iam . Installation : The profiles should be cut to length and welded 45 degrees.The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms eletroplated screws into plug.

Supplying and fixing of 1.50mm thick PVC floor mat over the mosaic flooring by using fevicol SR 505 grade as per standard specifications. The charges includes cost of all materials & taxes and labour for cleaning the surface and fixing etc complete.The mat design & colour should be got approved before use on work.

Supplying and fixing in position best colour without pedastral oval shape wash hand basin of size 560x450mm with a pairr of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm pvc. Waste water pipe, 32mm dia C.P. Brass waste coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with I.S.I. mark including fixing wash hand basin in position in the granite slabwith white lead, etc., complete without any leakage complying with standard specifications.

Supplying PAINTING TWO COATS with best and approved first quality of plastic emulsion paint (weather shield)in the outer walls overONE primary coat of wall primer including cost of paint and other materials,brushes,scaffolding charges including clearing the existing surface by manual labour as directed by the departmental officers complying with standard spefication etc complete.

Charges for providing two legged scaffolding using casorina poles including longtitudional and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1 m width etc complete using coir and nails etc.. The rate includes cost of all materials and labour etc including removing the scaffolding arrangements after complection of work etc.

BRICK WORK in cement mortar 1:5 (One cement and five m sand) using second class chamber burnt bricks of size 9" x 4 3 / 8" x 2 3 /4" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including cost of materials, labour charges, rentals for machinery, fuel and all other incidental charges etc.,Complete as per clause 406 of MORTH Vth Revision Specification No. 111, 112, 406, 900

Providing and laying factory made cement concrete paver blocks of required strength, thickness, colour & size/shape, made by table vibratory method using PU (Rubber mould) mould, laid in required colour& pattern over compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibrator compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc., complete as per manufacturer's specification & direction of Corporation officers. 80mm thick C.C.paver block of m-30 grade with approved colour,design & pattern.

Cement concrete 1:2:4 (One cement, two sand and four aggregates) using 20mm gauge hard granite stone jelly for flooring including laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.