PROVN OF CERTAIN SPECIAL REPAIR WORKS IN AGE BR I UNDER GE C KIRKEE

Amount

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.56mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and directed.

S&F aluminium powder coated window sliding type (4 track) with frame size 130x35x1.2mm thick or as suitable at site and shutter frame size 39.40x17.70x1.2mm thick with three glass shutter and two mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.56mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.incld taking down existing steel ventilator all as directed.

S & F 35mm thick 2nd class HW glazed or skelton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as per clause 8.20 (a) of SSR pt-1

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm all as specified.

S & F 200mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified.

S & F mild steel pressed handle, oval type, stove enameled black of size 150mm, fixed with screws or welded, complete all as specified.

S & F 100mm long stainless steel medium weight butt hinges for PVC/wooden door shutters and frames fixed with bright screwes complete.

S & F aluminium anodised sliding door bolt plate type, not less than 12 mm dia with and incld Mild steel 6 bolts and nuts, 4 on bolt plate and 2 on staple plate length of bolt 300 mm welded to door shutter/frame all as directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls or concrete surfaces etc at any position including raking out joints, hacking for key, scrubbing down with water complete all as directed.

M&L rendering 10 mm thick on concrete surfaces such as jamb, soffits for fixing window, ventilator etc in CM 1:4, finished even and smooth using with sagol including preparing new plastered surfaces and applying required finishes to match with the existing site condition complete all as specified and directed.

M&L for preparation new steel surfaces of any description exc 10 cm width or girth and applying two coats of Synthetic Enamle Paint over a coat of red oxide complete all as specified and directed.

M & L for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Dismantling at any height of single layer Mangalore pattern or similar tiles in roof coverings at any height complete.

S&F roof tiles, Mangalore Pattern, interlocking at side joints laid dry single layer or similar tiles in roof coverings complete all as directed.

Ditto as item above but except Tiles.

S&F ridge or hip tiles to suit Mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as directed.

S&F at any height second class hardwood clean swan battens at 30cm centre to centre and sectional area exceeding 13Sqcm and not exceeding 25 Sqcm including dismantling battens for tiles, shingles etc of any size including tiling fillets spaced exc 15cm complete all as directed.

S&F at any height for Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugation side lap fixed with L or J type hook with washer and including necessary fittings by using class 8 type sheets , including dismantling of plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern as in roof covering/vally gutters.

Dismantling timber in scantling 40 sq.cm and over in section in any position and any description.

S & F at any height second class hardwood clean swan in scantlings including dismantling existing scantling 40 Sqcm and over in section in any position unframed work complete all as directed.

Ditto- all as per item above but except scantlings.

Dismantling at any height timber as in fillets, rail, posts rafter, purlins etc under 40 sq.cm in section in repair complete all as directed.

M&L in repair 2nd class H/W plain fillets,rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm all as specified and directed by EIC.

Ditto item as above but except rafter, purlins, fillets etc.

M&L for preparation surfaces of wood and wood based material, new or old of any description and girth and treated with two coats of creosoteon new surface complete all as directed.

Ditto as per item above but one coat of Creosote oil on old surface.

Dismantiling of boarding any description fixed in any position and at any height complete.

S&F 2nd class HW boarding 20mm thick with butt joints planned both side fixed in any position and any height with nails complete all as directed.

Demolition at any height of stone/brick /PCC block masonry built in cement mortar complete all as specified and directed.

M & L at any height for walling of square rubble, brought upto course, hammer dressing to face stones and dressing of face beds and joints upto 40mm as specified of random rubble masonry, well bonded, bedded and solidly/hearted stones built in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces on stone, block masonry surfaces on walls in CM 1:4 finished even and smooth with and including preparation of newly plasterd surfaces of wall and applying two coats of snowcem complete all as specified and directed by Engr-in-Charge.

M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with sagol with and including preparation of newly plasterd surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots and applying two coats of oil bound distemper over 3mm thick wallcare putty (Birla White) to make the surface even complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamal paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

S & F Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubnbish of the permises.

M & L for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course complete.

M & L for screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:6), complete all as specified.

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

S & F coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified.

M&L Glazed ceramic colour tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick rendering backing coat in cement mortar 1:4 all as specified and directed.

Taking down chowkhats or frames/shutter of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm and resecuring, easing , adjusting and re-fixing in same opening after minor repairs including with all necessary fittings complete all as specified and as directed by Engr-in-charge.

S&F aluminium powder coated window with side hung shutters frame made of size 100x45x1.5mm thick and shutter and stiles made of section 40x25x1.5mm thick with or without rebates, with 4mm thick plain glass fixed with aluminium beads, including gauzed and glazed shutter necessary jointing cleats/anodised aluminium fillets/ aluminium fittings such as aluminium butt hinges 100mm long 03 Nos, aluminium anodised tower bolt 100mm 02 Nos, aluminium hook and eye 150mm 01 No in each shutters including aluminium grill of 8 to 10mm dia with aluminium C channel 12.70x1.25mm thick, size of mesh not exc 7.5cm in either direction, and 0.56mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and directed.

M&L machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab including rubbibg, polishing and rounding to edges complete all as specified and directed.

Veekay Enterprises

S.R.M.K Enterprises

vishalconstruction