Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC BAGGU NALLAH CHAMPA NEAR CHINAR MARKET BATOTE DISTT RAMBAN 182204 J K | BATOTE | RAMBAN | JAMMU AND KASHMIR | 182204 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.3 L+₹5.4 L (16.2%)Rejected-Finance NEAR R K HOTEL DISTRICT POONCH J K PIN 185101 | POONCH | POONCH | JAMMU AND KASHMIR | 185101 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹47.3 L+₹14.3 L (43.3%)Rejected-Finance MOHALLA KAMA KHAN WARD NO 07 HOUSE NO 88 DISTT POONCH J K | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹48.9 L+₹15.9 L (48.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹49.0 L+₹16.0 L (48.6%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S Farooq Ahmed Bhat L10 | M/S RAJINDER KUMAR L2 | M/S BADRI NATH GUPTA L4 | M/S KABIR CHOUDHARY L9 | M/S MANHAS ENTERPRISES L8 | M/S IMRAN MAJID L1 | MEELU ENTERPRISES L6 | SUNIL KUMAR SANGEET KUMAR AND SONS L5 | VIKAS ENTERPRISES L7 | JAMWAL CONSTRUCTION CO L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | B/R PORTION:
Demolition of cement concrete in ground floors and paving (unreinforced) n exc. 15 cm thick, (below or above ground level), complete all as specified and directed. | 156.75 | Cum | 200 ₹31,351 | 200 ₹31,351 | 250 ₹39,188.75 | 300 ₹47,026.5 | 100 ₹15,675.5 | 10 ₹1,567.55 Lowest | 200 ₹31,351 | 200 ₹31,351 | 100 ₹15,675.5 | 200 ₹31,351 |
| 2.00 | Demolition of cement concrete in ground floors and paving (unreinforced) exc. 15 cm thick, (below or above ground level), complete all as specified and directed. | 25.5 | Cum | 2,500 ₹63,750 | 200 ₹5,100 | 250 ₹6,375 | 200 ₹5,100 | 100 ₹2,550 | 10 ₹255 Lowest | 100 ₹2,550 | 200 ₹5,100 | 100 ₹2,550 | 100 ₹2,550 |
| 3.00 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base to floor complete all as specified and directed. | 340 | Sqm | 300 ₹1,02,000 | 250 ₹85,000 Lowest | 350 ₹1,19,000 | 600 ₹2,04,000 | 2,500 ₹8,50,000 | 300 ₹1,02,000 | 350 ₹1,19,000 | 500 ₹1,70,000 | 500 ₹1,70,000 | 350 ₹1,19,000 |
| 4.00 | M&L 100mm thick Cement with brooming finish concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring, including necessary formwork, finishing cement concrete surface even and smooth without using extra cement and PCC shall be laid in alternate panels complete all as specified and directed by Engineer-in-Charge. | 1,770 | Sqm | 300 ₹5,31,000 | 200 ₹3,54,000 | 800 ₹14,16,000 | 100 ₹1,77,000 Lowest | 1,000 ₹17,70,000 | 600 ₹10,62,000 | 920 ₹16,28,400 | 700 ₹12,39,000 | 700 ₹12,39,000 | 920 ₹16,28,400 |
| 5.00 | M&L 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, including forming and filling of joints with bituminous filler finished even and smooth without using extra cement complete all as specified and directed. | 105 | Sqm | 2,500 ₹2,62,500 | 300 ₹31,500 Lowest | 350 ₹36,750 | 1,000 ₹1,05,000 | 800 ₹84,000 | 300 ₹31,500 Lowest | 300 ₹31,500 Lowest | 590 ₹61,950 | 600 ₹63,000 | 300 ₹31,500 Lowest |
| 6.00 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. | 1,220 | Sqm | 200 ₹2,44,000 | 50 ₹61,000 | 60 ₹73,200 | 300 ₹3,66,000 | 20 ₹24,400 | 10 ₹12,200 Lowest | 10 ₹12,200 Lowest | 10 ₹12,200 Lowest | 10 ₹12,200 Lowest | 10 ₹12,200 Lowest |
| 7.00 | M&L for rendering 15 mm thick on other than fair of brick work or concrete surface on wall in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed. | 705 | Sqm | 300 ₹2,11,500 | 300 ₹2,11,500 | 320 ₹2,25,600 | 500 ₹3,52,500 | 100 ₹70,500 Lowest | 250 ₹1,76,250 | 300 ₹2,11,500 | 290 ₹2,04,450 | 300 ₹2,11,500 | 300 ₹2,11,500 |
| 8.00 | M&L for rendering 15 mm thick on brick work or concrete concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed. | 405 | Sqm | 300 ₹1,21,500 | 250 ₹1,01,250 | 320 ₹1,29,600 | 400 ₹1,62,000 | 100 ₹40,500 Lowest | 250 ₹1,01,250 | 300 ₹1,21,500 | 300 ₹1,21,500 | 300 ₹1,21,500 | 300 ₹1,21,500 |
| 9.00 | Rendering 5 mm thick on concrete concrete surface in CM 1:3, as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. | 257 | Sqm | 300 ₹77,100 | 300 ₹77,100 | 320 ₹82,240 | 400 ₹1,02,800 | 100 ₹25,700 Lowest | 200 ₹51,400 | 300 ₹77,100 | 300 ₹77,100 | 300 ₹77,100 | 300 ₹77,100 |
| 10.00 | M&L for Chicken wire mesh 25mm size of galvanised steel wire 1.23mm dia fixed with tinned tacks or wire staples, nails or screws as in flat complete all as specified and directed. | 140 | Sqm | 500 ₹70,000 | 50 ₹7,000 Lowest | 200 ₹28,000 | 500 ₹70,000 | 100 ₹14,000 | 700 ₹98,000 | 200 ₹28,000 | 300 ₹42,000 | 400 ₹56,000 | 200 ₹28,000 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
14 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS
GE 881 EWS, C/O 56 APO
SPL REPAIRS TO BLDG NO P-19 AND BLDG NO P-20 AT AP 255 IN THE AOR OF AGE B/R-II UNDER GE 881 EWS
2025_MES_721743_1
GE/PNH-59/2025-26
Open Tender
Civil Works
Item Rate
120 days
GE 881 EWS
AS PER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE 881 EWS
₹95,000
Yes
5 Sept 2025
21 Jul 2025
18 Aug 2025
21 Jul 2025
14 Aug 2025
8 Aug 2025
Amount
B/R PORTION: Demolition of cement concrete in ground floors and paving (unreinforced) n exc. 15 cm thick, (below or above ground level), complete all as specified and directed.
Demolition of cement concrete in ground floors and paving (unreinforced) exc. 15 cm thick, (below or above ground level), complete all as specified and directed.
M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base to floor complete all as specified and directed.
M&L 100mm thick Cement with brooming finish concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring, including necessary formwork, finishing cement concrete surface even and smooth without using extra cement and PCC shall be laid in alternate panels complete all as specified and directed by Engineer-in-Charge.
M&L 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, including forming and filling of joints with bituminous filler finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair of brick work or concrete surface on wall in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.
Rendering 5 mm thick on concrete concrete surface in CM 1:3, as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for Chicken wire mesh 25mm size of galvanised steel wire 1.23mm dia fixed with tinned tacks or wire staples, nails or screws as in flat complete all as specified and directed.
Complete removal of existing treatment of old plaster surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. camouflage pattern on walls complete all as specified and as directed.
Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. camouflage pattern on walls complete all as specified and as directed.
Preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Preparing new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
Preparing old plastered or unplastered surfaces of wall and applying Two coat of white wash complete all as specified and directed.
Preparing New plastered or unplastered surfaces of Walls and applying three coat of white wash all as specified and directed .
Taking down existing tarfelt including tiles and Demolition of lime concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. (NOTE : Polymeric membrane & Water proofing compound shall be measured and paid separately under relevant item of this Schedule 'A', ).
M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface. After drying of primer, apply a coat of hot blown VG 20 paving grade ((60-80 penetration) bitumen conforming to IS-702@ 1.2 Kg/Sqm of plastered surface. (b) Provide Polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, end overlaps shall not be less than 100mm and side lap shall not be less than 75mm. APP (Atactic Polypropylene) modified polymeric membrane shall be 3 mm thick weight not less than 3.6 Kg/Sqm with 200 Grams/Sqm non wovenpolyster made at centre core. The contractor shall produce purchase vouchers and test certificate from the manufacturer for polymeric water proofing membrane. (c) Over the Polymeric Water proofing membrane apply semi hot blown VG 20 paving grade ((60-80 penetration)bitumen conforming to IS-702 @ 1.2 Kg/Sqm of roof surface and blinded with fine sand in dry condition @0.5 Kg/Sqm dusted over the bitumen coat. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "Dr Fixit" manufacturered by M/S Pidilite Industries or "MOPLY FP 3MM" manufactured by M/S Texsa India Limited and 'Hyperplus" by IWL India Limited, M/S STP Ltd, Sika India Pvt Ltd, M/S Asian Paint Ltd.
Supply only Integral waterproofing compound.
Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed.
M & L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Dismantling taking down the existing framed steel gate of any size and repairing with welding, wherever required fixing new hold fast as per weight of steel gate or any other parts etc complete including fatening & re-fixing in the same opening complete all as specified and directed by Engineer-in-Charge. Note:- Hold fasts and any other minor part required at site shall be deemed to be included in quoted rate.
Preparation of new steel surfaces of any description not otherwise specified over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified & directed.
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’complete all as specified and directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.
Plain cement concrete 1:2:4, type B1 (using 20mm graded stoneagg) as in benching or throughting complete all as specified and directed.
S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplescomplete all as specified and directed.
E&M PORTION:- Taking down carefully unserviceable copper/aluminium point wiring including all fittings and making good to disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.
M&L for point wiring complete with 1100 V grade 1.5 sqmm single core PVC insulated cable (FR) of multistranded copper conductor cable drawn through and including in stove enamelled steel conduit concealed in wall with all connected accessories with provision of 1.5 sqmm insulated multistranded copper conductor (FR) as earth continuity wire and connecting to common earth dolly fixed to wall/ceiling /floor/roof including sunk pressed steel terminal boxs with 3mm thick plastic laminated sheet top cover for mounting fixtures etc suitable all as specified for one light point controlled by one flame proof switch 16 Amps 1 way complete all as specified and as directed.
Supply and fix LED light fitting 1x16 Watt, flame proof, CMRI certified recomended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixture driver, holders, connector etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F switch flame proof rotary type with termination box in LM6, 16 Amps, single pole 230 voltscomplete all as specified and directed.
M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 6 Sqmm (nominal area) each and one single core 4 Sqmm (nominal area) as earth continuity conductor drawn into Steel conduit in concealed including all fittings complete all as specified and directed. NOTE: (i) Rates for Steel conduit with accessories are deemed to be included in the unit rate complete all as specified and directed. (ii) 2x 6 sqmm+ 1x 4sqmm and conduit shall be measured as one run. (ii) Two run of 6 Sqmm and one run of 4 Sqmm copper cable shall be measured as one length.
S&F Flame proof, weather prood distribution board 8 way (one MCB SPN as incommer and six MCB SP as outgoing) conforming to standards IS 2148 : 2004/ICE 60079-1 (2001) made up to LM6 material epoxy polyester powder coated including suitable size busbar complete all as specified and directed.
S&F MCB DP 32 Amps, 10 KA , 230V AC, ISI marked as per IS/IEC 60898-1 2002, IP 20 protected complete all as specified and directed.
S&F MCB SP 16 Amps, 10 KA , 230V AC, ISI marked as per IS/IEC 60898-1 2002, IP 20 protected complete all as specified and directed.
M&L for single pointed air termination copper rod 12mm dia and 300 mm long including support block complete all as speicified and as directed.
M& L for fix Aluminium strip 25x3 mm as a roof conductor or down conductor complete all with saddles and fixing screws for fitting the strip above ground complete all as specified and directed .
M&L for HDPE/porceiline insulator suitable for fixing earthing strip to the wall / floor/pole or any indicated location etc all as specified and as directed
M&L for fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm , drilled and screwed including 3 nos. 8mm dia 25 mm long hex. head screw, complete with suitable polycaronate box with locking arrangement all as specified and directed .
M&L earthing complete with copper plate electrode 600 mm x 600 mm x3.15 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to copper strip 20 x3 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., including testing on completion complete all as specified.
Supply and laying GI tubes light grade ISI marked , galvanized, 40mm bore laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed .
Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 2 core including taking down old/ unsv cable any type complete all as specified and directed.
Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in any type of soil and getting out complete all as specified and as directed.
Returning, filling soil in trenches including spreading levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches ,duly punning to a thickness of 18 cm complete all as specified & directed. Note: Thickness after punning shall be measured for payment
Supply and lay sub class B bricks, well burnt, best quality locally available bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed
M/S RAJINDER KUMAR (BID ID -3393549)
JAMWAL CONSTRUCTION CO (BID ID -3391397)
M/S BADRI NATH GUPTA (BID ID -3393585)
SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3393017)
MEELU ENTERPRISES (BID ID -3394262)
VIKAS ENTERPRISES (BID ID -3391806)
M/S MANHAS ENTERPRISES (BID ID -3392547)
M/S KABIR CHOUDHARY (BID ID -3393773)
M/S Farooq Ahmed Bhat (BID ID -3391177)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .