PLINTH AND EARTHING WORK IN EUDD FARRUKHABAD

Amount

Laying and Jointing PVC Pipe. Heading

Construction of T/F plinth (FOR 100/250/400/630) KVA of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cement, sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimeter. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor)

CHEMICAL PIPE EARTHING -The hollow pipe used in the chemical pipe earthing is fitted with a G.I. strip 50x6mm and CCM (Crystalline conducive mixture) is compressed in to the pipe and pipe is sealed at both the end. CCM is a semi metal and the hollow pipe filled with CCM behave like a salt pipe and therefore the current carrying capacity increases substantially. The CCM has a high melting temperature of 2500°c and unlike coal it will not burn into ashes under high temperatures of 1500°c under high fault currents occurring due to phase to phase or phase to earth fault. (All the material will be arranged by the contractor)

Cartage Refilling

New Cartage for Printer

M/S Sushil Kumar

M/S ANURAG MISHRA CONTRACTOR & SUPPLIER