CWE/P-36/2020-21 SPECIAL REPAIR TO BLDG NO NP-05 (OTM ACCN) AT BHADURIYA COMPLEX UNDER GE (SOUTH) PATHANKOT

Amount

M & L Dismantling of brick tile or terracing tiles, laid bedded and pointed in any mortar in floors, roofs, channels, kerbs, arpons etc. (each layer) complete all as specified.

M & L Demolition of mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified.

M & L Removing excavated soil/material exceeding 250m but not exceeding 500m and depositing where directed complete all as specified.

M & L Preparing the roof surface by watering and brushing neat cement slurry with 3.0 Kg of cement per sqm and 10 mm thick rendering in cement mortar 1:3 mixed with integral water proofing compound (liquid) @ as per manufacturing instructions by weight of cement on RCC roof slabs surfaces, finished even and fair without using extra cement complete all as specified and directed.

M & L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding of average thickness n exc 75mm, and finishing the surfaces even & fair without using extra cement, complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and directed.

Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr per Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

M&L 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per item no 08 here in before but except tiles

M & L Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each and removing from site complete all as specified.

M & L Taking down chowkats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified.

Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each all as specified & directed

S&F for steel windows with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter, wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and including 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2 complete all as specified.

S&F steel ventilator with tubular frame factory made of size 79mmx39mm, 16 gauge rectangular tubular frame with side hung shutter ,bottom portion glazed and top portion gauzed shutter with glazing bars 12x3mm flat iron including projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and including 10mm square bar grills and frosted glass and wire cloth complete, including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L 35mm thick 2nd class soft wood plain, framed, panelled (factory made) shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial face veneers fitted to chowkats of size as IS-1003 Part-01, complete all as specified and directed.

M & L 2nd class Hard wood 35 mm thick Glazed/gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters in wire mesh door as specified in SSR Part I, Section 8, Clause 20 (a) complete all as specified and directed.

M & L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), solid core panal design with 5 mm thick 3D wood grain printed (multi colour) PVC Sheet Polyurethane printed on the front face and 5mm Prelam PVC sheet on back face, complete all as specified and directed

M & L factory made solid PVC puff door frame of size 90x55mm made out of 5mm thick plain colour PVC sheet with one or more rebate reinforced with MS square tube fixed in opening as per specification and drawings No CEPZ/TD-378 / 11 sheet No 1/1 etc complete all as specifed and directed.

M & L 1.25mm thick pressed steel frames of size 105 x 60 mm for doors /windows with one or more rebates including necessary fixing lug, hinges, lock strike plate, including filling of concrete type C-1 (using 20mm graded crushed stone aggregate), 1:3:6 back of chowkhats complete all as specified and directed

M & L 1.25mm thick pressed steel frames of size 125 x 60 mm for doors /windows with one or more rebates including necessary fixing lug, hinges, lock strike plate, including filling of concrete type C-1 (using 20mm graded crushed stone aggregate), 1:3:6 back of chowkhats complete all as specified and directed

S&F Stainless steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, ISI marked all as specified.

S&F Aluminium anodised, barrel tower bolts of extruded section of size 200mm ISI marked and fixed, complete all as specified and directed.

S & F for aluminium handles 150mm cast type anodised complete all as specified and directed

M&L of two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, complete, all as specified.

M & L Preparation new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples or nut and bolts including MS flat strip as required at site , complete all as specified.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

M & L Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

M & L Removing old lime wash (if any) hacking for key,raking out joints of old brick work or stone work built in cement mortar not previously plastered,and scrubbing down with water etc. to receive plaster complete all as specified.

M & L 15mm thick rendering in cement mortar 1:4 on fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M & L 15mm thick rendering in cement mortar 1:6 on fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for two coat of cement base paint over a coat of primer to newly plastered surfaces of walls including prepration of surfaces as specified and as directed .

M&L complete removal of existing treatment on surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper over and including a coat of approved primer, complete as specified and directed.

M&L complete removal of existing treatment on surfaces of wall and applying two coats of oil bound distemper over and including a coat of approved primer, complete as specified and directed.

M& L Preparing new plastered surfaces of wall and applying three coat of white wash on walls complete all as specified and directed.

M&L Complete removal of existing treatment on surfaces of wall and and applying three coats of white wash on walls complete as specified and directed.

M& L Applying three coats of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified.

M& L complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash including complete all as specified.

Supply and fixing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe with coupling fixed complete all as specified..

S&F in repair Vitreous china Wash hand basin, white, oval type of bowl size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

Supply and fixing in repairs, Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with including CI 'P' or 'S' trap, front and back inlet and foot rests, any pattern (excluding supply but including provision of flushing cistern and flush pipe) including provision of cement concrete bedding and complete, all as specified and as directed.

S&F in repair Vitreous china Wash down water closet pan (EWC) pedestal pattern, white including fixing bolts, excluding supply flushing cistern and flush pipe) including connection to down or out going pipe and to flushing pipe anti symphonage pipe etc of approved quality, complete with CI 'P' or 'S' trap, complete all as specified.

Supply only plastic water closet seat, black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

Supply and fixing in repairs, 100 mm dia sand cast iron soil waste and vent ISI marked in any length with or without ears with end joints laid in floor complete all as directed

Supply and fixing in repairs, 100 mm dia sand cast iron soil waste and vent ISI marked in any length with or without ears with end joints fixed to walls complete all as directed

Supply and fixing in repairs, branch pieces, single with oval access door (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 100mm, complete all as specified.

Supply and fixing in repair cast iron bends with oval access door (any radius), with duck's foot or heel rest for ISI marked, bore of pipe 100mm, complete all as specified.

Supply and fixing in repairs, 75 mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with end joints laid in floor complete all as directed

Supply and fixing in repairs, 75 mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with end joints fixed to walls complete all as directed

Supply and fixing in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 75mm, complete all as specified.

Supply and fixing in repairs, Cast iron 75mm bore bends/ diminishing pieces / tapers (larger bore measured), ISI marked, complete all as specified.

Supply and fixing in repairs, 50 mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with end joints fixed to walls complete all as directed

M & L for extra over cast iron pipes and fitting if lead joints is provided in lieu of cement joint for 100 mm bore of pipe complete all as directed

M & L for extra over cast iron pipes and fitting if lead joints is provided in lieu of cement joint for 75 mm bore of pipe complete all as directed

Supply and fixing in repairs, Cast iron cowl 50mm bore, complete all as specified.

Supply and fixing in repairs, Cast iron floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed in cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), complete all as specified.

Taking up or down GI pipe of 20mm bore & connection including cleaning for refixing or removal unserviceable pipe from the site complete all as specified and directed.

Taking up or down GI pipe of 15mm bore & connection including cleaning for refixing or removal unserviceable pipe from the site complete all as specified and directed.

S&F Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid to walls, complete all as specified.

Fixing only old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

S & F 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

Supply and fxing rotational moulded polythene water storage tank three layered ( colour other than black), (cylindrical vertical with closed top ) closed threaded top cover 1000 litre capacity hoisted and fixed in position, including dismantling of any type / capacity of brocken old tank complete all as specified and directed.

S & F Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore complete all as specified and directed.

S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type with long shank with capstan head, screwed down, high presure , screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed.

Supply and fixing in repairs stop valve of cast copper alloy chromium plated with long shank concealed type screwed down high pressure screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

S & F in repairs brass chromium plated (ISI marked) shower rose 125mm size with or without swivel joints, any size, including fixing to 15 mm dia steel pipe or union all as specified and directed

S&F in repair 15mm bore Stop valve/angle valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed, complete all as specified.

S & F fixed in repair Pillar taps 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with ong screwed shanks and fly-nuts screwed for iron pipe and fixed with 15mm bore pipe.

Supply & Fix in repair for Vitreous China Urinal, full stall type white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F for urinal spreader of PTMT any color for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

M&L Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia D type Brass Chromium plated 60cm long between flangescomplete all as specified and directed.

M&L Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S & F for CP soap dish, any type, size, fixed to plugs with chromium plated brass screws

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc, including cleaning for refixing or removal to store .

S & F PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint laid in trenches/floor/walls as soil pipe(vent pipe)/weep holes, fixed, complete all as specified and directed.

S&F PVC (SWR) shoe of 110mm bore, complete all as specified.

S & F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L Cleaning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 Kg of cement per sq. metre complete all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 25mm thick cement concrete in sub base for receiving floor tiles and mass concrete using type B1, 1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:6 complete all as specified.

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over including 10 mm thick rendering in cement mortar 1:4 on verticle surface complete all as specified.

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

M & L Joint free coloured/ printed glazed ceramic tiles (first quality) of size 300 x 450 x 7mm thick on vertical surfaces such as dado with highlighter etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over 10 mm thick rough cement plaster to recieve tiles in cement mortar 1:4 complete all as specified.

M& L pre-polished machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and (mirror) polishing complete & including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

M & L Pre polished Kota stone slab 18-20mm thick fixed in vertical surfaces such as skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and (mirror) polishing & 10mm thick cement plaster to recieve stone in cement mortar 1:4 including demolition of existing wall skirting etc complete all as specified & directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

M&L 18 to 20mm thick granite (of approved type colour) work (table rubbed & polished) in horizontal surfaces laid over and including 15mm thick cement screed (1:6) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges where ever directed by Engr-in-charge, including providing hole for gas pipe throughout the depth of slab and granite complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engr –in Charge

M&L for rendering 15mm thick in cement mortar 1:2 and mixing with WPC (liquid) @ 3% or as per manufacturer instructions complete all as specified

S&F applying evenly a coat of blown type bitumen at the rate of 1.50 kg per sq metre and binding with clean dry sand @ 0.05 cum. Per sqm complete all as specified

S&F polyethene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified

M&L rendering 10mm thick on concrete surface in cement mortar 1:3 in facia or edging of chajjas, ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to cracked RCC surface in true line /shape by providing RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate including all necessary form work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed by Engr-in charge. NOTE- the rate will be inclusive of scafolding for single or double storey including making hole in brick work and making good in cement mortar.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), including removing rubbish/debris outside defence land complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finsishing the surface even and smooth without using extra cement laid to slop 1:12 including necessary form work to divied the area in panel and providng 6mm thick joint through the thickness of plinth protection duly filled with mastric filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight)complete all as specified and directed

Supply and fxing , 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified.

M & L walling of random rubble stone masonry uncoursed , well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified.

M & L raking out joints / Pointing to random rubble or polygonal rubble uncoursed or brought up to course. Work built in mud mortar, complete all as specified.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 109.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 109.00 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 109.00 here in before but for one light point controlled by two way switch all as specified and directed.

M&L Point wiring for 15 Amp socket point controlled by one switch with 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Switch piano flush type 5 Amp single pole one way, (ISI marked), complete all as specified.

M&L socket outlet 6 pin, 5 & 15 Amp multipurpose 2 in 1 flush type,complete all as specifed.

M&L socket outlet combination 2 in 1 , 3 pin 5 Amp flush type all as specified & directed.

M&L Switch piano flush type 5 Amp single pole two way, (ISI marked), complete all as specified.

M&L Switch piano flush type 15 Amp single pole one way, (ISI marked), complete all as specified.

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing, charging time 10-12 hours and back up time 04 hours, IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. Notes: (i) LM79 report from third party (instead of company in house lab) NABL/UL accredited lab (ii) LM 80 report from LED manufacturer (iii) Test certificates to be submitted before commencement of work/ claiming for payment . (iv) Warranty certificate for minimum 2 years to be submitted from OEM.

M&L Ceiling rose, 3 terminal of bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

M&L Lamp holder Polycarbonate type with back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

Supply and fix LED Lamp inverter type 09 watt 230 volts,50 Hz, ,lumen 900 lm, rated current 45 mA, CRI less than 80, Charging time 8 to 10 Hours, operating temperature -10 to 50 degree celcius,back up time 04 Hours, complete all as specified and directed.

Supply and fixing in replacement existing unsv integrated LED bulk head light fitting 1X10 watts IP-65 protection connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

Supply & Fix Ceiling fan AC single phase 220/240 volts of size 1200 mm, 50HZ, PF>0.95, Air delivery approx 230 cum/min with 5 speed control . Make havells efficiancia(BLDC 32 watt) PAnasonic model DC F-12XDA (BLDC) or equivalent in Bajaj/Orient, sweep complete (BLDC) Motor complete with Canopy,complete of approx wattage 30 to 32 type BEE 5 star rated including blade ,down rod etc including connecting to ceiling rose all as required or directed. Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

S&F in replacement existing unsv distribution board iron clad, with double door IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with including one MCCB 4 pole 415 volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board and including cutting chases to walls for fixing DB and making good the disturbed wall surface all as required at site or directed(Outgoing MCB will be measured separately)

S&F in replacement sheet metal enclosure factory made (Double door) type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete, single pole and neutral, 240 volts, 50 Hz, 8 way with 200Amps rated copper bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

M&L for replacement of existing unsv MCB single pole 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimbles for outgoing cables complete all as specified.

M&L for replacement of existing unsv MCB SPN 240 volts any rating from 20 to 32 amps, with rupturing capacity 10 KA, including providing thimbles for outgoing cablescomplete all as specified.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 4 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 4 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 4 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

M&L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earth lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:3:6 type C-1 with angle iron frame made of angle iron of size 40x40x4, adequate quantity of salt charcoal dust and salt layers all around the earth plate excavation, earth work in any type of soil, removal of excavated soil and returning filling in all as required at site completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

S&F water heater storage type , electric capacity 50 ltrs. BEE 5 star rating including hot and cold water steel braided pipe including dismentling old unsv and depositing to MES storeyard

S&F PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

Supply and fixing in repairs stop valve of cast copper alloy screwed down high pressure with handle screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

S&F in repairs bib taps 15mm bore of cast copper alloy with capstan head CP screwed down, high presure , woth or without letter hot or cold of size 15 mm dia fixed, complete all as specified and directed.

S&F in replacement of existing unsv sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and sockets 20 amps 240 volts complete with one single pole MCB of 20 amps complete all as specified and directed.

S&F in replacement existing UNSV sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose usning PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as directed or required at site.

Supply & Fix Exhaust fan AC sinlge phase 230/240 volts of size 300 mm sweep steel body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed and depositing to MES storeyard. Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

Supply & Ventilation fan AC sinlge phase 230/240 volts of size 200 mm sweep having plastic body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

Supply laying jointing and testing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core complete all as specified. Note : Earth work , sand cushioning, GI pipe , brick covering for mechanical protection will be measured and paid separately under respective item of Schedule.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation laying poles, all as required for laying cables in any type of soil and getting out, complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

M & L Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class 'B' bricks of old size (230x115x75mm) or of size locally available, laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge.

Supply, installing, testing and commissioning of LED street light fitting 45 watt fixed on Bldg comprising of epoxy powder coated housing, enclosed with glass cover in frame, for efficiency not less than 95 lumen /Watt, and minimum wattage capacity of 45 W with ingress protection IP 65/66 and external SPD of capacity 10 KV in addition to in built drive complete, fixed to 25 mm dia medium grade GI pipe bracket of length not less than 1.20cm bend to 120 degree shape with necessary GI clamps 50mmx6mm MS strip bend to require shape, nut bolts etc and 1.5 sqmm 3.5 Core PVC fleible copper cable from junction box to fitting to be layed/drawn inside steel tubler pole complete and testing on completion all as specified and directed. Note : i) MS clamp fitting with nut bolts and GI bracket will be measured and paid separately. ii) Minimum 2 years of guarantee period of LED fittings. iii) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt . iv) Power factor more than 0.9. v) Contractor shall submit LM 79 and LM 80 test reports from manufacturer from approved laboratory.

Supply, installation, commissioning of water cooler electric driven ( single phase ), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour and stainless steel tank pre-coated body, adjustable cold water thermostate auto cut out overload compressor protection single phase 240V, 50 Hz working in R 134 Refrigerent. complete all as per specified and directed by the Engineer-in-Charge. Make: Voltas / Blue star or Equivalent of make as approved by HQ E-in-C's Branch.

M&L 20mm thick ultra voilet printed PVC board (weight not less than 12 Kg/Sqm) with one side decorative choice laminates and other side balancing white as in kitchen cabinet , cupboard, frame of cupboard etc fixed with screws to steel/PVC/timber frame work complete all as specified and as directed by Engineer -in-Charge

S&F Continuous (piano) hinges, ISI marked mild steel, bright finish or electro galvanised with width of flap (when open) 30mm complete all as specified and as directed.

Supply and fix hasp and staple of size 100 mm long, aluminium anodised (ISI marked), including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in coping/benching and sub base and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

Demolition of reinforced cement concrete (RCC) not exceeding 15 cm thickness below or above ground level complete all as specified and directed.

S&F in repairs 25 mm dia mild steel curtain rod pre-painted synthetic enamel paint of wooden finish fixed with screws complete all as specified and directed.

S&F in repair wooden bracket (turned, weathered and mitred) brackets of Ist class hard wood pre-polished with French polish and touch wood with cut, hole suitable for 25 mm dia rod fixed with screws and gutties in wall complete all as specified and directed..

All as per Srl item no 154 here-in-before, but end caps with wall ornament and fixed to curtain rod with screws of design/shape complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

jagdambe traders

M/S Satpal and co.

Ms Dalip Kumar and Co.

VIKRAM SINGH MANHAS

OMKAR SHARMA AND CO

Walia trading co