Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.8 L+₹15,433 (0.50%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.2 L+₹1.5 L (4.91%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹33.9 L+₹3.2 L (10.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹37.3 L+₹6.7 L (21.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹32.6 L
EMD Value
₹65,200
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel Marg, Lucknow Cantt-226002
ADDN/ALT TO BLDG NO 59 OF 11 GRRC UNDER GE WEST LUCKNOW
2022_MES_522135_3
GE/W/LKO/16 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹65,200
Yes
10 Aug 2022
28 Jun 2022
23 Jul 2022
28 Jun 2022
21 Jul 2022
5 Jul 2022
28 Jun 2022 - 30 Jun 2022
60 days
Amount
Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.
Dismantling of wall and ceiling board (fibre, pulp,insulation etc ) any thickness including cover fillets complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified and directed.
Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius as in half brick thick wall, built in CM 1:4 complete all as specified and directed.
Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..
Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.
Removing surplus excavated material soils exc 50m but n. exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for morrum/red bajri filling under floors or in pavings including spreading, levelling in layers n. exc 15cm thick, watering and well ramming complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base of floors complete all as specified and directed.
M & L for anti termite treatment and treating the bottom and sides of excavation @ 5 litres of emulsion per Sqm of surface area complete all as specifed and directed
M & L for anti termite treatment and treating the backfill in contact with foundation @ 7.5 litres of emulsion per Sqm of verticle surface (Area of the sub structure in contact with backfill to be measured) complete all as specifed and directed
M & L for anti termite treatment and treating the top surface of filled earth @ 5 litres of emulsion per Sqm of surface area complete all as specifed and directed
M & L for anti termite treatment and treating the soil under plinth protection @ 5 litres of emulsion per Sqm of surface area complete all as specifed and directed
M & L for anti termite treatment and treating the soil alongwith the external wall below concrete or masonary using 2.25 litres of emulsion per linear metre of the perimeter wall including drilling and plugging holes etc in apron complete all as specifed and directed
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
S&F in repairs Gypsum board 600x600x12mm thick (texture finish) double layered white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture and powder coated, hot dipped GI imposed grid frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 24x24x0.45mm thick powder coated GI angle plugged @ 600mm c/c along perimeter of wall. (b) 24x32x0.33mm thick powder coated GI tee as main and cross runners suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (c) Fixing of 12mm thick gypsum board tiles and finished complete with one coat of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span and similar works complete all as specified and directed.
M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in slab, chajjas and similar works complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surface complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splay between floors and beams, etc. and similar works for rough finished surfaces complete all as specified and directed
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works for rough finished surfaces complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed
M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild Steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M & L 40mm thick plain cement concrete 1:2:4 type B-0 (Using 12.5mm graded stone agreegates) Damp proof course to horizontal or vertical surfaces including necessary formwork with using water proofing compound as per manufatiurer's instructions complete all as specified and directed. (Note WPC shall be measured and paid seperately)
Material and Labour for 20mm thick bearing plaster in CM 1:4 using WPC @ 3% by weight of cement on brick work or concrete surface and finishing the surface even and fair complete all as specified and directed. (Note WPC shall be measured and paid seperately)
Material and labour for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M & L for Providing precast cement concrete 1:2:4 type B-0 (Using 12.5mm graded stone aggregates) set in cement mortar 1:4 as in louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.
Material and Labour for coloured digital glossy ceramic tiles 300 x 600 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.
M& L for Virified Ceramic tiles double charged dark shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M& L for Virified Ceramic tiles double charged dark shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M& L for Virified Ceramic tiles double charged dark shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4, complete all as specified and as directed.
M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.
M&L 18-20mm thick granite stone slab, machine cut and polished in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing on both sides including making moulding to edges complete all as specified and directed.
S&F in repairs Gypsum board 1200x1200x12mm thick (texture finish) double layered white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture and powder coated, hot dipped GI imposed grid frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 24x24x0.30mm thick powder coated GI angle plugged @ 600mm c/c along perimeter of wall. (b) 38x24x0.4mm thick powder coated GI tee as main and cross runners suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (c) Fixing of 12mm thick gypsum board tiles and finished complete with one coat of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
Supply and Fixing in repair PVC connection pipe 15mm bore, 450mm long with PTMT nuts complete all as specified and directed.
Supply and Fixing in repairs kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and Fixing in repair stainless steel kitchen plate rack made out stainless steel of not less than 1mm thick sheet of size 900mm x 600mm x 200mm of approved pattern complete all as specified and directed..
S and F PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed.
S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed. Make: Shakti Enterprises/Sak Plast Pvt Ltd/Prabhat sanitaryware Pvt Ltd.
S & F (125 to 175 mm long) Stainless steel six peg hanger chromium plated fancy type as approved by Eng-in-charge complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc. and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 1000 litres & not exceeding 2000 litres and S&F 2000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.
Material and Labour for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion exc. Half brick but n exc one brick in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
M&L plain cement concrete cast in situ 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed
Supply and Fixing mild steel Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Supply and fixing stainless steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specifed and directed
S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasterners of required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 65x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasterners of required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasterners of required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.) Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S & F 300mm long fancy type Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), liding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for area not exceeding 2.00 sqm each. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
All as per item No. 71 above but area of opening exceeding 2.00 Sqm each
S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.
S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.
S & F 50 mm dia, cupboard knobs polished, hard wood knobs fixed with nut, screws and washer of mild steel, bright finish complete all as specified and directed.
Supply and Fixing 30 mm width of flaps continuous piano hinges mild steel bright finish complete all as specified and directed.
S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F 100 long fancy type extruded brass handles, fabricated type polished for cupboards and wardrobe shutters complete all as specified and directed.
S & F 150 long fancy type extruded brass handles, fabricated type polished for door and wardrobe shutters complete all as specified and directed.
S & F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed..
S & F mild steel, bright finish, Butt hinges "medium weight" steel 75mm size all as specified and directed.
Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F in repair 18-20mm dia fancy type stainless steel curtain rod including side brackets/ junctions/ wall to wall and pair of decorative finial caps as approved complete all as specified and directed.
S&F in repair CP steel grating doom 100mm dia with or without hole as required complete all as specified and as directed.
M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers iincluding demolition of PCC in padding above ground floor and paving n. exc 15cm thick complete all as specified and directed.
Material and Labour 100x75 mm dia cast iron floor/nahani trap, with grating including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete as directed.
Supply and Fixing 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and laid in trenches or under floors complete all as specified.
Supply and Fixing for cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed.
S&F 200 mm long fancy type brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.
S & F in repairs Aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Material and Labour for complete removal of existing surface and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old prepared surfaces of walls complete all as specified and directed.
Material and Labour for providing and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new prepared surfaces of walls complete all as specified and directed.
Material and Labour for providing and applying wall care putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic plastic emulsion paint of required shade (Company Depot Tinted) over and including priming coat of interior primer over new prepared surfaces of walls complete all as specified and directed.
Material and Labour for complete removal of existing surface and providing and applying wall care putty of 1 mm thickness over old plastered surface to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic plastic emulsion paint of required shade (Company Depot Tinted) over and including priming coat of interior primer over old prepared surfaces of walls complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed
S&F Exterior tiles of superior quality 10-12mm thick of approved size design and shade and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.
M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for machine pressed chequerred cement concrete tiles of size 250x250x20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 complete all as specified and directed.
M&L 10mm thick rendering on fair faces of brick work and concrete surfaces in CM 1:3 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with integral water proofing compound as per manufacturer's instructions complete all as specified and directed. NOTE: (i) WPC shall be measured and paid seperately. (ii) Wherever screed bed is provided, PCC padding shall not be provided.
S&F in repairs CP brass long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, quarter turn, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. Make :- Jaquar (Kubix Prime) Cat part No. KUP-35037PM or equivalent model of Kajaria Bathware/ Cera sanitary ware
S&F in repairs CP brass 15mm bore stop/angle valves, cast copper alloy, chromium plated with capstan head, quarter turn, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. Make :- Jaquar (Kubix Prime) Cat part No. KUP-35053PM or equivalent model of Kajaria Bathware/ Cera sanitary ware
S&F in repairs CP brass 15mm bore sink wall mixer, cast copper alloy, chromium plated with capstan head, quarter turn, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. Make :- Jaquar (Kubix Prime) or equivalent model of Kajaria Bathware/ Cera sanitary ware
S&F in repair towel ring, superior quality, fancy type, brass chromium plated with flanges complete all as specified and directed. Make :- Jaquar Cat part No. AQN-7721 or equivalent model of Kajaria Bathware/ Cera sanitary ware
S&F PVC cabinet shutter as in Kitchen, Cup board, wardrobe etc with suitable frame including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum Area of Shutters, Shelves, partitions shall be measured for payment purpose
S & F hydraulic slider of size 8"x1"x1/2" with steel ball and aluminium body and sticking plate including letting complete all as specified and directed.
S & F Auto hinges of size 3"x2"x1" of stainless steel body complete all as specified and directed.
Supply and fixing in repairs stainless steel wardrobe trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed. Make of basket -3 Square, Make of channel-Hettich or equivalent approved.
Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.Make of basket -3 Square or equivalent approved, Make of channel-Hettich or equivalent approved.
Supply and fixing in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.Make of basket -3 Square or equivalent approved, Make of channel-Hettich or equivalent approved.
Supply and fixing in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.Make of basket -3 Square or equivalent approved, Make of channel-Hettich or equivalent approved.
Supply and fixing in repair stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and as directed.Make of basket -3 Square or equivalent approved.
Supply and fixing in repair stainless steel modular type basket of size 20x20x4 inches (pull out of 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.Make of basket -3 Square or equivalent approved , Make of channel-Hettich or equivalent approved.
Supply and fixing in repair stainless steel modular type basket of size 20x20x12 inches (pull out of 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.Make of basket -3 Square or equivalent approved, Make of channel-Hettich or equivalent approved.
S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunken box for modular switches/sockets, regulators etc and making good to the disturbed surfaces to match with the existing finishes complete all as specified and directed for one light / fan point controlled by one switch complete all as specified and as directed. Note :- Modular flush boxes, cover plate & switch sockets etc shall be measured and paid seperately
All as per item no 120 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item no 120 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item no 120 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
Supply and fixing Modular switch 1 way 6A, 1 module complete all as specified & directed.
Supply and fixing Modular switch 1 way 16A, 1 module complete all as specified & directed.
Supply and fixing modular Socket, 6A - 2/3 pin combined 2 module complete all as specified & directed.
S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified & directed.
Supply and fixing white cover plate with frame modular type of 03 module complete all as specified & directed.
Supply and fixing white cover plate with frame modular type of 06 module complete all as specified & directed.
Supply and fixing white cover plate with frame modular type of 08 module complete all as specified & directed.
Supply and fixing modular metal flush boxes of 03 module complete all as specified & directed.
Supply and fixing modular metal flush boxes of 06 module complete all as specified & directed.
Supply and fixing modular metal flush boxes of 08 module complete all as specified & directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
Supply and fixing Fan step regulator, 120W - 2 module (Modular) complete all as specified & directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed at site.
S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCCB & MCB to be measured and paid separately)
S&F MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB single door type, single pole and neutral 2 way, 240Volts without common neutral link, epoxy powder coated, factory made complete without MCB complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.
M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P
S&F super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.Make Philips cat part no.: RC380B LED30S -6500 G4 L60 W60 PSU OD OC/Havells Pluto Neo Panel cat no PLUTONEO2X2PLR34WLED857S/ Bajaj SKYLUX GZI SERIES -RECESSED cat no BZRSQL 36W GZi WH
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW
S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Havells Endura Sundown cat No ENDURASUNDOWNSL25WLED765PASYBOPCIHD
S&F in repairs of recess type square LED 12W downlighter all as per specified and directed. Make: Havells Edgepro square EDGEPROSQDLR12WLED840S/ 857S/ Phillips green LED ultima square DN096BLED6s-6500/4000 PSU WH/ Jaquar lightening NEVE PLUS cat no LNEP01S012XC/XW
S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: Integra neo surface DLS15WLED840S/ Phillips sleek surface SM250 & SM251 (Circular)/ Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH RD
S&F in repairs Flexiion 5 Mtr LED strip 22 W, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install. Make Havells LHEHCPP7IN1W022 Driver:LSSLNW0135/Philips LED Strip Sky cove LED strip/ equivalent in BAJAJ
Supply and fix wall mounting fans 400 mm (white string controlled oscillating type) including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make Orient wall 44 (white)/Crompton Fizz Air Hi speed/Usha Mist Air Icy
S& F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)
S&F ceiling fan 1400mm sweep, BEE star rated (40-48 W), Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Bajaj (Energy saving )/ Havells (Energy saving model ES neo)/Venus Home Appliances Pvt Ltd/ Anchor
Taking down carefully ceiling fan/exhaust fan of any capacity from any position by disconnecting all connection and refixing the same including all electric connection and acessories as required after overhauling, oiling, greasing etc. complete all as specified and directed.
S & F water heater storage type electric BEE five star rated of capacity 25 ltrs to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Havells (Adonia seris) / Bajaj Montage / Jaquar & Co. Pvt Ltd NOTE:- Old water heater storage shall be deposited in AGE E/M yard.
S & F in replacement of exhaust fan single phase, 230/240 Volt heavy duty metalic body of size 300 mm sweep 1400 RPM with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed by Engr-in-charge. Make:- Bajaj (heavy duty metal body)/Havell's (Turbo force HP)/ RR Kabel Ltd (Heavy duty) NOTE:- Old exhaust fan shall be deposited in AGE E/M yard
S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed Make: Havells Ruby clear with cat Part No.RUBYPT25WLED757PSYMTOPC/Bajaj ARIAN cat no BGCTN 25W LED WW/ or equivalent model in Philips & Ecolink
S & F in commissioning of garden pole size 40 mm dia ,1.00 metre long, GI pipe light grade, duly painted with two coats of synthetic enamel paint including with nuts, bolts grouting in ground with PCC block of grading 1:3:6 type C-1(using 20mm graded stone aggregates) of suitable size complete all as specified and directed.
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated Aluminum conductor served with an inner sheathing of PVC tape, over all PVC sheathed of 10 Sq mm 2 core stranded conductor nominal cross section including taking out old unserviceable cable complete all as specified and directed.
Supply and fixing in repair exhaust/fresh air fans 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make Havells Ventil Air DX or equivalent model of Bajaj/ Venus Home Appliances Pvt Ltd.
S&F in repair pressure pump, 1 HP capacity, electric driven, single phase AC 230 volt maintaining suitable pressure in water supply distribution system at bath room, by disconnecting of unserviceable pump motor incluing GI fitting like Tee, elbow, nipple, socket, reducer etc. of any size complete all as specified and directed. Make :- Grundfos cat no. B07G6K2G5Q/ Crompton Greaves cat no. CFMSMB5D1.00-V24/ Kirloskar cat No. CPBS-73624V
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
M/S S S A ASSOCIATES
M/S KAUSHIK CONSTRUCTION
M/s J C Oberoi
M/s Sachkhand Traders
Spectrum Enterprises
M/S AMARJIT SINGH
Adamya Group Of Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .