PROVISION OF STORAGE ACCN FOR B/R AND E/M STORE AT AGE (I) NAYA RAIPUR AT NAYA RAIPUR MIL STN

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil all as specifed and directed.

-ditto- all as per item No 2 above but exc1.5m and not exec 3.00m in depth all as specified and directed.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, etc and mass concrete all as specified and directed.

M&L Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts, etc and mass concrete all as specified and directed.

M&L Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.5m span etc all as specified and directed.

M &L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in Chajja all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls etc all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.(Fair finished surface).

Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Ditto, but 5 mm dia and over upto and including 10mm dia in stirrups,spacer and binders all as specified and directed.

M & L mouduler size fly ash brick work with sub class B bricks straight or curved on planexc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and fair without using extra cement but using water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick or concrete surfaces(internal walls) finished smooth and even without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

M L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface all as specified and direcetd.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even surface all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and fair with out using extra cement complete all as specified and as directed.

Forming contraction (dummy) joint 65mm deep X 10mm wide filled with sealing compoung Grade 'A', complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base complete all as specified and directed.

M&L for two coats of cement base paint incl preparation of new surface of wall over and including a coat of alkali resistant primer paint complete all as specified and as directed.

M&L for three coat of white washing on newly plastered surface complete all as specified and directed.

M&L for three coat of white washing on ceilling newly plastered surface complete all as specified and directed.

Supply only water proofing compound of approved make.

M &L Brick work with fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 all as specified and directed.

S&F 3mm thick Sheet glass , ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete.

S&F Aluminium handles, cast type anodised 100mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150 mm all as specified and directed.

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified and directed

S & F 250mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alliminium allow and fixed sliding door bolts plate type extanlled black bright bolt not less than 12mm dia with and including a minimun 06 bolts and not less than plate and two on staple plate.

M&L for Pressed steel frames for doors (125 x 60 mm) with one or more rebates includings necessary fixing lock strike , plate etc complete all as specified and directd.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides..complete all as specified and directed.

M &L for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail.ed or welded all as specified and directed.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.

M & L for two coats of synthetic enamal paint over red oxide primer on steel surfaces including preparation all as specified and directed.

S&F harisson rails,mild steel , chormium plated with fixing bracket,stops,rollers etc for hangging curtain rod complete all as specified and directed

M&L machine cut mirror polish kota stone slab flooring 20-25 mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing .complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Material & labour for brick work with sub class ‘B’ fly ash bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick thick walls complete all as specified and directed.

Material and labour for point wiring complete with and including single core PVC FRLS insulated unsheathered flexible bright concealed multi stranded copper conductor cables 1.5 Sqmm 1100 Volts grade drawn through and including heavy grade PVC rigid concealed condiuts 20mm or higher dia as reqd at the site. totally concealed in walls / floors /ceilling including all conduit accessories /fittings /junctions boxes /inspections cover etc of heavy grade , ISI marked and sunk terminal sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cupwasher, for mounting of switches , sockets , fan, regulators etc, including 1.5 Sqmm PVC insulated, unsheathed fliexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaries/fans etc, at one end and to common earth dolly at other end, all as specified, directed and shown on drawings. complete all as specified for the followings :-

One light point controlled by one switch

One Fan point controlled by one switchlight point

One socket out let 5 pin 5 Amp on same board

One socket out let 3 pin 5 Amp on independent board

All as per item No 52 above but using 4.0 Sqmm cable for one 15 A socket outlet point controlled by one switch on independent board with and including 2.5 Sq mm PVC insulated, unsheathed copper conductor cable as earth continuity conductor .

S & F modular switch 1 way 6A 1 module complete all as specified and directed.

S & F modular socket 6A 2/3 Pin combined 2 module complete all as specified and directed.

S & F for ceiling rose 3 phase/PVC/polycarbonated isolated body 65 x20 mm, 3 terminals complete all as specified and directed.

S & F for modular fan regulator 120W, 2 module complete all as specified and directed.

S & F modular socket outlet 1 way 6/16 Amps 2/3 pins combined 2 module complete complete all as specified and directed.

S & F modular switch 1 way 16A 1 module complete all as specified and directed.

S & F Modular flush box 2 module complete all as specified and directed.

S & F modular white cover plate and frame 2 module complete all as specified and directed.

S & F Modular flush box 3 module complete all as specified and directed.

S & F modular white cover plate and frame 3 module complete all as specified and directed..

S & F Modular/ metal flush box 6 module

S & F modular white cover plate and frame 6 module.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix building security light of 35/36 watt IP 65 watt,LED die casting aluminium with LED street optic lenses ,efficacy of skyline plus is upto 120lm/w, with pea nut lenses LED type with bracket arrangement all as per required and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with bruchiess direct current motor (BLDC) along with hanging arraangement,connecting with accessories like suitable length copper conductor cable, fastener bolts, fan hook, fan box all complete.

S & F for MCB DB's 8 Way SPN, 240 volts for mounting MCBs/RCBO's ELCB's etc. as per IS specification of factory made fabricated out of CRCA sheet 1.2 mm thick powder coated fitted with DIN Channel neutral link and 200 Amps rated bus bar.The DB's shall double door type . Inner door fixed on spring loaded hinges with locking arrangement & outer door openable hinged with locking arrangement having IP-43 protection.

S & F for MCB SPN 40/63 Amps 240 Volts C Curve 10 KA complete all as specified and directed.

S & F for MCB SP 6-32 Amps 240 Volts C Curve 10 KA complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground (earth pit not less than 2.25 metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected to GI earth wire 4 mm dia by means of GI bolts, nuts, check nuts and washers and earth strip protected by 25 mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on completion.Notes: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix, type B1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II and also refer Plate No-03. Earth strip and protection pipe beyond 7.5m shall be measured and paid separately. Note :- Earthing will be redone if desied erath result not found during testing of the same at site.

Supply, laying and connecting XLPE insulated armoured heavy duty electric cable 16 sqmm 2 core with aluminum conductor 1100 volts grade cross sectional area laid in ducts/wall/cable tray/trenches with suitable size of cable glands, crimping type cable lugs, connecting to existing MCCBs in panels all as specified.

Supply and spreading clean and dry fine sand free from sharp material (unwashed) laying in trenches 8 cm thick before laying and 15mm thick after laying around the cable for cushioning teting, all as specified and directed (Note : Punned thickness of sand shall be measured and paid)

Supplying and laying un-reinforced precast concrete cable cover, class LV,type 1 with peak, size 250mm x 150mm x 40mm complete , all as specified and directed by engr-in-charge.

Supply and fix light grade galvanised iron tube 40 mm bore with all fittings and fixed to walls / ceiling or laid in floor, pole or laid in trenches and road crossings including sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed with walls / poles complete all as specified and as directed.

M/S INDIA ENTERPRISES (BID ID -3440333)

M/s Rahul Traders (BID ID -3459156)

Maa Bhawani Construction (BID ID -3454088)