Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹97.1 LAccepted-AOC D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹1.0 Cr+₹2.5 L (2.50%)Rejected-Finance | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹1.1 Cr+₹4.0 L (3.95%)Rejected-Finance D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹1.1 Cr+₹9.6 L (9.49%)Rejected-Finance 86 NAROTTAM KUNJ MADHU NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹1.1 Cr+₹10.8 L (10.6%)Rejected-Finance A 91 DEFENCE COLONY AGRA CANTT AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | 5 | Rejected-Finance Not being lowest |
Tender Value
₹1.3 Cr
EMD Value
₹2.1 L
Closing Date
7 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AGRA
112 TAJ ROAD AGRA CANTT
ADDN / ALTN CUM SPL REPAIRS TO BLDG NO. T-33 AND T-34 AT AGRA UNDER GE (EAST) AGRA
2022_MES_523213_1
84250/E8
Open Tender
Civil Works
Item Rate
270 days
Agra
MES contractors enlisted in Class B category a(i) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹1,000
GE EAST AGRA
₹2.1 L
Yes
30 Jun 2022
10 May 2022
13 Jun 2022
10 May 2022
7 Jun 2022
31 May 2022
10 May 2022 - 17 May 2022
60 days
Amount
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc any radius, built in CM 1:4 half brick wall complete all as specified & directed
M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.
M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered surface of wall applying two coats of oil bond distemper with 2mm thick wall care putty complete all as specified & directed.
M&L for two coats of cement base paint on newly plastered surfaces with preparatrion of surfaces with self primer complete all as specified & directed.
M&L for two coats of cement base paint on old plastered surfaces with preparation surfaces of wall complete all as specified & directed.
M&L for two coat of oil bond distemper on new plastered wall surfaces with preparation of new surfaces completre all as specified & directed.
M&L for three coats of white washing on new plastered surfaces in wall with preparation of surfaces complete all as specified & directed.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed
S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.
S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.
S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore, brass chromium plated pillar cock (foam flow) screwed down for pipe and fixed complete all as specified and directed.
S&F in repair 15 mm bore CP Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repair 15 mm bore CP Stop valves, with long shank screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.
S&F Vitreous china wash basin white flat back of size 650 x 450 mm including waste pipe chain plug brackets and rackbolt complete fixed to wall including 32mm dia bore CP coupling complete all as specified and directed. .
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed
S&F vitreous china wash down water closet pan pedestal pattern white (excluding fixng bolt flushing cistern and flush pipe,anti syphonage pipe ) complete with seat cover white connected to trap closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hingeing device complete all as specified and directed.
S & F in repairs brass chromium plated shower Rose 125mm dia with or without swivel joint any size including fixing to steel . or union complete all as specified and directed
S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated bras screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.
S&F in repairs 100 mm dia of outlet PVC floor trap, with grating incl jointing to waste pipe fixed in cement concrete (1:2:4) type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for non skid joint free coloured tiles (1st quality / premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.
M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface of size 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles over & including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .
M& L for vitrified ceramic tiles 10 mm thick(square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including15 mm thick screed bed in CM ( 1:4) including dismantling of existing tiles with screed bed complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over & including 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including 10 mm thick cement plaster in CM (1:4) screed and jointed with ditto as specified and directed.
S&F chequred cement concrete tiles 30cmx30cmx25mm thick set , jointed and pointed in neat cement slurry in floors with grey cement and no pigments over & including 20mm thick screed bed or bedding layers in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75m thick cement concrete in path / floor complete all as specified and directed.
Supply only integral water proofing compound liquid complete all as specified and directed. (Note :- WPC shall be used as per direction of EIC)
Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) complete all as specified and directed.
Taking down Chowkhats or frames exc. 1.5 sq. m but n. exe 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 50mm x 47mm made out of 5mm colour (wood grain) PVC sheetreinforced with MS square tube , supplying and fixing in opening kitchen cabinet complete all as specified and shown in drawings complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and direced.
S&F mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-410- W (Gde-E-250) quality-B including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. , kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F steel windows with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F steel windows with side hung shutters including Box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S & F Mild steel work in framed work such as grills, gratings, guard bars etc, with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290 - Gde E-165 complete all as specified & directed.
S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed
S&F Steel windows or ventilators, fixed type, with glazing bars dovetailed or welded complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
S&F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair 300 long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 100 mm long Butt hinges, medium weight cold rolled and fixed, type B-21 complete all as specified and as directed.
S&F 100 mm long Butt hinges,cast brass with mild steel hinge pin bright polished and fixed complete all as specified and as directed.
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
M&L Providing, cement concrete 1:2:4 type B1, (using 20mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.
M&L for Preparation of New or previously untreated wood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M&L for Preparation of New or previously untreated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamal paint over a coats of red oxide primer complete all as specified and directed.
M&L for Preparation of old painted wood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and direced.
M&L for Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamal paint complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling asbestos cement (corrugated semi corrugated etc ) sheets in roof covering complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof cladding to wall, ridges fixed with self tapping screws complete all as specified and directed.
S&F anodised aluminium/GI snap grid frame work for false ceiling all as specified of grid size 605 x 605 including GI hangers of suitable dia and fixed to purlin/rafters complete all as specified and directed.
S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
M&L for preparation surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of gradeW(Gde-E-250)quality-B complete all as specified and directed..
Dismantling of structural steel work inclduing doors, gates etc in any position complete all as specified and directed.
Demolition and breaking up 150 mm dai drain pipes (salt glazed ware, or reinforced concrete) set in cement mortar complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil.complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.
M&L for Rolled sections as in framing for cladding, glazing , manhole frame and the like fixed with anngle cleats and connecting plates, etc. FE 410-W(Gde -E-250) quality A complete all as specified and directed.
Forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped ends etc complete all as specified and directed..
M&L for providing precast cement concrete 1:2:4 type B-1 (using 20 mm grade stone aggregates) as in manholes covers set in CM 1:4 complete all as specified and directed.
M&L for TMT Mild steel bars 6 to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes afte they are laid and tested cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) for 150mm dia pipe.complete all as specified and directed.
S&F Salt glazed stone ware drain pipes laid in trenches and jointed in cement mortar as specifies for 150mm dia.complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified .
Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be acceptable) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removing from site.
M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, sunk in cast iron/Pressed steel terminal boxes 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Finolex/RR Kablel/Grandlay. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch
(b) One 5 pin socket outlet 5 Amps on independent board
(c) One 5 pin socket outlet 5 Amps on same board
(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent
All as per item No 86 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FR PVC insulated sheathed cable with FR PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board complete all as specified and directed
Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.
Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.
Supply and fix socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.
Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and directed.
S&F piano type bell push 5 Amp 240 Vlot complete all as specified and as directed.
Supply and fix Call Bell, AC, 230 volts, single pole, complete all as directed
S&F ceiling rose , PVC/polycarbonate,, insulated body surface Bakelite 65mm dia three terminals all as specified and directed.
Supply and fix in renewal Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and directed.
Supply and fix in renewal of LED Bulb 7 W, warm white complete all as specified and directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in LED light fitting with high out put diffuser 4 feet, 20 watt 220 V AC, LUMEN < 2000 with lumen efficacy 120 lumen/watt, basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in LED light fitting with high out put diffuser 2 feet, 9 watt 220 V AC, basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specfied and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed
S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing conduit including taking down of existing un serviceable sub main wiring complete all as specified and directed
Supply & fix in renewal of sheet metal enclosure Vertical TPN DB 4 Way As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, With provision for 250 Amp MCCB as incomer and SP/TP MCB's as outgoing complete all as specified and directed
Supply and fixing in renewal MCCB 4 pole, 160 Amps, 50 Hz, Icu=16 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity as per IEC-60947-1 and 60947-2 standard complete all as specified and directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link all as specified and directed.
Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissionin complete all as specified and directed.
Supply and fixing MCB SP 1 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core, Complete all as specified and directed.
Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out hard complete all as specified and directed.
Returning, filling in hard / dense soil, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.
Removing excavated material hard / dense soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming complete all as specified and directed.
Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and directed.
Supply and lay Tubes,'light grade' galvansized 40mm dia for cable protection with all fitting and fixed complete to walls and ceiling or laid in floors/road crossing complete all as specified and directed
Supplying and fixing smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition complete all as specified and directed.
M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire complete all as specified and directed.
M/s Allied Traders
garg construction company
M/s J S & SONS
M/s Shrangi Rishi Construction
M/s Himgiri construction
Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.
BHARAT ASSOCIATES PVT LTD
Gupta Automobiles
H.P. CONSTRUCTION CO.
Ishan Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .