e-NIT No.05 / (EnM)M-VIII/ 2025-26, Item No.04

Dismantling of existing L T Panel and electrical system after disconnecting incoming and outgoing connections, removing the existing material using labour tools and tackles etc. as per site requirement.

Dismantling of existing motor Starters after disconnecting incoming and outgoing cable connections, removing the existing material using labour tools and tackles etc. as per site requirement.

Charges for shipping the panel up to the site including labour, lifting charges, loading and unloading charges and other charges for shifting the panel up to the place it has to be installed.

Fixing of the new L T Panel with base frame at the site with the help of fasteners / welding and grouting of nut bolts and including all other work as per site requirements.

Making the incoming connections to both incomers the Panel by making required Cable connections between the main supply and the panel after laying and proper thimbling etc. of cable including providing & fixing of consumables as per requirement.

Fabrication and supply of base frame made out of angle iron of suitable size for fixing the above starters and suitable for making outgoing /incoming cable entries in the starter panels. It should be duly painted and ready with provisions for installing at the site.

Fixing / Installation of the above Starters along with their base frames at site with carrying out all the required works with providing material / consumables as per site requirements.

Supply of L T AluminiumArmoured Cable of size 70 sq mm X 3 Core make of cable:- Havells / Polycab / DJB Approved

Supply of L T AluminiumArmoured Cable of size 50 sq mm X 3 Core make of cable:- Havells / Polycab / DJB Approved

Laying of above cable for making supply connections between starters, L T Panel and the motors etc as per site requirement.

Making the outgoing connections of the 150/160 A MCCBs by Connecting MCCBs in panel to the incoming side of starters Through new cables as per site requirement, with proper thimbling and tapping etc. including providing & fixing of material as per requirement.

Making the outgoing connections of the 125 A MCCBs by Connecting MCCBs in panel to the incoming side of starters Through new cables as per site requirement, with proper thimbling and tapping etc. including providing & fixing of material as per requirement.

Making the outgoing connections of Starters by Connecting starters to the Motors Through the existing cables or by extending them if required and repositioning them as per the location of the newly fixed starters as above as per site requirement after proper thimbling and tapping and making required joints etc. including providing & fixing of material as per requirement.

Making outgoing connections as required for lighting loads by connecting MCB from the panel including required wiring connections etc .

Fabrication and supply of base frame made out of angle iron of suitable size for fixing the above starters and suitable for making outgoing /incoming cable entries in the starter panels. It should be duly painted and ready with provisions for installing at the site.

Fixing / Installation of the above Starters along with their base frames at site with carrying out all the required works with providing material / consumables as per site requirements.

Making the incoming connections to Starter by Connecting MCCB in panel to the starter through the existing cables or by extending them if required as per site requirement after proper thimbling and tapping and making required joints etc. including providing & fixing of material as per requirement.

Supply of L T AluminiumArmoured Cable of size 35 sq mm X 3 Core make of cable: - Havells / Polycab / DJB Approved

Laying of above cable for making supply connections between starter and the submersible pump as per site requirement.

Providing and fixing of the bus bar chamber of suitable rating as per the submersible pump for making cable connections along with base frame and proper cover for giving outdoor protection to the bus bar chamber as per site requirement.

Making the outgoing connections of Starter by Connecting new cable to the starter side and at bus bar chamber for connecting it with existing submersible cable as per site requirement after proper thimbling and tapping and making required joints etc. including providing & fixing of material as per requirement.

Testing and Commissioning of the Panel Board first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Testing and commissioning the starters first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Testing and commissioning the starter for Submersible Pump, supply form bus bar chamber first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Premier Engineering Company (BID ID -1593416)