REP TO PLUMBING INCLUDING INTERNAL PIPE LINES AND SANITARY FITTINGS IN OD AREA AND REP TO SECURITY WALL AND SECURITY GATES IN ARMY AREA AND WELCOME MAINT INCLUDING MISC REP WORKS IN OFFICER QUARTERS AT OD AVADI UNDER GE AVADI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles size 300x200mm, 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM 1:4, complete all as specified and directed.

Taking up or down steel water tubings and connections of 15mm bore pipe complete all as specified and directed.

Taking up or down steel water tubings and connections of 20mm bore pipe complete all as specified and directed.

Taking up or down steel water tubings and connections of 25mm bore pipe complete all as specified and directed.

S & F 15mm GI tubing medium grade with all fittings and fixtures fixed to wall ceiling or laid in floors etc all as specified and directed.

S & F 20mm GI tubing medium grade with all fittings and fixtures fixed to wall ceiling or laid in floors etc all as specified and directed.

S & F 25mm GI tubing medium grade with all fittings and fixtures fixed to wall ceiling or laid in floors etc all as specified and directed.

S&F unplasticised PVC pipes 15mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F unplasticised PVC pipes 20mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F unplasticised PVC pipes 25mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F in repairs 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified.

S&F 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified.

S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs 20mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F 20mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 90gms) all as specified.

S&F in repairs 20mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms) all as specified and directed.

S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms) all as specified and directed.

S&F in repair 15mm bore brass CP mixer for mixing hot & cold water, screwed down for iron pipe and fixed, complete all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed.

S&F 750 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F in repair Lid for rotational moulded polyethylene water storage tanks (any capcity) complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes for the tanks of capacity exc 250 litres and not exc 500 litres and writing date of cleaning in synthetic enamel paint .

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes for the tanks of capacity exc 500 litres and not exc 1000 litres and writing date of cleaning in synthetic enamel paint .

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified.

S&F 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms all as specified.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms all as specified.

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.

S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F in repairs Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia, fixed in repairs, complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen of laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) all as specified.

S&Fin repairs PVC waste pipe 32mm bore all as specified

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified.

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls including all fittings complete all as specified.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Taking down chowkats or frame exc. 1.50 sqm but nexc 4 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description but exc 1 Sqm and nexc 2 Sqm each and removing to store complete all as specified and as directed.

Taking down shutters of any description but n exc 1 Sqm each and removing to store complete all as specified and as directed.

S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed .

S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.

M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed.

M & L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed.

S&F for 35mm thick second class hard wood plain framed panelled shutters (any numbers of panels) veneered particles board medium density wood particles with commercial face veneers etc, complete all as specified and directed.

S & F 35 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F for 35mm thick ( partially panelled and partially glazed) 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass,guaze (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass,guaze etc, size of members of shutter complete all as specified.

Taking down shutters of any description exc 1 Sqm and nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

S&F for factory made solid PVC moulded door shutter with woodfree EPS, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain coloured PVC sheet on back face as per specification and drawing.

Supply and fix 30mm thick 2nd class hard wood Glazed and skeleton shutters for windows, open rebated and prepared to receive glass, gauze etc,but divided into squares, with styles and rails plain, chamfered or rounded, mitred and rebated any numbers for securing glass etc sizes of members of shutters as specified in SSR part I, section 8, clause 8.24 (b) complete all as specified and as directed.

Supply and fix 30 mm thick Flush door shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified.

S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and directed.

S&F 75mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed all as specified and directed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified.

S&F for 75mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 100mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 75mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor

S & F 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Supply and fix in repairs to stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S & F in repair anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F in repair anodised aluminium window shutters , fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified & directed. Note : Provn of AC duct to be provided for windows.

S & F in repair powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified & directed.

S&F in repair aluminium (Die cast) body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg & fixed complete all as specified & directed.

M & L for 12mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to aluminium frame work shutter.etc all as specified and as directed.

S&F for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed.

S & F in repair aluminium rebated mortice lock vertical type size 100mm four lever complete all as specified and directed.

S & F in repair 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete as as specified and directed.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard barsand similar work conforming to Fe.290. Gde-E-165 all as specified.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc. including making good breakages in taking out and removing from site, all as specified and as directed .

S&F 4mm thk Sheet glass, ordinary quality fixing to aluminium frame work wit suitable cleats exc 1.5 sq.m in each pane all as specified and as directed .

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and as directed .

S & F in repair 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed.

S&F in repair for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as directed .

S&F in repair for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as directed .

S&F in repairs 150mm size aluminum handles, cast type anodised complete all as specified & directed.

S&F in repair floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as directed.

S&F in repair aluminium anodised tubular towel rail, 20mm dia D type, 60cm long between flanges of cupboard all as directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified & directed.

M & L in repair for 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter.etc all as specified and as directed .

S&F in repairs particle boards 18/19mm thick exterior grade BWR type adhesive, fixed with screw to timber frame in shelves,drawers etc, all as specified and as directed .

S&F in repair for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.in repair all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L for brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as directed .

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc.

Material and Labour for rendering 5mm thick, in CM 1:3, on ceiling surfaces and finishing smooth without using extra cement all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces on external surfaces finished even and fair all as specified and as directed.

Material and labour for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces, finished even and smooth, without using extra cement complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of wall and applying two coats of Oil bound Distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation of newly plasterd surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old surface including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion distemper on walls all as specified and as directed.

M & L for complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer to wall surfaces including preparation of old surface of wall all as specified and as directed.

Material and labour for preparing old plastered or unplastered surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of old ceilings surfaces and applying one coat of white wash complete all as specified and as directed.

M&L preparation of old painted surfaces of wood and wooden based surfaces over 10cm width of girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted surfaces of steel and iron surfaces over 10cm width of girth and applying one coat of synthetic enamel paint all as specified.

S & F in repairs 32mm dia Waste fittings brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flanged end, bedded in red lead cement all as directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified.

S&F 25mm Ball valves (weight 455 gms) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

Toilet cabinet PVC body of size 350mm x 450mm (approximate) with shelf assembly, mirror mounted as shutter as in repairs complete all as specified and as directed. Note: Make shall be of Prayag Cat No.551 or equivalent of makes listed here-in-after.

M&L for Light shade Vitrified Ceramic tile 10mm thick (Square/ rectangular) polished, area of each tile n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in whit or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as specified and as directed.

All as per item No 156 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl backing coat of in CM 1:3 10mm thick complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer all as specified.

M&L Non skid ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer for floor finishes all as specified.

All as per item No 159 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl backing coat of in CM 1:3 10mm thick.

M & L granite of any (type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing and 20mm thick rendering in cm 1:6 on brick work or concrete surface incl demolition complete all as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S & F PVC (SWR) branch piece, single (Y) equal or unequal 75mm bore with access door all as specified.

S & F PVC (SWR) ‘P’ trap of 110/110mm all as specified.

S & F PVC (SWR) ‘S’ trap of 110/110mm all as specified.

S & F PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia all as specified.

S & F 110mm PVC (SWR) reducer all as specified.

S & F 110mm PVC (SWR) vent cowl all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifed and directed.

M & L formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work vertical or to batter for flat surfaces complete all as specified and as directed .

M & L formwork to side of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similat workl; vertical or to batter, fair finished surfaces of concrete square, rectangular and similar work vertical or to batter for flat surfaces complete all as specified and as directed.

M & L formwork to side and soffits of floor or roof beams, beam haunching, griders, bressummers, lintels, cantelivers, shelves including supports, overhangs etc., also splays between floors and beams, fair finished surfaces of concrete square, rectangular and similar work vertical or to batter for flat surfaces complete all as specified and as directed.

M&L for reinforced cement concrete type A1 1:1.5:3 using 20mm graded aggregat for columns, pillars, piers, posts and struts complete all specified and directed.

M&L for reinforced cement concrete type A1 1:1.5:3 using 20mm graded aggregate(Nominal mix design) for foundation, including rafts, footings, foundation beams; plinth beams; bases for columns etc., basements slabs, under-reamed piles and mass concrete complete all specified and directed.

M&L for reinforced cement concrete type A1 1:1.5:3 using 20mm graded aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified.

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for Plain cement concrete 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, copings,pintle hinges, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.

M&L for glass copping top of compound wall in CM 1:3 complete all as specified and directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in natural ground, including taking out embedded portion and making good disturbed ground all as specified

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate in fdn, filling, mass concrete, PCC Block for Steel Post etc complete all as specified.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 20 mm graded stone aggregate in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and bot exc 250 sq cm, with orwithout chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

Restraining & resecuring including making good staples etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed.

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 410 -W(Gde-E- 250)-quality A.

Complete removal of existing treatment and treating with two coats of cement base paint to wall surfaces over a coat of primer and including preparation of old surface.

PSK Enterprises

muthu constructions

D Subramani and Sons