Construction Of Processing Unit 13.21 Sq.Mt.

CONSTRUCTION OF PROCESSING UNIT(113.21Sq.Mt)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.)

Excavation for foundation in Hard murum in cluding removing the excavated material upto adistance of 50 Meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.. ;

Filling in plinth and floors with approved excavated material/brought from outside and approved by Enginner in charge in layers of 15cm. to 20cm. Layers including watering and compacting etc. complete.

Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/granite/quartzite/gneiss metal for foundation bedding, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Numbert be allowed.) With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc)

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc, complete. With natural sand/V.S.I. quality Artificial Sand.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete(Excluding reinforcement and structural steel) with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.

Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in Cement mortar 1:6 in Foundation and plinth of inner walls/ in plinth of walle including balling out water manually striking joints on un exposed faces and watering etc complete)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/gnelse eite/gnelse metal for R.C.C. Beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processer based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade.

Providing and fixing in position HCRM/CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNumberpies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with convertional/15, type brick in cement mortar 1.6 in foundations and plinth of inner walls/ in plinth extermal walis including baliling out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventionat 15. type bricks In cement mortar 1:4 in half brick thick wall including mild steel longitudinal 1.15 reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding. racking out joints and watering etc. complete.

Providing intemal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc complete

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar1:4 using waterproofing compound at nd at 1 kg per cement bag curing the 1.17 same for Numbert less than 2 days and keeping the surface of the base coat 39.74 rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1.4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. Complete

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc, complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc.complete

Providing and applying priming coat on concrete/masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing In Rs.plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.

Providing and laying in position flooring of telephone black/Amba White/Cal bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and fixing in position. (as per 1.5.1868/1982) Aluminium sliding window of two tracks with rectangular ular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre, and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x1 30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre, and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Providing and foxing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square In Rs Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and foxing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete, (excluding primer coat)

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc complete. Spec. One Number: As directed by Engineer-in-charge.

Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt.total on each side) profiled sheets for roofing. The feed material is manufactured out of Numberminal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with iNumberrganic pigment). The paint shall have a total coating thickness of Numberminal 35 um, comprising of Numberminal 25 um exterior coat on top surface and Numberminal 10 um. (weight of profile 4.52 Kilogram/ One Square Metre)

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete. (Weight of 6.8 Kilogram/Square meter)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x5 mm angle section fitted with sliding boits and handies for both sides, deep M.S. channel section of depth M.S. channel section of depth and thickness Numbert less than 65 mm and 3.15 mm respectively with hold fast arrangements.M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,M S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet Numbert less than 0.9 suspension shaft of minimum 32 mm diameter, hood caver of M.S. sheet Numbert less than 0.9x operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) roviding and Fixing of Turbo Ventilator for Roof. et complete.

Providing and Fixing of Turbo Ventilator for Roof et complete Rate as per market Rate 2.00 9702.00 Number 19404.0

Royality

Murum,Rubble

Material Testing

Cement Fineness,consistency,Settling,Time,Compressive Strength, Specific Gravity

Concrete Cube Compressive Strength

Rebound Hammer Test

M20 Concrete Mixed Design with all test on basic materials

Concrete Cube Compressive Strength

Combined Flakiness and elongation of single metal

water absorption compressive strength and efflorensence test of bricks (Set of 5)

TMT STEEL: Yield stress,Ultimate Tensile Stress elongation weight per running meter.

Crush Sand:Fineness Modulus,Silt Content

Murum, Atterberg Test

Density of Compacted Layer

Electrification Works

Point wiring for light/bell/exhaust fan in FVC trunking (caning-capping) with1.5 sq.mm 2+18) FRLSH grade copper wire, earthingand modular type switch, required accessories as per specification

Wiring for plug on board with Switch socket murfisce/concealed type, copper wiring and earthing and with modular accessories specification

Supplying and erecting regular standard model celling fan of900/1050 min. sweep complete erected in Number FG-FN/CF

Supplying and errecting Fan hook of 10 mm. M.S. round bar grouted in RCC

Supplying & erecting ready to use Retrofit T8 LED 16 20 tube light withpolycarbonate body, heat sink, integra grated HF electronic driver complete &compatible to T8 /T12 LED luminaire by disconnecting starter & ballast ifnecenary.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B 22/E-27 base

10kA Supplying, erecting & marking SPMCB 6A to 32A, B- series with rated short-circuit breaking capacity (Icn) in provided distribution board perspecification Number SW-

Supplying, erecting & marking DPMCB40-63 A, B-series with rated short-circuit breaking capacity (lon) 10kA in provide distribution board as perspecification

Supplying and erecting single pole and neutral and distribution board (SPND8), with 2 ways for incoming & 6 ways (6 pole) for outgoing SP MCBs, with door 1.2mm thickness ness surface/flush mounted IP 43 IP 43 Protection on iron GI frame as per specification

Supplying and laying PVC trunking (PVC casing-n capping) )of size 20 mm accesorries on wall/celling as per spec

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or places as per specification

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places, as per specification

Supplying, crecting & terminating FR XLPE insulated, galvanised cable 1100 V, 4 core 10 sq erected with glands & lugs, steelformed wire armoured (strip) mm.Aluminium conductor complete on wall/trusses/pole or laid in provided trench/ pipe as per specification

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification

ESHS Plan

Please Enable Macros to View BoQ information