REPAIR TO COMPOUND WALL, RCC JALLIES GATE PILLORS AND FENCING IN DOMESTIC AREA AT AIR FORCE STATION PATHANKOT

Amount

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge

All as above item No 01 above But except bricks complete all as specified and directed by Engineer-in-Charge

Providing precast cement concrete in repair , PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 40mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified and directed by Engineer-in-Charge

Reinforced cement concrete (nominal mix) 1:2:4 (12.5 mm graded aggregate), type B-0 (using 12.50mm graded crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including demolition the existing complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete ( re-inforced) in any description and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge

Form work to soffits of beam and shelves and like flat rough finished complete all as specified and directed by Engineer-in-Charge

Form work to edges of concrete flat rough finished thickness and not exc 20cm thick complete all as specified and directed by Engineer-in-Charge

MS TMT Bars 10 dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge

MS TMT Bars 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge

Rendering of 15mm thick in CM 1:4 on other than fair face of brick work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Rendering of 10 mm thick in CM 1:4 on fair face of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Preparation of newly plastered surfaces and applying two coats of acrylic exterior emulsion paint as approved of any shade/colour over a coat of primer as per manufacture instructions complete all as specified and directed by Engineer-in-Charge

Dismantling post or struts (wood, steel or RCC) any section incl taking out embedded portion in natural ground and making good complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for any specific location complete all as specified and directed by Engineer-in-Charge

Excavation in post hole each in any type of soil n. exc. 0.5 Cum filling in and ramming earth broken rubble mixed with earth around, in layers n. exc. 25 cm watering and removing surplus spoil to a distance n. exc. 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge

PCC (1:5:10) type E-2 using 40mm graded aggregate as in fdn/mass filling, conc complete all as specified and directed by Engineer-in-Charge

Supplying and fixing post and struts/faltiron in fencing all necessary drilling bolting or reveting etc and similar work confirming to Fe -290 gde 165. complete all as specified and directed by Engineer-in-Charge

Preparation of new steel surfaces including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

M & L for black bituminious paint of two coat of any description wood, steel, iron, concrete, brick, stone surface etc. exc. 10 cm in width or girth complete all as specified and directed by Engineer-in-Charge

Chain link fencing using 4mm dia GI wire 75x75mm mesh (weight not less then 4 Kg/ Sqm) including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire and dismantling of existing chainlink fencing complete all as specified and directed by Engineer-in-Charge

Supply and fixing hexagonal bolts, nuts 5mm to 10 mm dia and length of bolt ecx 5cm but n. exc. 10cm long complete all as specified and directed by Engineer-in-Charge

Supply and fixing M S round bars 10mm dia line wire for fixing of chain link fencing cut to length bent to shape reqd including cranking bending and binding with complete all as specified and directed by Engineer-in-Charge

Framed work as in doors of gates of angles or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

Mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or revets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and directed by Engineer-in-Charge

KUMAR TRADING CO

Vijay Kumar Contractor and Engineers

M/S HEAVEN BUILDERS AND ENGINEERS

pardeep singh marwaha

M/S SATYA CONSTRUCTIONS

M/S G P MARWAHA

M/S SOHAL CONSTRUCTION CO