SPECIAL REPAIR TO BLDG NO P-15 OR ACCN AT JALAPAHAR UNDER AGE(I) DARJEELING

Amount

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L Hardcore of Broken bricks gauge n exc.63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 as in hold fast blocks complete all as specified and directed .

Supply only WPC (best quality) of approved make complete all as specified and as directed.

Labour only for cutting chases pining in for concealed water tubing and making good cutting n exc 10cm girth all as specified and as directed.

M&L 2nd class hard wood clean sawn in scantlings etc. complete all as specified and directed .

S&F 25 mm thick 2nd class hardwood weather boarding planed one side with butt joints as in roof roof , ceilings , partitions ,facia , barge etc complete all as direcrted and specified.

S&F 35mm thick, 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or veneered particle board medium density, wood particle board with commercial face veneers : supplied and fitted to chowkhats all as specified and directed complete.

Taking down chowkats or frame exc 1.5 sqm but n exc.4 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site all as specified and directed complete.

Taking down shutter n exc 1 sqm all as specified and remooving from site all as specified and directed complete.

Taking down shutter exc 1 sqm but n exc.2 sqm all as specified and remooving from site all as specified and directed complete.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and directed .

S&F 125mm long aluminium anodised tower bolt of extruded section complete all as specified and directed .

S&F 300mm long aluminium anodised sliding bolt of extruded section complete all as specified and directed .

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed .

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed .

S&F 125mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed .

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed .

S&F in repairs curtain rails of mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and as directed.

S&F galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks on galvanised wire staples complete all as specified and directed .

M&L MS flat wind ties for roof including securing bolts cutting tops to shape as directed drilling holes including all necessary drilling,bolting or riveting,etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

S&F clamps,hold fast,hook. Washer & similar small articles confirming to Fe-290 Gde-e-165 complete all as specified and directed .

S&F anodised aluminium snap grid frame work of size 605x605 for false ceiling complete all as specified and as directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks complete all as specified and directed .

M&L Non Asbestos fibre plain building boards 4mm thick, fixed to timber/Aluminium/steel etc framework with screws complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

M & L granite (of any type) tiles 20mm thick machine cut, bedded and jointed withgrey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed .

M&L PCC 1:3:6 , 75mm thick type C2(using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed .

M&L 100 mm thick Cement concrete type D- 2,1:4:8 (40mm) graded aggregate complete all as specified and as directed.

M&L for providing glazed ceramic coloured tiles of size not less than 300x450 mm (7 to 8mm thick) as in vetical surface set in cement slurry jointed & pointed in white or coloured cement to match the surface of tile complete all as specified and as directed.

M&L for providing non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.06 but not exc. 0.11 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile complete all as specified and as directed..

M&L for providing non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.11 but not exc. 0.18 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile complete all as specified and as directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.

M&L for rendering 10mm thick on stone masonary surface or surface other than fair face of brickwork in cement mortar 1:3 complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for preparation of new painted surface applying two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm girth complete all as specified and directed .

M & L preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with one coat of creosote oil on wooden surfaces complete all as specified and directed .

M&L preparing surface of wood or wood based materials steel and iron work , new or old ,treating ends of post,back of chowkhat etc.area tarred exc 0.1 sqm but n exc 0.5 sqm each at any description and girth, not other wise described, and treated with tar or coal tar black paint complete all as specified and directed .

S&F galvanised tubes conforming to IS 1239 medium grade 15mm dia with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

S&F galvanised tubes conforming to IS 1239 medium grade 20mm dia with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection , including cleaning , for refixing or removal complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connection , including cleaning , for refixing or removal all as specified and as directed.

Dismantling 1000 ltr water tank and removing to store all as specified and as directed.

S&F Pillar tap fancy type cast coppert alloy with capstan heads chroumium plated screwed down high pressure with or without lettered Hot or Cold wityh long screwed shanks and fly nuts screwd for union pipe 15mm complete all as specified and as directed.

S&F in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for pipe and fixed. ,fancy type, cast copper alloy screwed down for iron pipe or for brass ferrule complete all as specified and directed .

S&F in repairs stop valves, 15mm dia chromium plated ,fancy tpye,cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20 mm -210 gms ) all as specified and directed complete.

S&F CP/PVC connection pipe 15mm size 450mm long complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joints complete all as specified and directed .

S&F PVC (SWR) bends 110mm bore (any radious ) complete all as specified and directed .

S&F in repairs 100mm CI (SWR) floor trap,plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed..

S&F sinks in repair with drainage board made of stainless steel not less than 1mm thick kitchen or laboratory with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union o pipe overall size not less than 915mm x 460mm and bowl size not less than 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair wash basin vitreous china, flat back size 550x400mm complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed .

Dismantling timber scantling 40 Sq cm & over in section in any position(unframed work)complete all as specified and as directed .

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wall and ceiling board any thicknes including cover fillets complete all as specified and as directed.

M&L PCC (1:3:6) type C2 (40 mm graded aggregate ) in surface chanel and drain complete all as specified and directed .

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds , mitred / stopped ends complete all as specified and directed . (Note:- Add or deduct for each 25 mm girth or part thereof over or under 30cm shall be considered in MB at time of measurements taken ay site).

M&L for brickwork with subclass flyash brick, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid straight chowkats and frames , wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed complete.

M&L factory made 35mm thick 2nd class hardwood glazed and skeleton door shutter open rebated and prepared to receive glass edges of frames plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. complete all as specified and directed .

S&F factory made 30mm thick 2nd class hardwood glazed and skeleton window shutter open rebated and prepared to received glass gauge with sash bars edge of framing plain chamfered or round , fitted with cut and mitred bends for securing glass gauge etc but devided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers provided with styles and rails etc size of member of shutters as specified in SSR part-I sec-VIII clause 8.24 ( b) fitted to chowkats complete all as specified and directed .

Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site all as specified and directed complete.

M&L for rendering 15 mm thick on brick masonry walls other than fair faces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick masonry wall surface in CM 1:4 (with WPC), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening on walls complete all as specified and as directed.

M&L for complete removal of existing treatment on old surfaces of walls and applying two coats of OBD on walls complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank capacity 1000 ltr cylindrical vertical (double layers) conforming to IS-12701 with closed top cover ,fixed in position all as specified and directed complete.

S&F in repairs 15mm bib tap chromium plated ,fancy type, cast copper alloy screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in Repairs Vitreous china squatting pan, "Orrisa Pattern" size 580x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level colour with inlet ball, float and handle including brackets complete all as specified and as directed.

S & F PVC down pipe for kitchen sink as per site required(not less than 40mm)complete complete all as directed.

S&F 100mm Butt hinges, medium weight, cold rolled Stainless steel, and fixed complete all as specified and directed .

S&F PVC waste pipe 32mm dia suitable length for wash basin complete all as specified and as directed. .

M&L for preparation of new plastered surface of wall & applying two coats of exterior weather coat paint over a coat of cement primer complete all as specified and as directed.

M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of exterior weather coat over a coat of cement primer complete all as specified and as directed.

S&F in repairs PVC (SWR) half round gutteres drain pipe 180mm bore complete all as specified

S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete all as specified and directed .

S&F 180mm PVC (SWR) pipe clamp as in gutter drain pipe complete all as specified

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete fittings such as switches,ceiling roses, pendents, regulators, sockets,tube light fittings etc, removing materials from site and making good disturbed surface of walls & floors etc.

M&L for Point wiring with PVC un-sheathed 1100 volts and PVC insulated FRLS cable with multi - stranded copper conductor cable 1.5 Sq mm size in and including PVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated FRLS copper cable for continuous earth wire connected to earth dolly for one light point controlled by one 5 Amp switch one way complete all as specified and directed .

M & L for Point wiring complete 1.5 Sqmm, single core, PVC insulated FRLS, unsheathed, 1100 Volts grade copper multistranded conductor drawn through in and including PVC casing caping in walls/roofs including PVC insulated FRLS copper earth continuity conductor 1.5 Sqmm cable (green) connected to common earth dolly including pressed steel terminal boxes 60 mm deep concealed in walls with laminated sheet top cover 3 mm thick for housing the switches, sockets, regulators etc. for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size One 5A 2pin/3pin socket out let multipurpose on the same board with other switches complete all as specified and directed .

M & L for Point wiring complete 1.5 Sqmm, single core, PVC insulated FRLS, unsheathed, 1100 Volts grade copper multistranded conductor drawn through in and including PVC casing caping in walls/roofs including PVC insulated FRLS copper earth continuity conductor 1.5 Sqmm cable (green) connected to common earth dolly including pressed steel terminal boxes 60 mm deep concealed in walls with laminated sheet top cover 3 mm thick for housing the switches, sockets, regulators etc. for one 3 pin socket outlet, 5Amps, independent, with cables 1.5 sq. mm size 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on Independent Board complete all as specified and directed .

M&L for Point wiring with PVC un-sheathed 1100 Volts and PVC insulated FRLS cable with stranded copper conductor cable 2.5 Sq mm size in and including PVC casing caping of required width including one No. 2.5 Sq mm single core PVC insulated FRLS copper cable for continuous earth wire connected to earth dolly for one 6 Pin, 15 Amp socket out let on the independent board complete all as specified and directed .

M&L for Point wiring with PVC un-sheathed 1100Volt and PVC insulated FRLS cable with stranded copper conductor cable 4.0 Sq mm size in and including PVC casing caping of required width including one No. 4 Sq mm single core PVC insulated FRLS copper cable for continuous earth wire connected to earth dolly for one metal clad enclosure for geyser out let on the independent board complete all as specified and directed .

S & F in repair Lamp Holder , PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S & F in repair Switch Piano flush button single pole one way 5 Amp, 240 volt complete all as specified and directed .

S & F in repair Bell Push Flush type 5 Amp, 240 volt complete all as specified and directed .

S & F in repair Bell Ding-Dong AC 230 V Single Pole complete as dircted.

M & L for Modular Socket 16 Amp 6A - 2/3 pin 2 Module type universal, 240 volts, complete as directed.

S & F in repair Socket outlet 3 pin, 5A, flush type 240 volt complete all as specified and directed .

S & F in repair Switch combination outlet 3 Pin, 5 Amp flush type, 240 volts, complete all as specified and directed .

S & F in repair Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and directed .

S & F in repairs of sheet metal enclosure MCB DB,SPN ,8ways 240 Volts with rated busbar ,double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/single pole complete all as specified and directed.

S & F in repairs of sheet metal enclosure MCB DB,SPN ,4ways 240 Volts with rated busbar ,double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/single pole complete all as specified and directed.

S & F in repairs of sheet metal enclosure MCB DB,TPN ,4ways 415 Volts with rated busbar ,double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/single pole complete all as specified and directed.

S & F in repair for Ceiling rose, 3 Phase/PVC/polycarbonate, isolated body, 3 terminals and 240 Volts complete all as specified as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete.

Material and labour Sub main wiring with PVC un-sheathed and PVC insulated FRLS cable with multi stranded copper conductor cable 2 x 2.5 Sq mm size in and including PVC casing caping of required width including 1x2.5 sq. mm single core PVC insulated FRLS copper cable for continuous earth wire all as specified.

Material and labour Sub main wiring with PVC un-sheathed and PVC insulated FRLS cable with multi stranded copper conductor cable 2 x 6 Sq mm size in and including PVC casing caping of required width including 1x6.0 sq. mm single core PVC insulated FRLS copper cable for continuous earth wire all as specified.

Material and labour Sub main wiring with PVC un-sheathed and PVC insulated FRLS cable with multi stranded copper conductor cable 4 x 6 Sq mm size in and including PVC casing caping of required width including 1x4.0 sq. mm single core PVC insulated FRLS copper cable for continuous earth wire all as specified.

Taking down DB's including MCB's etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces complete all as specified and directed .

S&F in repair Batten for LED tube light fitting suitable for not less than 2' feet . complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and PVC square blocks for fixing LED Fitting all as directed .

S&F in repair LED Tube Rod not less than 1 x 8W 2feet, 230V complete all as directed .

M & L for modular power starter unit 2 module 16 Amp, 240 volt complete all as directed .

S & F plastic Surface boxes Modular type 1 & 2 module complete as directed.

S&F in repair cool day light LED bulb not less than 09 watts complete all as directed.

S & F in repair wall mounted batten for LED Tube light fitting not less than 20 Watts including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new PVC round blocks complete all as directed.

S & F LED Tube light not less than 20Watts complete all as directed.

S&F in repair Polycarbonate LED Bulk head fitting not less than 10 watt complete all as directed .

S&F in repair LED Building Security light fitting and street lighting not less than 30 watt complete all as directed .

S&F in repair GI light grade pipe 1.5 m long bend to 45 degree and of diameter 25 mm suitable to building security light power cord pipe diameter with necessary clamps of for fixing building security light all as specified and directed including making hole to wall if necessary complete all as directed .

Supply & fix exhaust fans AC single phase 230/240V of size 300mm sweep with louver complete all as directed .

Supply and Fixing Water heater storage type, electric, capacity 25 Ltr, BEE 5 Star rated complete all as directed .

S & F in repair MCCB ,100 Amp, 4 Pole breaking capacity 16KA, 415 Volt, 50 Hz with sheet metal enclosure complete all as specified and directed .

S & F in repair Four pole MCB 63 amps 415 V breaking capacity 10KA complete all directed .

S & F in repair MCB Single Pole & Neutral C Curve 240 volts of capacity 6- 32 Amp 10 KA complete all as directed .

S & F in repair MCB Single Pole of cap 6-32 Amp, C Curve 240 volts, 10 kA ISI marked as per IS/IEC 60898-1 2002 Integrated label holder ,sliding bottom clamp,Efficient air channels,Color coded On/Off indication on dolly ,Biconnect lower terminals ,IP 20 protected terminals Sliding shutters ,Compatible with signal and control Auxiliaries DC-80 V per pole - 1 kA complete all as directed .

Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected.

Damdoo Bhutia

M/S TSHERING BHUTIA

HIRA SINGH

KWOK YING CHIU

Darjeeling Enterprises

JALAPAHAR HARDWARE

BIMAL BHATTRAI