Renovation and Reconstruction of protective wall at Sivankovil Theppakulam

Dismantling Clearing away and carefully stacking materials useful for re use for any thickness of wall Brick/stone masonary in cement mortar walls under 3m high

Dismantling Clearing away and carefully stacking materials useful for re use for any thickness of wall Plain Cement Concrete

Dismantling Clearing away and carefully stacking materials useful for re use for any thickness of wall Exisiting CR stone Masonary upto 3m

Dismantling Clearing away and carefully stacking materials useful for re use for any thickness of wall Exisiting CR stone Masonary above 4m

Removal of cut stone slabs Incuding all cost of labour Conveyance Charges etc completed

Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the departmental officers. - Mixing by mechanical means

CR Masonary in cement motor 1:5 (one part of cement, five part of m-sand) mix using all grantie stories and bond stones for foundation and basment from approved quarry including watering, curing and labour charges etc., completed as per standard specifications.

CR Masonary in cement motor 1:5 (one part of cement, five part of m-sand) mix using all grantie stories and bond stones for foundation and basment from approved quarry including watering, curing and labour charges etc., completed as per standard specifications.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed for Plinth beam

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 3250Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Upto basement level

Supply and fabrication and placing in position MS or R.T.S bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors

Refixing of cut stone slab over bed block Incuding all cost of labour Conveyance Charges etc completed

Brick work in following In Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing existing grill entire length of wall Incuding all cost of labour Conveyance Charges etc completed

Providing formation and maintaining of protective bunds in coffer dams Incuding all cost of labour Conveyance Charges etc completed

White washing one coat with freshly burnt shell lime white in colour in all floors including the cost of lime and other materials burshes scaffolding charges etc., complete complying with standard specifications and as directed

Supply and fixing of MS Grill including cost of steel, labour charges for manufacturing grill and fixing in position and all other incidental charges etc complete

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.

Painting one coat with ready mixed enamel paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc., complete in all floors

Painting two coat with ready mixed enamel paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc., complete in all floors

Supply and fixing of 8m octaganel street double bracket electric pole with 10m interval including cables for wiring and ornamental lights, Timer pox, Incuding all cost of labour Conveyance Charges etc completed

'Supply and fixing of LED outdoor fitting (light emitting diode) Higher end 120 watts LED street light fitting with LED Incuding all cost of labour Conveyance Charges etc completed

Supply and fixing of Astronimical weekly programmeble timer switch Incuding all cost of labour Conveyance Charges etc completed

Service connection accessories LT, 1100V PVC Aluminium armoured under ground cable with ISI Mark Incuding all cost of labour Conveyance Charges etc completed

Design, Supply, Installation, Testing & Commissioning of High Jets Fountain consists of 12 feet diameter circular spray ring 1 no. made up of 63 mm dia stainless steel 304 grade pipes with necessary inlets & 19 nos. barrel nipples welded for nozzles fixing including necessary support legs to fix the ring on the floor, 5 H.P Openwell submersible monoblock water-cooled pumps 2 nos. (Three phase – 2880 Rpm – 440 V – 50 Hz - Suguna make) made up of high grade cast iron materials, water level independent high jets 19 nos. made up of stainless steel 316 grade, ball joints 19 nos. made up of brass with nickel plating, Multi color 18 Watts – 12 Volts RGB L.E.D lights 38 nos. made out of die cast stainless steel 304 Grade suitable to be fitted with emitter type power LEDs with all in one optical lens of 85% efficiency step tempered glass 8 mm with protection class of IP-68 I/C connection & water proof jointing etc. as sealed with heat resistant, toughened glass provided, Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves, necessary wire mesh unit made up of stainless steel with stainless steel frame for protect the pump from the dust and garbage articles and necessary electrical items like wall mounted Control Panel made out of MS sheet including door with lock and key arrangement with powder coated finish Control Panel made up of 16 SWG powder coated mild steel including BCH / L&T make panel boards for 5 H.P pumps consisting of isolated switch, phase lights, 1 Unit 8,46,000.00 start and stop push buttons, contactor, relay in a powder coated mild steel enclosures, contactor, relay, 63 amps 4 pole isolator Legrand / L&T make, 32 amps double pole Legrand / L&T make miniature circuit breaker for lights, necessary 1.5 Sq.mm 4 core Havels / Polygon / Finolex make electric cables for lights, 2.5 Sq.mm 3 core Havels / Polygon / Finolex make electric cables for lights and professional charges for fountain erection etc. complete as per standard specifications.

Please Enable Macros to View BoQ information