Modification of 12 KW oven (Heating Chamber) to 18 KW oven (Heating Chamber) with double decker Trolley at Electricity Transformer Repairing Workshop Aliganj, under EUWD-Lesa, Lucknow

Amount

Providing & fixing of heating element 06 Nos. Stainless steel tubular type I.S.I. mark fitted at back side in the heating chamber.

Providing & fixing of 50amp. Contractor of reputed make (L&T/BCH/ABB make).

Replacement of electric new circuit heat proof glass coated wire different gauge as required in heating chamber..

Complete all the work with opening, Refitting & Servicing.

Fabrication & Erection of Double Decker Trolley (Size of Trolley) i.) Length : (1800 mm) approx. ii.) Width : (1400 mm) approx. iii.) Height : ( 750 mm ) approx. Heating Chamber is provided with the double Decker trolley in to two floor lower & upper. • The Trolley will be supplied having Double Decker System with the provision of Four side M.S Pillar as the leg & frame height 750 mm . The Trolley will be out of suitable size of M.S Channel of 100 x 50 x 6 mm fix in the trolley as the top of the plate form with double support mounted of 4 mm thick sheet with welding & smooth finish for a load of 3 MT capacity. Suitable design MS Plate supported by 2 pairs of wheels with bearing on each trolley, moving on track .supports laid in the bottom floor with extension on door side for full discharge . The rail track will be made of MS Bar 04 nos. of size 50 x 50 with 18 ft. long. • The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS.

R.D. ENTERPRISES