Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-Finance NAGLA UDHA NEAR PRIMARY SCHOOL POST DHANOLI AGRA UP AGRA 282010 | AGRA | AGRA | UP | 282010 | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹59.9 L+₹13.6 L (29.4%)Rejected-Finance NAGLA NANDA DHANAULI JAGNER ROAD AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹60.9 L+₹14.6 L (31.5%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹62.0 L+₹15.7 L (33.8%)Rejected-Finance 29 7 KACHERI ROAD NEAR DISTRICT HOSPITAL PRATAPGARH PRATAPGARH UTTAR PRADESH 230001 | PRATAPGARH | UTTAR PRADESH | 230001 | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹64.6 L+₹18.3 L (39.6%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L5 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | deva engineers L5 | durgey traders L6 | BUILDTECH ASSOCIATES L3 | MUKTA AND COMPANY L1 | M/S SINGH ELECTRIC CO L4 | M/S Arti Constructions L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 60 to 75HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as directed. | 1 | Each Job | 45,990 ₹45,990 | 45,990 ₹45,990 | 46,000 ₹46,000 | 36,500 ₹36,500 Lowest | 46,000 ₹46,000 | 45,000 ₹45,000 |
| 2.00 | Taking out centrifugal pump set connected with 60 to 75 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceable centrifugal pump set for making it serviceable by repair/ replacement of the following items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completion complete all as directed:-
Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only. | 1 | Each Job | 4,500 ₹4,500 | 4,500 ₹4,500 | 4,500 ₹4,500 | 3,580 ₹3,580 | 4,550 ₹4,550 | 2,500 ₹2,500 Lowest |
| 2.01 | Ball bearing suitable for 60 to 75 HP centrifugal pump set complete all as directed. Make:- SKF/ NBC/ Tata as approved. | 2 | Each | 4,480 ₹8,960 | 4,480 ₹8,960 | 4,600 ₹9,200 | 3,450 ₹6,900 | 4,300 ₹8,600 | 2,800 ₹5,600 Lowest |
| 2.02 | SS pump shaft 50mm dia with neckring as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 4,700 ₹4,700 | 4,700 ₹4,700 | 4,700 ₹4,700 | 3,150 ₹3,150 Lowest | 4,450 ₹4,450 | 4,700 ₹4,700 |
| 2.03 | Rubber coupling with all fixing accessories as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 1,600 ₹1,600 | 1,600 ₹1,600 | 1,600 ₹1,600 | 1,030 ₹1,030 Lowest | 1,540 ₹1,540 | 1,650 ₹1,650 |
| 2.04 | MS coupling with all fixing accessories as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 3,850 ₹3,850 | 3,850 ₹3,850 | 2,850 ₹2,850 Lowest | 2,960 ₹2,960 | 3,800 ₹3,800 | 4,000 ₹4,000 |
| 2.05 | Gland plate with nuts, bolts and washers as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 1,500 ₹1,500 | 1,500 ₹1,500 | 1,500 ₹1,500 | 980 ₹980 | 1,450 ₹1,450 | 800 ₹800 Lowest |
| 2.06 | Cast iron impeller as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 3,900 ₹3,900 | 3,900 ₹3,900 | 3,900 ₹3,900 | 8,340 ₹8,340 | 3,850 ₹3,850 | 450 ₹450 Lowest |
| 2.07 | Stainless steel sleeves as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | 1,400 ₹1,400 | 1,400 ₹1,400 | 1,400 ₹1,400 | 1,280 ₹1,280 Lowest | 1,300 ₹1,300 | 3,000 ₹3,000 |
| 3.00 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 40HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as directed. | 1 | Each Job | 35,000 ₹35,000 | 35,000 ₹35,000 | 35,000 ₹35,000 | 26,600 ₹26,600 Lowest | 34,000 ₹34,000 | 38,000 ₹38,000 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
14 Aug 2026, 6:00 pmClosed
GE TECH AREA AGRA
Military Engineers Services Garrison Engineer (AF) Tech Area Agra - 282008
REPAIR/MAINT TO CHLORONOME PLANT, PUMP SETS AND BOREWELLS AND REPAIR AT WATER SUPPLY INSTALLATION AT AF STN AGRA UNDER GE (AF) TECH AREA AGRA
2026_MES_778909_1
8200-1842/E8
Open Tender
Civil Works
Item Rate
270 days
AF TECH ATREA AGRA
Class D and above category a (ii)
8 documents required · 8 mandatory
₹500
Yes
GE TECH AREA AGRA
₹96,000
Yes
25 Sept 2026
16 Jul 2026
19 Aug 2026
16 Jul 2026
14 Aug 2026
30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 60 to 75HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as directed. | 1 | Each Job | - | - |
| 2 | Taking out centrifugal pump set connected with 60 to 75 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceable centrifugal pump set for making it serviceable by repair/ replacement of the following items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completion complete all as directed:-
Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only. | 1 | Each Job | - | - |
| 2.01 | Ball bearing suitable for 60 to 75 HP centrifugal pump set complete all as directed. Make:- SKF/ NBC/ Tata as approved. | 2 | Each | - | - |
| 2.02 | SS pump shaft 50mm dia with neckring as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 2.03 | Rubber coupling with all fixing accessories as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 2.04 | MS coupling with all fixing accessories as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 2.05 | Gland plate with nuts, bolts and washers as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 2.06 | Cast iron impeller as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 2.07 | Stainless steel sleeves as per existing suitable for 60 to 75 HP centrifugal pump set complete all as directed. | 1 | Each | - | - |
| 3 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 40HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as directed. | 1 | Each Job | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.49 MB
1842tender.pdf
Tender Documents • 1.45 MB
BOQ_872415.xls
BOQ • 2.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .