Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.8 L+₹5.6 L (16.8%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹39.7 L+₹6.5 L (19.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹40.5 L+₹7.3 L (21.9%)Rejected-Finance 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹41.1 L+₹7.9 L (23.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹34.7 L
EMD Value
₹66,930
Closing Date
7 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR
SPECIAL REPAIR TO BLDG NO P1 AT GRD COMPLEX KUNARAGHAT UNDER GE AF GORAKHPUR
2023_MES_613247_1
9078/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) GORAKHPUR
Class D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE(AF) GORAKHPUR
₹66,930
Yes
19 Oct 2023
11 Aug 2023
9 Sept 2023
11 Aug 2023
7 Sept 2023
24 Aug 2023
11 Aug 2023 - 18 Aug 2023
Amount
Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters. complete all as specified as directed.
M&L Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.
M&L for 15 mm thick cement plaster on wall ,facia,projection etc up to three storey building, in cement mortor 1:4 mixed with WPC @ 150 ml per bag of cement or as per manufacturer instruction finished the surface even and smooth without using extra cement, complete all as specified and directed. ( Note: WPC will be measured and paid separately)
M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement
Supply only liquid water proofing compound complete all as specified and directed.
Preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of white cement primer complete all as specified as directed.
M&L for preparation of newly plastered of surface of wall/concrete surfaces and applying three coat of white wash on ceiling surface complete.
M&L Preparation of old plaster surfaces of wall and applying two coats of distemper oil emultion complete all as specified as directed.
M&L for old preparation of surface and applying two coat of white wash on old ceiling surface complete.
Complete removing of existing treatment on wall /roof projection including facia, cornices etc by scraping with mechanical vaccum mechanism) with sanding pad ofappropriate grit to make surfaceclean,freefrom dust,loose paintetc by skilled labour comlite all as specified and directed.
M&L for providing and applyng minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for further painting.
M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified as directed.
M&L for Preparation of old plaster surfaces of wall applying two coats of cement base paint over a coat white cement primer complete all as specified as directed.
Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for.
M&L 75mm thick PCC type B-1, (1:2:4) using 40 mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement.
Taking up or down steel tubing and connections 15mm bore complete all as specified as directed.
S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.
Taking up or down steel tubing and connections 20mm bore complete all as specified as directed.
S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.
S&F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I
S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed
S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.
S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps ,including waste cupling,waste pipe , complete all as specified and directed.
S&F in repairs for 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder
S & F in repair Vitreous china urinal partition white of size 310x700 mm.
S&F in repair brass chromium plated concealed valve of 15 mm bore complete all as specified and directed.
S&F in repair brass chromium plated angle stop cock, of 15 mm bore complete all as specified and directed.
S&Fin repair CP bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia.complete.
S&F in repairs CP Grating doom 125 mm dia with waste hole complete all as specified as directed.
S&F in repairs Towel Rail 450mm long of PTMT fixed with and including Chromium plated brassscrews and wooden/plastic cleats (Minimum weight 170gms)
S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grms including arm 15 mm size 195mm long with bend min wt 40 gms complete all as specified.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.
S& F in repair Soap dish, any type, fixed toplugs with chromium plated. brass screws.
S&F in repairs PVC (SWR) gully trap/P Trap/S traps 125/110 mm,setting and jointing with solventcement
S&F in repairs 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F 75mm PVC (SWR) bends anyradius
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F 110mm PVC (SWR) bends any radius
S & F in Repair 110 mm PVC (SWR) vent cowl
S & F in repair 110mm PVC (SWR) branch piece, double (double Y) equal or unequal
S & F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth;and getting out any type of soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm
Removing surplus excavate soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge
Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete all as specified and directed.
Demolition and breaking up 150mm dia salt glazed stone ware drain pipes jointed in cement mortar and taking out of trenches removing the debries from site complete all as specified and as directed by Engineer-in-Charge.
S&F Reinforced conctrete 150mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed.
M&Lfor PCC (1:4:8) type D2 ( using 40mm graded stone aggregate ) as in the drain pipe incl packing under & haunching against the side of pipe after they are laid and tested for 150mm dia compelete all as specified.
M&L Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4
Demolition of brickwork and portions ordered to be dismantled built in cement mortar or cement lime mortar complete all as specified as directed.
M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified as directed.
Material and labour in repair for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation:- (a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately). (b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformily complete all as specified & directed. (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer. (d) Over hot bitumen laying polymeric water proofing membrance conisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed. (e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm.
M&L 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe.
Material and labour PCC in foundation filling and mass concrete type E-2, 1:5:10, using 40mm graded aggregate all as specified and directed by Engineer In Charge
M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 12.50 mm graded stone aggregate) as in sub bases of floors finished even and fair.
Demolition of brick tiles flat or edges pointed in any type of mortar complete all as specified and directed.
Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all asspecified and directed.
M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed.
M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately)
M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.
M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed.
M&L 40mm thick brick tiles laid in cement mortar (1:6) , 15mm thick mortar and joints grouted flush in cement mortar 1:3.
Refixing of 40mm thick brick tiles laid in cement mortar (1:6) , 15mm thick mortar and joints grouted flush in cement mortar 1:3.
S&F 20Cmx20cm x20mm Concrete tile with 20 mm Screed 1:4 bed mix with 5% of liquid WPC included WPC qty measure Seperated,complete all as specified and directed.
Demolition of concrete of any description and in any position not other wise specifically provided for cement concrete reinforced including roof padding, Rcc Tank etc complete all as specified and directed.
M&L for RCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work in bld upto 6M height incl use and waste of necessary formwork and scaffolding required
Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .
S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.
S&F Glazed ceramic coloured tiles 300x450x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick rcement plaster in cm 1:4 complete all as specified as directed..
S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.
Ditto but as in skirting over 10 mm thick cement morter in 1:4
Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site.
Ditto but exe 1.5sqm and n.exe 4 sqm
Taking down shutters of any description exc 1 Sqm But n.exc2 Sqm
S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.
M&L for PCC 1:3:6 type C1 as in hold fast blocks and filling in pressed steel frame incl. Necessary form work
M&L Flush shutters, 30mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified as directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg.
S&F 75 mm size butt hinges medium weight cold rolled milled steel all as specified.
S&F 100mm size butt hinges medium weight cold rolled milled steel all as specified.
S&F 200mm long aluminium anodised barrel tower bolt of extruded section conplete.
Ditto, but 150mm long .
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
M&L for 125mm size Aluminium handle cast type anodiesd complete all as specified as directed.
Detto but 150mm size
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl taking down complete all as specified and directed.
All as per item as above but without glazing bars with provision of flat iron fillets for seuring and lighing wire mess dovetailed or welded complete all as specified as directed.
S&F in repair steel ventilator with top hung shutter including hinges, steel peg stay complete incl taking down existing complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples.complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glzing with oil putty in square n.exc 0.5 sqm in each pane.
Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.
S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.
M&L for MS angle iron post flat, square/pipe tube, round bar such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, post gate, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting screws, etc and similar work complete all as specified
S&F in repair 20 mm dia stainless steel curtain rod (Dropery rod) including end Knobs fancy type as per sample.complete all as specified as directed.
S&F in repairs fancy type brackets for fixing of 20mm dia dropery rod complete all as specified and directed.
M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.
M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as directed
M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L Preparing surfaces of external walls, projection and painting two coat of APEX ULTIMA Exterior grade exterior paint over one coat of white cement primer of red colour (make: Asian paints) as directed by the GE.
S & F in repair anodised aluminium doors with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm f incl necessary aluminium fitting, like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiumalloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 5 mm thick ACP sheet in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture for each shutter,complete all as specified and directed.
Removal of demolished materials to Out side of MOD.
Taking down copper/alluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets pendants, ceiling rose, round block, regulators, light fittings etc. removing material to store for keeping in safe scustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floor or ceiling etc., complete all as specified and directed.
M&L for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed for following :- (A) One Light, fan, bell point controlled by one switch.
(b) One 3 pin switch socket outlet point 5 Amps on independent board.
(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
(d) One light point controlled by two Nos two way switch.
All as per Item here in before but with copper conductor cable for one 3 pin socket outlet, 15 Amp independent with cable 2.5 Sqmm size.
M & L modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.
M & L for modular switch, 6 Amp, one module, two way, complete all as specified and directed.
M & L for modular socket outlet 2/3 pin combined 2 module, 6 Amp, 230 Volts AC circuit, complete all as specified and directed.
M & L for modular switch 1 way, 16 Amps, 1 module, flush button single pole, one way, complete all as specified and directed.
M & L for modular switch piano flush type 1 way, 16 Amps, flush button single pole, one way, complete all as specified and directed.
S & F ceiling rose surface backlight 65x50mm 3 terminals, complete all as specified and directed.
S & F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.
S & F modular fan step regulator, 120W, 2 module, complete all as specified and directed.
S & F modular bell push 5 Amps 230 Volts, AC circuit, complete all as specified and directed.
S & F for call bell ding dong 230 Volts, AC circuit, complete all as specified and directed.
Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.
Supply & Fix 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells /Bajaj / CG/Philips.
Supply and fixing of wall/surface mounting LED luminaires 2 Fit 10 Watt (Mirror Light) white powder coated CRCA sheet steel housing with opal acrylic diffuser and decorative end plated with and including 1x10 W LED lamp complete all as directed. Make : Havells or equivalent in CG/Philips/ Wipro.
Supply and fixing LED suspended archtectural LED luminiries provides soft light and glare free symmetrical illumination (with continuous mounting end cap 20 watt fixture size: (LxWxH) in (1200x106x61) mm 240 Volt AC, including connecting up with three core flexible copper conductor cable of suitable size, complete all as directed.
Supply and fixing replacement of GI pipe bends to shape 0.75 mtr. (32/40mm dia as requires at site) with two nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall, complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed
Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surface, complete all as specified and directed.
S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.
S&F factory made epoxy powder coated distribution board TPN 4ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.
Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed.
S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.
S&F MCB, SP, 40 Amps to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.
S&F MCCB, 4 pole, 100 Amps, 16 KA, 4 pole current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.
S & F modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity, complete all as specified and directed.
Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed
M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4 sqmm conductor cable, 1 No 4 sqmm conductor earth continuity cable and accessories shall be measured as one unit length) Note: (i) Two runs of 4.0 Sqmm conductor cable and one run of 4.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length.(ii) Cutting chases and making good of disturbed surface shall deem to be including in the unit rate quoted by tenderer.
M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6 sqmm conductor cable, 1 No 6 sqmm conductor earth continuity cable and accessories shall be measured as one unit length) (i) Two runs of 4.0 Sqmm conductor cable and one run of 4.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length.(ii) Cutting chases and making good of disturbed surface shall deem to be including in the unit rate quoted by tenderer.
Cutting holes in brick wall (exc. half brick and n. exc. one brick )in cement mortar or cement lime mortar and stone wall built in lime mortar for holdfasts or inserting rungs for staging or roofs complete all as specified.
Supply and fixing in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with brushless direct current motor (BLDC) ceiling fan of 230 V,1200 mm sweep 30 cm long down rod 2 Nos canopies, shackles kit, safety rope, copper winding, power factor not less than 0.9 service value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350RPM ( tolerance as per IS: 374-2019) THD less than 10% electronic regulator unit for speed control and all remaining accessories including safty pin, nut bolts, washers, temperature rise=75 degree C (max) insulation resistance more than 2 mega ohm, suitable for 230 Volt, 50HZ, single phase, AC supply, earthing etc. including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No., complete all as specified and directed.(Note: old retrieved fan shall be deposited in EM store yard)
S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, steel body ISI mark with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.Make: Havells/Bajaj/CG.
Supply and fixing water heater storage vertical type, puff insulation type of 25 ltrs capacity and 1500 watts, BEE star rated-5, with glass line inner saell with hot & cold pipe, water connection pipe electric connection and necessary fixing arrangement and including writing MES No, complete all as specified and directed.
M&L in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 15mm bore complete.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete
M&L earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of earth plate not less than 1.5 metres below normal ground level, connected to galvanised earth wire4mm dia. by means of bolts, nuts, check nuts and washers of galvanised steel all as shown in electrical plate No.5 connected to earthing test point all as specified including testing on completion including necessary excavation and eath work in soft/loose soil, PCC 1:2:4 type B1 pit, Precast RCC cover 65 mm thick in mix 1:2:4 type B1 duly reinforced with mild steel bars 6 mm dia. @ 100 C/C both ways ,funnel made out of 0.63 mm Galvanised sheet, 20 mm bore medium grade watering pipe, GI wire mesh as directed, copper lugs, 7.50 M long Galvanised mild steel protection pipe 15 mm bore light grade, test point terminal block 75x75x25 mm,made of phosphorus bronze ,drilled and screwed including 3 Nos 8 mm dia. 25 mm long hex. head scres,Earthing lead of 7.50 m long complete all as specified.
Taking down ceiling fan by unscrewing nut, bolts, disconnection of electric cable from ceiling rose, ceiling cable ends, removing blades of any sweep and make and deposite to MES store, complete all as specified and directed.
S&F in replacement of down rod with anti sucide safe fan down rod of 260mm length suitable for fixing in existing eceiling fan complete with nuts bolts, check nut and washer including making holes by driling for bolts, complete all as specified and directed. Make: Gold Life. Note:- (i) Anti sucide safe down rod will be active if load on fan exceeding 20.00 Kg. then down rod pipe opens from middle and spring in pipe will expended for landing smoothly of person trying to commit sucide.
RVRconstructon
JYOT BUILDERS
M/S Akhilesh Enterprises
M/S DEEKSHA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .