Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.2 L+₹1.8 L (5.82%)Rejected-Finance 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L2 | Rejected-Finance Not being Lowest | |
| 3 | L3₹33.3 L+₹2.9 L (9.41%)Rejected-Finance | L3 | Rejected-Finance Not being Lowest | |
| 4 | L4₹33.7 L+₹3.2 L (10.5%)Rejected-Finance | L4 | Rejected-Finance Not being Lowest | |
| 5 | L5₹34.4 L+₹3.9 L (12.9%)Rejected-Finance | L5 | Rejected-Finance Not being Lowest |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
27 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-58/2022-2023 SPL REPAIR TO BLDG NO P-492 AND OTHER SANCTIONED WORKS UNDER AGE B/R II AT CHANDIMANDIR
2022_MES_547880_1
GE/CHM-58/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹77,000
Yes
17 Nov 2022
26 Aug 2022
4 Oct 2022
26 Aug 2022
27 Sept 2022
13 Sept 2022
Amount
Taking down cement plaster on brick / stone walls or ceiling including raking out joints, hacking for key, scrubbing down with water, etc , complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), compound complete all as specified.
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Glazed ceramic tiles coloured tile in vertical surface, straight cut /edge , size 450mm x 300mm x 7mm thick ,joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Vitrified ceramic tiles, coloured. light shade, jointless, 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
All as per serial item No 13 herein before but on vertical surfaces like riser of steps, skirting, dado etc laid over & including 10 mm thickcement mortar (1:4)
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid in any mortar complete all as specified and directed.
Material and labour 20mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed oncooking platforms, floors and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Taking down, chipping and removing the loose, split, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforcement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 10 metre (Appx) complete all as specified and as directed. Note:- Make;- Dr fixit/ Sunanda/chemestik/fosrock.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.
Taking down shutters of any description, area exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked complete all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 30mm thick of second class hard wood (Hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Solid PVC frame having profile 75mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws , complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
Butt hinges 100mm long, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
Aluminium anodised barrel tower bolt 200mm long, of extruded section and fixed, complete all as specified and directed.
Aluminium anodised barrel tower bolt 150mm long, of extruded section and fixed, complete all as specified and directed.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 125 mm, ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, fixed as in repair complete all as specified.
Solid PVC board 18mm thick, in repair, of any colour as in kitchen cupboard shutter, shelves, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free complete all as specified and directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 40mm (when open) complete all as specified and directed.
40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.
Material and labour for magnetic catcher or ball catcher with 8mm dia steel ball and brass body and striking plate including letting in, fixed as in repair complete all as specified and directed.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples, complete all as specified & directed.
stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples, fixed in repair, complete all as specified & directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted orForged into spikes,Framed guard bars, barred iron doors, ladders,Framed balusters, walk ways, raillings,Frame work of water tanks and similar work confirming toFe-290 grade E-165, complete all as specified & directed by Engineer-in-charge.
Steel window, in repair box type, one shop coat of primer, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 03Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 47 hereinbefore but without glazing bar.
Dismantling wrought iron or mild steel as in gates, grills, posts etc or in any description not otherwise provided for, complete all as specified and directed
Rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe 290 (Gde -E-165 quality B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing, complete all as specified & directed by Engineer-in-charge.
Material and labour rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.410W.Gde-E-250, fixed as in repair complete all as specified.
False ceiling board of Everst designer oard of size 595mm x 595mm x 4mm fixed on pre coated GI Everest main runner 38mm x 24mm cross tee 29mmx 24mm and wall angle 24mm x 24mm and suspended with 4mm dia GI wire including clips as in patterns as approved by GE, in panels of size 600mm x 600mm fixed in ceiling with necessary fittings and fixtures as per manufactures instructions, in repair complete all as specified and directed. MAKE : Everest or equivalent make as approved
Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
Three coats of white washing on new wall surfaces including preparation of surfces, complete all as specified and directed.
Three coats of white washing on new ceiling surfaces including preparation of surfaces, complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Applying two coats of oil bound distemper on new plastered wall surface over a coat of chalk whitening, complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Two coats of white washing on old ceiling surfaces including preparation of surfaces complete all as specified and directed.
Two coats of white washing on old wall surfaces including preparation of wall surfaces complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed as in repair complete all as specified & directed by Engineer-in-charge.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes fixed in repair, complete all as specified and directed.
Vitreous china, wash down water closet pan, Pedestal pattern coloured with ‘P’ or ‘S’ trap in and, including PVC flushing cistern 10 ltrs capacity with seat cover, complete set, fixed in repair complete all as specified and directed.
Supply and fix vitreous china, pedestal type one piece compoite closet type, of 'P' trapwhite colour including seat cover complete all as specified and directed. MAKE : JAQUAR Cat Part No ONS-WHT-10753P180UFSM or equivalent in CERA / PARRYWARE
Corner glass shelf Chromium plated with brackets, fixed as in repair complete all as specified and directed. MAKE :JAQUAR Cat Part No ACN-CHR-1173 or equivalent in PRAYAG/CERA
Glass shelf of size 500 x 125mm Chromium plated fixed with chromium plated steel screws and plastic cleats, fixed as in repair complete all as specified and directed. MAKE : PRAYAG Cat Part No BEA-45 or equivalnent in Appx 'C'
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Reinforced cement concrete, type A-1 (1:2:4), using 12.5 mm graded stone aggregates as in slabs supported on walls, beams and Chajja, columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Mild steel high strength deformed TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
Chromium plated pressure jet for western type water closet with PVC connections 600 to 900mm long including brass head screw and suitable washer, fixed as in repair complete all as specified & directed
Vitreous china, table top wash hand basin, of size 700pastel colour including waste coupling and waste pipe, fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No ARS-WHT-39903 or equivalnent in Appx 'C'
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Wall Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed
Stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Angular stop cock, brass, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No QQT-7053 or equivalnent in Appx 'C'
Bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms), fixed as in repairs complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed as in repair complete all as specified and directed.
PVC (SWR) rain water pipe, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed.
75mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, complete all as specified in SSR Part-I and all as directed by Engineer-in-charge.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210gms ), fixed as in repair complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white of size 550X400mm, fixed on and including waste fittings, brass chromium plated coupling, pillar tap,MS angle bracket 450mm long of size 35x35x5mm ,embeded in wall with PCC 1:2:4 , fixed in repairs, complete all as specified and directed.
Material and labour, cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.
Supply and fix, concealed steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors or concealed (partly) fixed as in repair complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof, mixed with water proofing compound, finished fair and even without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)
75mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, rough finished complete all as specified and directed.
Rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces and finishing the surface even and fair without using extra cement, all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Water proofing treatment to SUNKEN PORTION and adjoining walls of kitech. WC, Bath & Toilet etc. : 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion while the concrete is green :- (a) Apply cement slurry to the surface @ 0.488 kg / Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified in Appx 'B'. (f) Testing of all traps & Joints shall be done after sealing & before filling of sunken slab
Plain cement concrete 1:5:10, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.
Material and labour providing cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in roof kerbs rounded or chamfered edgescomplete all as specified and directed.
Supply only integral water proofing compound ISI Marked.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.0 kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions , complete all as specified & directed.
Drapery rod (conduit) of dia not less than 20mm having a corrugated virgin PVC extrusion on its surface and ABS plastic rings and finials of approved shed with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws fixed as in repair complete all as specified and directed.
Powder coated (thickness or powder coating of any colour coating not less than 30 micron) aluminum frame/ chowkhat /partition/ door /window/ventilator shutters made of aluminium sections (wall thickness of aluminium section not less than 2mm) including necessary joining cleats, glazing clips, rubber neoprene packing, handles , hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) The rate shall be inclusive of neoprene beaings, handles, hinges, screws etc weight of fitting/ fixtures will be measurd for arriving the weight of aluminium section (ii) Glass panes and panels shall be measured & paid separately under respective items as "Supply only" . Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
Supply only 5mm thick tinted sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
3mm thick coloured ACP sheets (Aluminium composite panel) as in partition, wall cladding, roof covering and fixed to MS frame/ wooden/ aluminium frame ,complete all as specified and directed.
Supply only 9mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed .
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge.
Cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply only chain link fencing of n.exc 4.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 116 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with coach screw and washer as in roof, wall , fencing etc complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, all as directed.
Material and labour for preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.
Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
PVC (SWR) floor trap 100mm bore with CP grating including jointing with solvent cement, including jointing to waste pipe set in cement mortar fixed as in repair complete all as specified and directed.
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
All as per serial item 127 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed
All as per serial item 127 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 127 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Switch piano, flush type, 16 Amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Sockets outlet multipurpose 2 in 1 pin, 6 and 16 Amps flush type ISI marked all as specified and directed by Engineer-in-charge
Sockets outlet multipurpose 2 in 1 pin, 6 and 16 Amps flush type ISI marked all as specified and directed by Engineer-in-charge
Electric Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, fixed in repairs, all as specified..
LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, fixed in repairs, all as specified..
Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.
Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit after taking out old unserviceable sub main wiring and making good the disturbed surfaces by wall putty/POP after mason work and finshing to match the original finishes ,all as specified and directed. Note : (i) For the purpose of measurement, 3 runs ( Phase, neutral and earth) of single core 06 sqmm cable shall be considered as 1 running metre. (ii) Cutting chases and PVC conduit will be measured and paid separately
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, all as specified and directed by Engr-in charge.
Sheet metal enclosure with double door for DBs conforing to IS 8623.III IP 43 protection shrouded neutral bar and cement spill protectior, SPN 8 way, 240 volt complete all as specified and directed.
Sheet metal enclosure with double door for DBs conforing to IS 8623.III IP 43 protection shrouded neutral bar and cement spill protectior, SPN 4 way, 240 volt complete all as specified and directed.
TPN distribution board double door flush mounting with provisions for MCBs, TPN 4 way, 415 volt IP 43 protection Complete all as specified and directed .
MCB, TPN, 40-100 Amp, 415 volts having breaking capcity 10 KA , 'C' series complete all as specified and directed
MCB, SPN, 240 volt, 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB, SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB doubple pole 240 volts 40 Amp 10 KA, 'C' series complete all as specified and directed
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete including dismantling of old earthing, all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.
GI bracket made of GI pipe medium grade of 40mm dia, 1.5 mtr long, bend to shape of 120 degre ,fixed on pole/wall with clamp of size 50x6 of suitable length fixed with nuts/ bolts and 1.5 sqmm 2 core, 1.5 metre long flexible wire from connector / ceiling rose to light fitting complet,e fixed in repairs, all as specified and directed.
LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Exhaust fan metalic body 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 1400 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed.
Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.
Supply and installation and testing of solar water heating system, flat plate collector type based on indirected transfer of heat, with heat exchanger of 500 litre per day capactiy stainless steel hot water tank with insulated with electrical heating back up AC 230 V single phase 3 KW element complete all as specified and directed.
Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
Cutting existing GI Tubing 25mm bore in any description including providing threads, insert of Tee unequal / equal for connecting new pipes etc complete all as specified and directed.
M/S Gupta and Sons
BANSAL BUILDERS
M/S Dhanpati Construction
KUNDRA CONSTRUCTIONS
m/s AR Construction co
Standard Const. Co.
SS BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .