DAY TO DAY MAINT AND CERTAIN REPAIRS TO BLDGS AT INS ANGRE, PCDA,HQMNA , INS AGNIBAHU,MET BSQ, MOC,COMNETCEN,NPO,INDIA,JOC AND PERIODICAL SERVICES AT NAVAL DOCKYARD UNDER AGE B R-II GE (NW) KUNJALI

Amount

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all specified and directed by Engineer-in-charge.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all specified and directed by Engineer-in-charge.

Taking down shutters of any description not exc 1 sqm each complete all specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all specified and directed by Engineer-in-charge.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified complete all specified and directed by Engineer-in-charge.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all specified and directed by Engineer-in-charge.

S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all specified and directed by Engineer-in-charge.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all specified and directed by Engineer-in-charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all specified and directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all specified and directed by Engineer-in-charge.

Supply & fixing in repairs powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 50 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

Supply & fixing in repairs powder coated aluminium sections for shutters of doors, windows & ventilators and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 50 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

Supply & fixing in repair Anodised aluminium grill transparent or dyed to required shade according to IS :1868 with minimum grade of coating AC 15 of approved design/pattern , with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws with 200 mm C/C, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of Engineer-in-charge.

S&F 3mm thick sheet glass frosted or obscured on one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all specified and directed by Engineer-in-charge.

S&F in repairs solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer complete all as specified complete all specified and directed by Engineer-in-charge.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all specified and directed by Engineer-in-charge.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all specified and directed by Engineer-in-charge.

S&F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F in repair aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all specified and directed by Engineer-in-charge.

S&F in repair aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all specified and directed by Engineer-in-charge.

S&F in repair 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified complete all specified and directed by Engineer-in-charge.

S&F 125mm long Butt hinges,med weight, cold rolled mild steel, and fixed complete all specified and directed by Engineer-in-charge.

S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified complete all specified and directed by Engineer-in-charge.

S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified complete all specified and directed by Engineer-in-charge.

S&F in repair Aluminiuma extruded body, door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F in repairs mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete all specified and directed by Engineer-in-charge.

S&F in repair 20/25mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.type designe and pattern approved by GE, brackets both ends complete all specified and directed by Engineer-in-charge.

Resecuring or easing & adjusting without taking down of shutter of any description n exc 1 sqm each complete all specified and directed by Engineer-in-charge.

Resecuring or easing & adjusting without taking down of shutter of any description exc 1 sqm but n exc 2 Sqm each complete all specified and directed by Engineer-in-charge.

Resecuring or easing & adjusting of existing aluminum doors / windows of any description of any size complete all specified and directed by Engineer-in-charge.

Material & Labour for repairs to steel windows/doors by using welding machine where necessary with thicknesss of weld exceeding 6mm but not 9mm complete all specified and directed by Engineer-in-charge.

S & F in repair Roller venetian blinds type made out of standard cloth of approved texture with necessary accessories etc complete all specified and directed by Engineer-in-charge.

S&F 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all specified and directed by Engineer-in-charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all specified and directed by Engineer-in-charge.

S&F Anodised aluminium snap grid size of 605x605mm frame work for false ceiling complete all specified and directed by Engineer-in-charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all specified and directed by Engineer-in-charge.

M&L for false ceiling made out of 600x600x 4mm thick non asbestos fiber cement designer/coloured fixed in ceiliing flat or slope board complete all specified and directed by Engineer-in-charge.

M&L for POP false ceiling using 600X900x12mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C,complete all specified and directed by Engineer-in-charge.

Taking down wall panelling and similar work and removing to or from store complete all specified and directed by Engineer-in-charge.

S&F 3mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/ rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be approved by Engr-in-charge)

S & F 4mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and as directed complete all specified and directed by Engineer-in-charge.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing complete all specified and directed by Engineer-in-charge.

S&F PVC wall /ceiling paneling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all specified and directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with nails complete all specified and directed by Engineer-in-charge.

S&F 9mm thick prelaminated medium density particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed complete all specified and directed by Engineer-in-charge.

S&F 12mm thick prelaminated medium density particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all specified and directed by Engineer-in-charge.

M&L 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all specified and directed by Engineer-in-charge.

M&L 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all specified and directed by Engineer-in-charge.

M&L 0.9mm thick decorative texture finish laminate type 1, of surface finish colour and pattern as approved fixed with adhesive as per makers instructioncomplete all specified and directed by Engineer-in-charge.

M&L for 12mm thick mairne ply wood suitable for modular kitchen cupboards, drawers, partitions etc of approved colour complete all specified and directed by Engineer-in-charge.

M&L for 18 mm thick marine ply wood suitable for cupboards, drawers, partition etc of approved colour complete all specified and directed by Engineer-in-charge.

S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive complete all specified and directed by Engineer-in-charge.

S&F 2mm thick Linoleum, plain coloured laid in floors incliding streching, cutting, fitting incl seales down with an approved adhesive all as specified complete all specified and directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all specified and directed by Engineer-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all specified and directed by Engineer-in-charge.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all specified and directed by Engineer-in-charge.

M&L rendering 15mm thick in CM 1:6 on brick surfaces, fair finished on walls complete all specified and directed by Engineer-in-charge.

M&L rendering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & fair without using extra cement in ceiling complete all specified and directed by Engineer-in-charge.

M&L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions complete all specified and directed by Engineer-in-charge. (Water proofing compound to be measured and paid for separately).

M&L for applying 4mm thick finished texture mortar in CM 1:2 (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading) incl texture finish shall be achieved with the help of hand driven machine incld preparation of old painted surface & newly plastered surfaces and making plain surface of stone masonary pattern incld irrection & dismantling of scaffolding to carrying out works upto triple stories Bldg complete all as per manufactures instructions.

Supply only integral water proofing compound complete all as specified.

M&L for applying 1 to 2 mm thick wall care putty for making the surface even & smooth complete all specified and directed by Engineer-in-charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all specified and directed by Engineer-in-charge.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded stone agg) as in sub base complete all specified and directed by Engineer-in-charge.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all specified and directed by Engineer-in-charge.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer-in-charge.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer-in-charge.

M&L for coloured glazed ceramic tiles 450x300x7-8 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer-in-charge.

M&L light shade double charged virified ceramic tiles 9- 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer-in-charge.

M&L light shade double charged vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer-in-charge.

M&L 20mm thick mirror polished Granite (of any type) work as in steps, jambs, pillars, cooking platforms, working table and like over 15 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all specified and directed by Engineer-in-charge.

M &L for machine cut prepolished kota stone slab flooring 18-20mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl incl 20mm thick screed bed in cement mortar 1:4 complete all specified and directed by Engineer-in-charge.

M &L for machine cut kota stone slab 18-20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15mm thick backing coat in cement mortar 1:3complete all specified and directed by Engineer-in-charge.

M&L for 18 to 20mm thick mirror finished green marble (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like incl 15mm screeed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all specified and directed by Engineer-in-charge.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all specified and directed by Engineer-in-charge.

Grinding and polishing existing floor of any type (Kota stone, mosaic, cuddappa stone etc) complete all specified and directed by Engineer-in-charge.

Material and labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified and directed by the Engr in charge.

Material and Labour for machine pressed cheqered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down old tarfelt complete all specified and directed by Engineer-in-charge.

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc complete all specified and directed by Engineer-in-charge.

M&L for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not F92 less than 150 gms/sqm) land on a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant complete all as specsified and directed by Engineer-in-Charge.

M & L for Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, unctions of pipes and masonry with polymer mixed slurry complete all specified and directed by Engineer-in-charge.

M&L for preparation of old concrete surfaces and applying one coat of bitumen primer (Black magic/equivalent) @1 ltr/sqm suitable for arresting leakage/seepage of rainwater, applying with spray or brush and ensure all the cracks should be sealed properly as per manlufacturer's instruction etc all as specified and directed. Note : Payment will be made only after testing and executed satisfactorily complete all specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and directed by Engineer-in-charge.

S&F mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all specified and directed by Engineer-in-charge.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all specified and directed by Engineer-in-charge.

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all specified and directed by Engineer-in-charge.

&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

S&F pre-painted hot- dip aluminium-zinc alloy metallic coated plain steel sheet, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all specified and directed by Engineer-in-charge.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all specified and directed by Engineer-in-charge.

S & F 15 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc complete all specified and directed by Engineer-in-charge.

S & F 20 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc complete all specified and directed by Engineer-in-charge.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all specified and directed by Engineer-in-charge.

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe /antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all specified and directed by Engineer-in-charge.

S&F in repairs PVC valveless syphonic action type ,flushing cistern 10 Ltr capacity, Low level white, with inlet ball valve ,float and handle including brackets complete all specified and directed by Engineer-in-charge.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all specified and directed by Engineer-in-charge.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all specified and directed by Engineer-in-charge.

S&F in repair counter type wash hand basin (oval shape) vitreous china white including fittings of 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

S&F in repairs vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified.

S&F in repair stainless steel sink with drainage board made out of 1mm thick stainless steel sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to outward wall or incl fixing cantilever brackets and connecting union to pipe of overall size 915 x 460mm and bowl size 410 x 330 x 160mm complete all as specified.

S&F in repairs Stainless steel plate rack of size 36" x 30"x12" including screws and fittings complete all specified and directed by Engineer-in-charge.

S&F in repairs fancy type CP stop/angle cock of 15 mm dia, screwed for iron pipe and fixed as per sample and directed by Engr-in-Charge.

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed complete as directed by Engr-in-Charge.

S&F in repairs fancy type 2 in 1 bib cock 15mm dia, screwed for iron pipe and fixed complete as directed by Engr-in-Charge.

S&F in repairs fancy type push cock 15mm dia for urinal and fixed complete all specified and directed by Engineer-in-charge.

M&L for urinal spreader of PTMT/CP for fixing with 15mm dia pipe (Min wt 60 gms) complete all specified and directed by Engineer-in-charge.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all specified and directed by Engineer-in-charge.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all specified and directed by Engineer-in-charge.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all specified and directed by Engineer-in-charge.

S&F 450mm PVC connections 15 mm size with PTMT nuts complete all specified and directed by Engineer-in-charge.

S&F 600mm PVC connections 15 mm size with PTMT nuts complete all specified and directed by Engineer-in-charge.

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all specified and directed by Engineer-in-charge.

S & F in repairs PVC waste pipe of required length suitable for wash hand basin, sink and urinal etc complete all specified and directed by Engineer-in-charge.

S & F in repairs Stainless steel soap dish holder fixed with suitable SS screw as per sample and complete all specified and directed by Engineer-in-charge.

S&F in repairs corner glass shelf incl bracket fixed with suitable screw as per sample and complete all specified and directed by Engineer-in-charge.

S&F in repairs CP towel rail 600 mm long with round flange complete all specified and directed by Engineer-in-charge.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs complete all specified and directed by Engineer-in-charge.

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs complete all specified and directed by Engineer-in-charge.

S&F rotational moulded polythylene water storage loft tank of 300ltr capacity hoisted including 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210grms ) all as specified in SSR Part I complete all specified and directed by Engineer-in-charge.

S&F 1000Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210grms ) complete all as specified in SSR Pt-I

S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minium weight 142 gms) complete all specified and directed by Engineer-in-charge.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) complete all specified and directed by Engineer-in-charge.

M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps/shower/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc 10 Ltr capacity

Supply & Fixing in repairs of 15mm dia GI fittings medium ISI marked with new fittings like Elbow, socket, nipple, union , tee etc complete all as directed at site.

Supply & Fixing in repairs of 20mm dia GI fittings medium ISI marked with new fittings like Elbow, socket, nipple, union , tee etc complete all as directed at site.

S&F PVC modular section 20mm thick in profile including aluminium 'C' channels all around the profile suitable for base of loft tank complete all specified and directed by Engineer-in-charge.

S& F in repairs 125 mm dia stainless steel grating fixed in position complete all specified and directed by Engineer-in-charge.

S&F in repairs 150 mm dia stainless steel grating fixed in position complete all specified and directed by Engineer-in-charge.

Supply & Fixing in repairs of good quality PVC syphon kit including float set for low level flushing cistern 0f 10ltrs capacity complete all specified and directed by Engineer-in-charge.

Checking and attending to water leakage from taps or WCs or flushing cistern or or urinals or wash basins or bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, white cement, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If any item if fitting is not serviceable the item will be replaced and the material will be measured and paid at supply only rates) complete all specified and directed by Engineer-in-charge.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100mm dia pipe complete all specified and directed by Engineer-in-charge.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 75/80mm dia pipe complete all specified and directed by Engineer-in-charge.

Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 75 mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 75 mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

S & F PVC (SWR) bends 110 mm complete all specified and directed by Engineer-in-charge.

S & F PVC (SWR) bends 75 mm complete all specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends 110 mm dia any radius provided with access door complete all specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends 75 mm dia any radius provided with access door complete all specified and directed by Engineer-in-charge.

S&F in repairs PVC (SWR) floor trap 75 mm dia., plain with grating including jointing with solvent cement complete all specified and directed by Engineer-in-charge.

S&F PVC vent cowl 110mm dia complete all specified and directed by Engineer-in-charge.

S&F PVC vent cowl 75mm dia complete all specified and directed by Engineer-in-charge.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and joints are in cement or rubber gasket of 150/160mm dia pipe complete all specified and directed by Engineer-in-charge.

Supply & Fixing in repairs 160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all specified and directed by Engineer-in-charge.

S&F 160mm dia bore PVC (SWR) bends including fixing with cement/ rubber ring etc complete all specified and directed by Engineer-in-charge.

M &L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over newly plastered/ putty surfaces of wall over a coat of alkali resistant primer complete all specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper over a coat of alkali resistant primer complete all specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including necessary scaffolding for high raise bldg complete all specified and directed by Engineer-in-charge.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all specified and directed by Engineer-in-charge.

M&L for complete removal of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs (upto G+10) etc complete all specified and directed by Engineer-in-charge.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all specified and directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc complete all specified and directed by Engineer-in-charge.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs complete all specified and directed by Engineer-in-charge.

M&L preparation of paved/chequred floor area and applying one coat floor paint complete all specified and directed by Engineer-in-charge.

Cutting out & removal of plants, roots, shurbs etc from the roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall with brick works in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash cement base paint etc over 15mm thick rendering in CM 1:4 including disposal of demolished material/ waste out of M D land of high rise bldgs/walls complete all specified and directed by Engineer-in-charge.

M&L for gently cleaning the surface of the stone masonary/ stone chips and piers with specialized eater misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misiting and PH balanced surfactants and cleaning inclucluding white pointing or fininshes similar type as the adjcent wall surface complete all as specified and as directed Note : Quoted rate shall be inclusive of removing vegetation on wall surfaces complete all specified and directed by Engineer-in-charge.

Removing any kind of debris including loading in truck (more than 3 Ton) and conveying day to day basis to approved dumping point i.e @ urban / industry loading spreading etc. complete with all leads and lifts (lead 50km) complete all specified and directed by Engineer-in-charge.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening complete all specified and directed by Engineer-in-charge.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening complete all specified and directed by Engineer-in-charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Resecuring and refixing in same opening without taking down of chowkats or frames with shutter (Without taking off from frame) but n.exc 1.5 sqm complete all as specified and as directed by EIC.

Resecuring and refixing in same opening without chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each but (without taking off shutter from the frame) complete all as specified and as directed by EIC.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze complete all as specified and as directed

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed .

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening as per specifiecation and drawings complete all as specified and as directed .

S&F 30 mm thick Rajshri brand factory or equivalant made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

S & F in repairs white glazed earthen ware vitreous Oval type china wash hand basin of size 550x400 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed by Engr-in-Charge.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repairs single piece WC with UF Soft close slim seat cover fixing accessories, accessories set and cistern fitting incl trap/connecting piece complete all as specified and directed by Engr-in-Charge.

S & F in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece complete all as specified and directed by Engr-in-Charge.

S & F in repairs single piece slim concealed cistern with wall mounting frame, installed kit and S-type drain pipe connection set for wall hung WC including accessories set a complete all as specified and directed by Engr-in-Charge.

S&F in repairs towel ring square with round flange complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge.

S & F in repair for urinal pot with sensor Size 370x390x610mm Star white(Senso Art) complete all as specified and directed by Engr-in-Charge.

S & F in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system complete all as specified and directed by Engr-in-Charge.

S&F 600 mm glass self assembly fency type with CP frame fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

M&L 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end complete all as specified and as directed by Engr-in-Charge.

S&F PVC waste Flexible pipe 32mm dia 800mm long with socket sutable for WHB/Sink/urinal complete all as specified and directed by Engr-in-Charge.

S&F in repairs 75mm dia of out let cast iron floor trap with grating including jointing to waste pipe in cement concrete tybe B-1 (1:2:4). complete all as specified and as directed by Engr-in-Charge.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge..

M&L in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, complete all as specified and directed by Engr-in-Charge.

S&F in repairs15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as complete all as specified and as directed by Engr-in-Charge.

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches using pipes of dia:-

75mm dia

100mm dia

Material & Labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).

Complete removal of existing treatment of walls and applying two two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed.

M & L for complete removal of existing treatment in ceiling surfaces and applying one coats of oil bound distemper over a coat of 1 to 2 mm thick wall care putty complete all as specified and directed.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+8 storey bldg complete all as specified and directed by Engr-in-Charge.

M &L for teatment of old walls and applying one coat of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying One coats of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparatiomn of surfaces complete all as specified and directed.

M&L for New plastering wall preparation and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparatiomn of surfaces complete all as specified and directed.

M & L for preparing old treated surface applying one coat of varnishing over a coat of woodfiller transparant. Complete all as specified and directed by Engr-in-Charge.

S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 630x450 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed by Engr-in-Charge.

S&F under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.

S & F in repair extruded Brass handles fabricated type 125 mm size complete all as specified and as directed by Engr-in-Charge. .

S & F in repairs extruded Brass handles fabricated type 150 mm size complete all as specified and as directed by Engr-in-Charge. .

S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. Complete all as specified and as directed by Engr-in-Charge.

S&F in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type c-21 etc complete all as specified and directed by Engr-in-charge.

ditto as per item no-219 but 75 mm in size

S & F 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11

S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F in repair150mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed.

S&F in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed

S&F 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S&F in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Material & Labour for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

Material & Labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cutmachine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.

S & F in repair for acoustical Wall panelling with square edge made of fiber glass substrate 20 to 25 mm thick and wrapped on lthe front side with an acoustical transparent and fire resistant fabric with an option of colour as approved of size 2100 x 600 or 600 x 600mm providing a minimum sound absorption level of 0.50 NRC to be affixed to wall using wall panel impalers (including glass wool as per coverage of soundproof). Panel to be fixed using self tapping screw. Silica based construction adhesive to be dabbed on the projecting elements (spikes) of the impalers all as directed and approved and specified.

S & F in repairs for door lock 7/8 mm inch mortice handle pair in black silver finish with legend 65 Brass dead bolt double action 6 Lever lock. Complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment on steel surfaces and applying a coat epoxy putty/Metal putty 1 to 2mm thick on steel surfaces, preparatory and applying two coats of synthetic enamel paint over a coat of red oxide. Complete all as specified and directed by Engr-in-Charge.

S&F Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. All as specified and directed.

RS Enterprises (BID ID -3498286)

SHRI SAI ENTERPRISES (BID ID -3498704)

ASHOK CONSTRUCTION (BID ID -3505211)

Anil Industrial Corporation (BID ID -3504618)

Nexus Infratech (BID ID -3498144)