Special Repair for Executive Engineer office under Provincial Division Sub No. 2, PWD B and R in District Kurukshetra.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6)

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth. (HSR-10.38)

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. [HSR. 10.82 + 10.95 (a)].

Cement concrete 1:1:2 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.86 + 10.95 (b))

Fe-500 E.Q.R. TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. (HSR- 18.22)

First class brick laid in cement sand mortar 1:4 in foundation and plinth. .(HSR-11.4)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR 11.9)

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

11.43 cm thick brick wall laid in cement sand mortar 1:4 in superstructure (HSR 11.48)(a) First storey/stilt

Providing & Fixing PVC Rainwater/duly slotted IS-4985:1988 Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. Make:- Supreme, Finolex or Prince. [HSR 13.89]. (b) 150 mm dia PVC pipe 6 kg. pressure.

Providing and fixing PVC bend of ISI mark (HSR-13.90)(b) 150mm dia PVC Bend. Supreme, Finolex & Prince make

Providing & fixing False Ceiling with grooves with 12mm to 15 mm thick, 600mm x 600mm best quality mineral fiber tiles of approvede make fixed on MS Steel runners frame i/c cost of screws, angles, cleats, rawel plugs, with taping and paiting etc.complete in all respect as approved by the Engineer-In- Charge. (HSR 13.93).

Plastering on walls 10 mm thick cement plaster 1:3 (HSR 15.2) First storey

Plastering on walls 12 mm thick cement plaster 1:4 (HSR 15.5) First storey

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10).

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of-VITREOUS CHINA WARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge (HSR-30.5) (b) (ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LARGE FLAT BACK OR Angular lipped front Urinal 610MM High consisting of.COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge).White (HSR-30.25)

Providing & fixing in position best Indian make white lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item no. 30.41 above HSR 30.42 (i) size 610 mm x 510 mm with one no. tap

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE C.P.BRASS INLET CONNECTION 15 MM WITH 375 MM PIPE AND C.P. BRASS NUTS HSR (30.83)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Bib cock sparrow with Perimix and flange HSR (30.75) (B)

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer- in-charge)15 MM STOP COCK Concealed stop cock with flange HSR (30.76) (A) (II)

Providing and fixing C.P. brass liquid soap container of best quality (as required by the Engineer-in-charge). (HSR 30.77).

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.71 (a) (i)

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P. Brass screws, complete in all respect including cutting and making goods the walls etc.: (a) 25 mm dia, C.P. Brass adjustable. (i) 750 mm long. [HSR 30.68 (a)]

Providing and fixing in position best Indian make towel rails fixed in with RAW slugs embedded in walls with C.P. brass screws. complete in all respect including cutting and making good the walls etc. (e) C.P. brass towel ring (HSR 30.68 (e)

PROVIDING AND FIXING IN POSITION ON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TAP FOR LAVATORY SUITE (HSR 30.45)

Providing and fixing in position best Indian make Pedestal fittings of citreous chinaware complete (as required by the Engineer-in-charge) (HSR 30.44) (ii) Single colour

Providing and fixing in position best Indian make C.P. brass three tap holes mixer with pop-up-waste instead of one no. pillar tap and C.P. waste (HSR 30.46) (b)

Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

The Prayas Cooperative labour and construction society