Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹33.5 L+₹2.0 L (6.47%)Rejected-Finance 203 VARDHMAN ENTRANCE PLAZA LSC NASEERPUR DWARKA SECTOR 1A PHASE 1 NEW DELHI 110075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹35.3 L+₹3.8 L (12.1%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹35.5 L+₹4.0 L (12.6%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹36.3 L+₹4.9 L (15.5%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L5 | Rejected-Finance Other than Lowest |
Tender Value
₹41.7 L
EMD Value
₹83,400
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
GE UTILITY PLANT AND MACHINERY KIRBY PLACE DELHI CANTT-10
REPAIR MAINTENANCE OF COOLING TOWER AND CONNECTED WORK UNDER GE(U) PM DELHI CANTT10
2023_MES_616265_1
GE(U)/PM/D-40/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
DELHI CANTT-10
MES contractor enlisted under class D category c (i) having deposited standing security of Rs 100000 with department. Contractor not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and cat
6 documents required · 6 mandatory
₹500
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
₹83,400
Yes
21 Nov 2023
29 Aug 2023
28 Sept 2023
29 Aug 2023
26 Sept 2023
12 Sept 2023
Amount
Dismantling of existing worn out electric motor of CT Fan of cooling tower and S&F in repair with testing and commissioning totally enclosed weather proof IP-55, Flange Mounted Extended Shaft electric CT Fan Motor with following specification complete all as specified and as directed:- (a) three phase squirrel cage motor, Capacity 7.5 HP, 960 RPM, 415V, 50HZ with all connected accessories and all fitting suitable for 280 TR cooling tower. (b) Each tower having 02 Nos. Motor Make for Motor:- Kirloskar / Crompton Greaves / ABB / GEC
Dismantling of existing corrosion proof PVC fill from the induced draft type cooling tower of fibre glass reinforced plastic (FRP) casting rectangular/other type construction for Cooling tower of 280 TR capacity complete with all accessories and supply and fix new corrosion proof both edge folded PVC fill and inlet louvers, drift , eliminators hot water distribution pipes and nozzles etc complete all as specified and as directed. Make :- Weldon / Delta / Mihir / Polo Note: (a) The spray system should be work satisfactory even with 50% reduced flow of water. (b)The induced draught cooling tower should be operate according to the counter flow principle. (c) Cooling tower specification for PVC filling Size 600X 300X 150 MM both edge folded (d) The nos. of fins should be as recomended by OEM for 28. TR cooling tower.
Dismantling of existing damaged CT Fan and S&F in repair CT Fan complete section Fan, Fan Dia-1200 mm 06 Blades connected GI nut bolts and accessories all fitting suitable for 280 TR cooling tower Each tower having 02 Nos. of fan complete all as specified and as directed. Make :- Weldon / Delta / Mihir / Polo
S&F in repair / Replacement of worn out Rectangular / Square type shape and FRP induced draft type counter flow cooling tower body, casting by fibre glass reinforced ,casing & basin(FRP), over all dimension (LXWXH )-3600x4200X 3300(mm), suitable for 280 TR cooling tower, complete as per manufacturer's design/specifications with all fittings complete all as specified and as directed. Make :- Weldon / Delta / Mihir / Polo
Repair / Replacement of Rectangular / Square type shape and FRP induced draft type counter flow, cooling tower Fan Guard, Motor Frame and all Metallic Supports by new MSHDG type mechanical equipment supports, electroplated hardware, drain connections, suitable GI inspection ladder, steel supporting structure, anti vibration mounting etc, suitable for 280 TR cooling tower, complete as per manufacturer's design/specifications with all fittings complete all as specified and as directed. Make :- Weldon / Delta / Mihir / Polo
Material and Labour for frame work with angle iron for frame support, with fabrication, welding joining including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including taking down old unserviceable one complete all as specified and as directed.
Supply and fixing in replacement cast iron Y strainer flenged ends with SS perforated sheet screen of following size complete all as specified and as directed. (Make: - Emerald / Rapid Cool / Leader).
100mm dia
150mm dia
200mm dia
250mm dia
300mm dia
Supply and fixing in replacement cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 16 of following size dia complete all as specified and as directed. (Make: - ADVANCE/ AUDCO/ LEADER/CASTLE/ NVR/ ZOLOTO).
300 mm dia.
250 mm dia.
200 mm dia.
150 mm dia.
125 mm dia.
100 mm dia.
80 mm dia.
50 mm dia.
65 mm dia
M&L for cutting of existing MS/GI water mains of size 80 to 150 mm dia of chiller/condensor/cooling towers & GI pipes of make-up tanks of central AC plant at different points/section for replacement with new MS pipe in short lengths including MS fittings complete all as specified and as directed.
M&L for cutting of existing MS/GI water mains of size 150 to 300 mm dia of chiller/condensor/cooling towers & GI pipes of make-up tanks of central AC plant at different points/section for replacement with new MS pipe in short lengths including MS fittings complete all as specified and as directed.
Taking out old unserviceable MS pipes and Supplying & laying , commissioning & testing mild steel (Heavy) 'C' class pipe of size 80 mm dia on exposed surface / underground (in trenches) including welding works, connections with existing chilled water line, chiller, pump, fabrication of bends, MS flange, tees, reducers, shoe, support (brick masonry block & wooden support for underground / MS angle- clamp & wooden support for exposed surface) along with priming coat of steel primer as per standard specification complete all as specified and as directed. Make :- VPL / Jindal / Tata / Oswal. Note:- (i) The rates quoted by the contractor shall deemed to include the cost of MS fittings required during laying of MS Pipes. (ii) The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be heavy class of thickness min. 7mm as per IS: 3589. (iii) Cost of excavation, returning, filling and removing shall be paid separately under relevant item.
Ditto all as per item No. 11 here-in-before but of size 100 mm.
Ditto all as per item No. 11 here-in-before but of size 125 mm.
Ditto all as per item No. 11 here-in-before but of size 150 mm.
Ditto all as per item No. 11 here-in-before but of size 200 mm.
Ditto all as per item No. 11 here-in-before but of size 250 mm.
Ditto all as per item No. 11 here-in-before but of size 300 mm.
Supply and fixing in replacement ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 800 Amps Make :- Havells / C&S Electric / Standard / Indo Asian / Denson
Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-32 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed. Make :- L&T / Siemens / ABB
Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-25 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed. Make -L&T/Siemens/ ABB
Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-18 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed. Make -L&T/Siemens/ ABB
Supply and fixing in replacement over load relay 30-50 Amps complete all as specified and as directed. Make -L&T/Siemens/BCH/Schneider
Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and as directed
S&F Red sand stone jali 40mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. including dismantling of old Jali and removing atleast 1.5 KM away from MoD land complete all as specified and as directed.
Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed
M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and as directed
S&F 80 mm thick, machine pressed rubber moulded, glossy coloured, precast concrete interlocking paver block any shape and size of M-40 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand complete all as specified and as directed. Make :- M/s Ultra Tiles / Nitco / Pavit / Sunshine Industries (Shino Tiles)
Dismantling of existing worn out electric motor of CT Fan of cooling tower and S&F in repair with testing and commissioning totally enclosed weather proof IP-55, Flange Mounted Extended Shaft electric CT Fan Motor with specification three phase squirrel cage motor, Capacity 5 HP, 960 RPM, 415V, 50HZ with all connected accessories and all fitting suitable for cooling tower complete all as specified and as directed. Make for motor :- Kirloskar / Crompton Greaves / ABB / GEC
HVAC Engineering Co
ASHUTOSH BUILDERS
SANJEEV ENTERPRISES
M P TYAGI ENGINEERS AND CONTRACTORS
Shiv Enterprises
Akarsha Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .