Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC D 2 D 3 SIDCO INDUSTRIAL ESTATE METTUR DAM 636 402 | METTUR DAM | SALEM | TAMIL NADU | 636402 | ₹45.9 L Quoted ₹40.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹41.5 LRejected-AOC H 6 HOUSING UNIT MATHAIYANKUTTAI PO METTUR DAM 636406 | SALEM | TAMIL NADU | 636406 | ₹41.5 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | FIROZE FABRICATORS L1 | R K ENGINEERING CONTRACTOR L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for dismantling of eroded under bowl man hole door of size 590 mm x 605 mm x 25 mm thick with hinges, cutting the existing eroded under bowl door seating base frame of size : 590 mm x 605 mm x 25 mm tk. from the under bowl, clearing the cutting edges by grinding after providing of necessary scaffolding arrangements, Fabrication of under bowl door seating base frame of size : 590 mm x 605 mm x 25 mm tk. along with stiffener plate of size : 485 mm x 150 mm x 2 Nos. & 470 mm x 150 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame, Reconditioning of S/H under bowl door frame seating horizontal eroded flat surface of size 65 mm x 390 mm x 25 mm tk & vertical eroded flat surface of size 65 x 400 mm x 25 mm tk., welding the door seating base frame over the under bowl, cutting, removing & renewal of 25 mm square rope seating door frame groove, fabrication & welding of dia.50 mm x 100 mm length x 2 Nos door hinges and 2 Nos. of hinge seating socket including the cost of materials etc…, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of door including the cost of M20 x 55 mm full thread bolt & nut, Pitch:2.5 mm with spring washer etc…
(Required qty. of 25 mm tk. M.S.Plate and required qty. of under bowl door fasteners are under contractors scope). | 8 | Nos | 1,26,850 ₹10,14,800 | 1,27,000 ₹10,16,000 |
| 2.00 | Charges for dismantling of eroded RTD man hole door of size : 590 mm x 605 mm x 25 mm tk. 590 mm x 605 mm x 25 mm thick with hinges, cutting the existing eroded RTD door seating base frame of size : 590 mm x 605 mm x 25 mm tk. from the RTD, clearing the cutting edges by grinding after providing of necessary scaffolding arrangements, Fabrication of RTD door seating base frame of size : 590 mm x 605 mm x 25 mm tk. along with stiffener plate of size : 485 mm x 150 mm x 2 Nos. & 470 mm x 150 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame, Reconditioning of RTD man hole door frame seating horizontal eroded flat surface of size 65 mm x 390 mm x 25 mm tk & vertical eroded flat surface of size 65 x 400 mm x 25 mm tk., welding the door seating base frame over the RTD man hole door, cutting, removing & renewal of 25 mm square rope seating door frame groove, fabrication & welding of dia.50 mm x 100 mm length x 2 Nos door hinges and 2 Nos. of hinge seating socket including the cost of materials etc…, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of door including the cost of M20 x 55 mm full thread bolt & nut, Pitch:2.5 mm with spring washer etc…
(Required qty. of 25 mm tk. M.S.Plate and required qty. of RTD man hole door fasteners are under contractors scope). | 13 | Nos | 1,26,850 ₹16,49,050 | 1,27,000 ₹16,51,000 |
| 3.00 | Charges for dismantling of eroded mill separator body man hole door of size : 715 mm x 1,010 mm x 25 mm tk. with hinges, cutting the existing eroded mill separator body seating base frame of size : 590 mm x 605 mm x 25 mm tk. from the mill separator body, clearing the cutting edges by grinding after providing of necessary scaffolding arrangements, Fabrication of mill separator body seating base frame of size : 715 mm x 1,010 mm x 25 mm. along with stiffener plate of size : 500 mm x 160 mm x 2 Nos. & 800 mm x 160 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame, Reconditioning of mill separator body man hole door frame seating horizontal eroded flat surface of size 85 mm x 550 mm x 25 mm tk & vertical eroded flat surface of size 85 x 900 mm x 25 mm tk., welding the door seating base frame over the mill separator body man hole door, cutting, removing & renewal of 25 mm square rope seating door frame groove, fabrication & welding of dia.50 mm x 100 mm length x 2 Nos door hinges and 2 Nos. of hinge seating socket including the cost of materials etc…, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of door including the cost of M20 x 55 mm full thread bolt & nut, Pitch:2.5 mm with spring washer etc… (Required qty. of 25 mm tk. M.S.Plate and required qty. of mill separator body man hole door fasteners are under contractors scope). | 8 | Nos | 1,65,000 ₹13,20,000 | 1,75,000 ₹14,00,000 |
| 4.00 | Supply of Bearings for door Hinges (Bearing No.5118). | 28 | Nos | 2,900 ₹81,200 | 3,000 ₹84,000 |
Tender Value
Refer Docs
EMD Value
₹37,900
Closing Date
25 Aug 2025, 2:00 pmClosed
CE/ MTPS2
O/o.CE/ MTPS2
Reconditioning of mill under bowl
2025_EB_594207_1
OT 135 Reconditioning of mill under bowl
Open Tender
Maintenance Works
30 days
MTPS2
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹37,900
Yes
2 Feb 2026
18 Aug 2025
26 Aug 2025
18 Aug 2025
25 Aug 2025
18 Aug 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid