REPAIRS TO ROOF, FLOORING, JOINERIES AND CONNECTED ITEMS IN OTM ACCN OF WING I AND V AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Disconnecting existing tanks exc 500 ltr but n. exc 1000ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Dismantling water tanks exc 500 ltr but n'exc 1000 ltr capacity and removing from site.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified.

500 Ltr Capacity

1000 Ltr Capacity

S & F ball valves, 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms).

S&F in repairs Gun-metal, globe or gate valves, 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Taking up or down tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed

25 mm dia

20 mm dia

15 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

25 mm dia

20 mm dia

15 mm dia

S and F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

25mm dia

20 mm dia

15 mm dia

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. with wire brush incl. flashing and junctions of parapets/kerb walls etc. and removing off the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Providing, cement concrete type B1, 1:2:4 ( using 20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed

M&L preparation of new steel surfaces of any description over exc 10 cm girth or width and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Demolition of brick work or stone boulder masonery built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L for polygonal rubble mesonry, uncoursed well bonded bedded and solidly hearted built in cement mortar 1:6

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m meanradius, built in cement mortar 1:6 complete all as specifed and directed

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L rendering 15 mm thick on stone surfaces other than fair faces of brick work in cement mortar 1:4 finished even and fair with out using extra cement complete all as specifed and directed

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces brick masonry surfaces or concrete surfaces and finishing even and smooth finish complete all as specifed and directed

M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed

M&L for for Preparation of newly plastered surfaces of any description and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed

S&F Second class hard wood 35mm thick plain framed factory made panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated.

S&F Second class hard wood, Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy abd fixed

S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, in opening all as specified and directed by Engr-in-Charge

Cutting holes exceeding half brick but n. exc full brick depth in brick walls in stone/Brick walls built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-O

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed

S&F anodised powder coated aluminium door shutters, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nombers in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed

M&L Screed bed or bedding layer 20 mm thick of cement mortar 1:6. for laying floors finishes .

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note: screed bed layer, cement motar measured seperately

S&F Providing precast cement concrete type C1, 1:3:6 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.

Demolition of concrete on ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified.

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in sub floors, sub bases, floors and paving concrete as directed by Engineer in Charge

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for screed bed or bedding layer of 15mm thick for laying in cement mortar 1:6 floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light/dark shade area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Alpha Construction

Anand Trading Co

M/S MANISH CONSTRUCTION CO

Vishal Constructions

UNITED ENTERPRISES