ARMO of Electrical installations at FSD Hanumangarh

Amount

Supply of the following XLPE power cable with PVC insulated and PVC Sheathed Armoured alluminiun conductor under ground cable confirming to IS -7098 1.1 KV grade at site of work .etc as req (a) 2x10 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following sizeon wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 2x10 sqmm

Supplying, Installation, testing and commissioning of Outdoor aesthetically designed 45 watt LED Street Light Luminare with single piece die cast aluminium housing, for top open for easy maintenance, complete with IP66 protection Class suitable for pole/ bracket mounting . Provided with high quality driver for protection against mis wiring, over voltage, surg protection and high and low Voltage

Supplying and fixing of out door type loop in loop out cable junction box fabricated from 1.6 mm MS sheet /polycarbonate material of size 155*210*92 mm enclosed wheather proof, dust proof, water proof and locking arrangement internally embedded gasket with bottom cable entry plat through cable glands fixed with clamps on steel structure and wall. Seperate for incoming and out going cables and wires duly fitted with following in it. HD Connector for 10 to 16 sqmm - 4 Nos 6 amp SP 'C' curve 10 KA MCB - 1 No. fixing Clamps - 2 Nos.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying of metalic box type batten luminar fixture suitable for 20 watt LED of retrofit tube complete with provision for fixing suspended by two number conduit down rod or on surface of wall/truss/purlin with side conduit entry facility for wire connection.

Supplying of 20 watt LED of retrofit polycarbonate body double side connection type tube suitable to mount on and metalic box type batten fixture

Supplying of 1200mm sweep capacitor type AC. Ceiling Fan complete with 30 cm. down rod with hanging shackle blade and canopy suitable for 230/240 volts ,50HZ, single phase confirming to ISS/374/1966 as amended from time to time etc as reqd.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 150 mm X 75 mm X 60 mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 4.5 metre and upto 6.5 metre

Supply,installation, testing & commissioning of feeder piller cable junction box OPAQUE LID type made of thermoplastic, poly carbonate enclosure weather proof, dust proof, water proof and shock proof internally embedded gasket with cable entry through IP-65 thromo plastic cable glands. Seperate for incoming and outgoing cable and wie. The box should be fixed with G.I.clamps size 25x5 mm & G.I.nuts & bolts at the suitable height on exisintpole. Feeder piller is comprised of the following components. Material 1. Feeder piller cable junction box IP-66 size 300x300x170 mm - 1 No 2.Terminal Set 25 Sq mm 5 pole- 1 Set 3. Angle iron stand size 25x25x5 mm with leg of 600 mm with Nut ,bolt,cement and the sand etc- 4. 63A 4 pole isolator

pawan trading co.

B. L ELECTRICALS

Ms SINGADIA ENTERPRISES