CERTAIN RAPAIR AND PAINTING OF STEEL FURNITURE UNDER GE SOUTH PATHANOT

Amount

REPAIR TO TABLE 900 x 600 x 760MM STEEL FRAME WITH DRAWER(FD-1008)

Taking out unserviceable top of table and S & F of new top of size 900mm x 600mm made out of 18mm thick pre-laminated particle board, exterior grade ISI marked, one side with teak shade as approved and balancing white (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood edging all round the top duly varnished, all as specified,shown on drawing and as directed by Engineer-in- Charge.

Taking out broken/damage components i.e. legs,long rail, short rail & stiffner and S & F of new legs,long rail, short rail & stiffner made out of 25mm square MS pipe of 1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion, of approved make of Asian/Berger all as specified and directed by Engineer-in-Charge.

Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixed brass lock 50mm having 4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg. Drawer shall be applying two coats of synthetic enamel OG paint of approved make.

M & L for Welding works wherever required for repair to legs rails & stiffner, drawer of table. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in-Charge.

Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having 4 lever with double keys Make-Harrison /Godrej fixing with suitable nuts, All as shown in drg and as directed by Engineer-in-Charge.

Taking out broken PVC shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel screw. All as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OG paint to old & new portion of approved make of Asian/ Berger all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE 900 x 600 x 760MM STEEL FRAME W/O DRAWER ( FD-1007)

Taking out unserviceable top of table and S & F of New top of size 900mm x 600mm made out of 18mm thick pre-laminated particle board, exterior grade ISI marked one side with teak shade as approved and balancing white (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified, shown on drawing and as directed by Engineer-in- Charge.

M & L for Welding works wherever required for repair to legs rails & stiffner of table. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in-Charge.

Taking out broken PVC shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel screw. All as specified and directed by Engineer-in-Charge.

M&L for preparation of painted surface by rectification, scratching and painting of two coats of synthetic enamel OG paint to old/new portion of approved make of Asian/Berger all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE CLERK STEEL (FD-84(M),FD-381,FD-1004,FD-1006)

Taking out unserviceable top from Table and S&F of New top of size 1220mm x 630mm made out of 18mm thick pre-laminated particle board, exterior grade ISI marked, one side with teak shade as approved and balancing white(Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified,shown on drawing and as directed by Engineer-in- Charge.

Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixed brass lock 50mm having 4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg. Drawer shall be applying two coats of synthetic enamel OG paint of approved make.

Removing of broken/damage components i.e. legs, top front rail, side rail,stiffener and S & F of new leg, top front rail, side rail and stiffener made out of 25mm square MS pipe of 1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having 4 lever with double keys Make-Harrison /Godrej fixing with suitable nuts, All as shown in drg and as directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to legs, rails & stiffner, drawer of table. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in-Charge.

Taking out broken PVC shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel screw. All as specified and directed by Engineer-in-Charge.

M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of approved synthetic enamel paint OG to old & new portion of approved make of Asian/ Berger all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE OFFICER STEEL (FD-84(M) FD-1003)

Taking out of unserviceable top from Table and S & F of new top of size 1680mm x 870mm made out of 18mm thick pre-laminated particle board, exterior grade ISI marked, one side with teak shade as approved and balancing white (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixed brass lock 50mm having 4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg. Drawer shall be applying two coats of synthetic enamel OG paint of approved make.

Taking out broken/damage components i.e. legs, top front rail, top side rail and stiffener and S & F of new leg, top front rail, top side rail and stiffener made out of 25mm square MS pipe of 1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having 4 lever with double keys Make-Harrison /Godrej fixing with suitable nuts, All as shown in drg and as directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to legs rails & stiffner, drawer of table. Welding in repair not exceeding 2.5mm in length complete all as specified & as directed by Engineer-in-Charge.

Taking out broken PVC shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel screw. All as specified and directed by Engineer-in-Charge.

M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of approved synthetic enamel paint OG to old & new portion of approved make of Asian/ Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE DINING ORs (FD-165)

Taking out unserviceable top from Table dining and S & F of new top of size 1900mm x 685mm made out of 19mm thick block board of (Make- Centuryply/ kitply/Archidply/ DURO) duly covered with 22 guage aluminium sheet with 2" over lapping with stainless steel screw. All as specified, shown on drawing and as directed by Engineer-in-Charge.

Removing of broken/damage components i.e. legs, top long rail, short rail, stiffener of Table dining and S & F of new legs, top long rail, short rail, stiffener complete made out of 25mm square MS pipe of 1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to legs rails & stiffner of table. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in-Charge.

Taking out broken PVC shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel Screw. All as specified and directed by Engineer-in-Charge.

M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of synthetic enamel paint black to old & new portion of approved make of Asian/Berger all as specified and directed by Engineer-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL (FD-67, FD-243, FD-1031)

Removing of unserviceable locks from the locking assy by loosening of screws and S & F new MS CP locks 75mm heavy duty having 6 lever with double keys Make-Harrison/ Godrej, fixing with suitable nuts including repair of locking device complete all as specified and as directed by Engineer-in-charge.

Removing of unserviceable door handles from Almirah large and S & F of new door handle of mild steel chromium plated 100mm of approved make complete with nuts & pins all as specified and as directed by Engineer-in-charge.

Removing of broken/damaged shelve from Almirah and S & F of new shelves made out of MS sheet 1 mm thick of exisiting shape & size 900mm x 400mm x 25mm of existing shape & size with suitable clamps, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger,all as specified & directed by Engineer-in-Charge.

Removing of broken/damaged legs from bottom portion of Almirah large steel and S & F of new leg made out of MS Sheet 1mm thick of size 485mm x 70mm x 100mm, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of unserviceable hinges from shutter and S & F of new hinges of mild steel of size 75mm best quality as approved by GE, all as specified and directed by Engineer-in-Charge.

Removing of unserviceable locking device from Almirah Large steel and S & F of new GI locking device 3 way best quality as approved by GE including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified & directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Almirah. Welding in repair not exceeding 2.5mm in length complete all as specified & as directed by Engineer-in- Charge.

M & L for preparation of the existing, decorated surfaces of the almirah large steel with shelves by removing of all dents and spray painting of approved synthetic enamel paint OG to Internal & External complete of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES (FD-67(M) FD-1032)

Removing of unserviceable locks from the locking assy by loosening of screws and S & F new MS CP locks 75mm heavy duty having 6 lever with double keys Make-Harrison/Godrej,fixing with suitable nuts including repair of locking device complete all as specified & as directed by Engr-in-charge.

Removing of unserviceable door handles from Almirah Med steel and S & F of new door handle of mild steel chromium plated 100mm of approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge.

Removing of broken/damaged shelves of Almirah Med steel and S & F of new shelves made out of MS sheet 1mm thick with existing shape & size 760mm x 365mm x 25mm with suitable clamps, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of broken/damaged legs from bottom portion of Almirah Medium steel and S & F of new leg made out of MS Sheet 1mm thick of size 440mm x70mm x 100mm, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of unserviceable hinges from shutter and S & F of new hinges of mild steel of size 75mm best quality as approved by GE, all as specified and directed by Engineer-in-Charge.

Removing of unserviceable locking device from Almirah Med steel and S & F of new GI locking device 3 way best quality as approved by GE including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified & directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Almirah. Welding in repair not exceeding 2.5mm in length complete all as specified & as directed by Engineer-in- Charge.

M & L for preparation of the existing, decorated surfaces of the Almirah Med steel with shelves by removing of all dents and spray painting of approved synthetic enamel paint OG to Internal and External complete all as specified and as directed by Engineer-in-charge.

REPAIR TO CHAIR CB STEEL WITH ARM (FD-75(M)

Removing of broken/damaged seats from chair CB Steel with arms and S & F new seats made of 2nd class hard wood of size 450mm x 410mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge.

Removing of broken/damaged back from chair CB Steel with arms and S & F new back made of 2nd class hard wood of size 450mm x 350mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge.

Taking out broken/damaged hand rest (Arms) from chair CB steel and S & F new hand rest (Arms) made of 2nd class hard wood of size 50mm x 25mm x 410mm long of existing shape & size duly powder coating painted of black colour and fixed with new screws complete all as shown in drawing and as directed.

S&F of 02 Nos MS rod 10mm x 410mm long for extra support for seat of chair CB Steel, including cutting & welding etc and applying two coats of red oxide primer to new portion all as specified and directed by Engineer-in-Charge.

S&F of MS flat iron strips of size 25mm x 75mm x 3mm be welded beneath for seat & back for extra support for chair CB Steel with two coats of synthetic enamel paint OG including welding and preparation of surface as per drg.

M & L for Welding works wherever required for repair to chairs. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in- Charge.

Taking out broken/damaged PVC Cap from chair CB steel with arms and S & F new PVC cap black colour on top side of chair as approved by GE, all as shown in drawing and as directed.

M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OG paint to frame of chair portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO CHAIR CB STEEL WITHOUT ARM (FD-75)

Removing of broken/damaged seats from chair CB Steel without arms and S & F new seats made of 2nd class hard wood of size 425mm x 375mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge.

Removing of broken/damaged back from chair CB Steel without arms and S & F new seats made of 2nd class hard wood of size 375mm x 350mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge.

S&F of MS flat iron strips of size 25mm x 75mm x 3mm be welded beneath for seat & back for extra support for chair CB Steel with two coats of synthetic enamel paint OG including welding and preparation of surface as per drg.

Supply & Fixing of 02 Nos MS rod 10mm x 410mm long for extra support for seat of chair CB Steel, including cutting & welding etc and applying two coats of red oxide primer to new portion all as specified and directed by Engineer-in-Charge.

M&L for Welding works wherever required for repair to chairs. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in- Charge.

Taking out broken/damaged PVC Cap from chair CB steel without arms and S & F new PVC cap black colour on top side of chair as approved by GE, all as shown in drawing and as directed.

M&L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OG paint to frame of chair portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO LOCKER BED SIDE STEEL ( FD-1029)

Removing of unserviceable door handles and S & F new Mild steel chromium plated handles 100mm of approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge.

Removing of unserviceable Hasp & Staple and S & F of new Hasp & Staple of size 100 mm safty type mild steel chromium plated of approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge.

Removing of unserviceable hinges from door and S&F of new hinges of mild steel of size 75mm best quality as approved by GE, all as specified and directed by Engineer-in- Charge.

Removing of broken/damaged legs from bottom portion of locker steel and S & F of new leg made out of MS Sheet 1mm thick of size 575mm x 150mm x 100mm, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed.

M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Locker. Welding in repair not exceeding 2.5mm in length complete all as specified & as directed.

Removing of broken/damaged conduit pipe from locker and S & F of new CP steel conduite pipe of 1.6mm thick x 20mm x 380mm long with socket for hanging of cloth, all as per shown on drg and directed by Engineer-in-Charge.

M & L for preparation of the existing, decorated surfaces of the locker steel with shelves by removing of all dents and filling with putty and spray painting of approved synthetic enamel paint of Internal and External complete of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO CHAIR VARANDAH (FD-256, FD-259)

Taking out old broken/damaged Conduit pipe from front/rear leg, seat and back rail and stiffener and S&F new front/rear leg,seat/back rail and stiffener made out of 20 mm dia conduit pipe of 16 Gauge including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Taking out broken/damaged 10 mm MS rod and S & F with new MS rod 10mm x 460mm long including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

M & L for Welding works wherever required for repair to chairs. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in- Charge.

Removing old worn out cane plastic of chair verandha preparing surfaces by applying and papering and painting the same with two coats of white syn enamel paint, of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Re-canning of chair verandha seat and back with cane plastic 4mm wide half round white colour canned prepared under ser No 13.04 above as per Godrej pattern complete all as specified and as directed by Engineer-in-charge.

Taking out broken/damaged PVC shoes of chair verandah legs and S & F new PVC shoes made out of hard rubber supirior quality as approved by GE and fixed with steel Screw. All as specified and directed by Engineer-in-Charge.

CONVERSION OF CHARPOY GI PIPE NYLON NEWAR (FD-1122/FD-220)TO CHARPOY GI PIPE WITH PLYWOOD TOP COMPRISING OF THE FOLLOWING :- (a) Taking out existing unserviceble Nylon Newar from the Charpoy GI pipe & tightening of frame. (b) Fixing of 03 Nos MS flat iron stiffner of size 900mm x 40mm x 6mm thick, each welded with fillet weld all around 3mm thick to long rails of each GI pipe charpoy at equally spaced (Parallel to short rail) to support plywood and two coats of synthetic enamel paint black over one coat of red oxide zinc chrome primer on stiffner, of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge. (c) Fixing of Plywood BWP grade AA type as per IS-710 of Make-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes. All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. All as specified and directed by Engineer-in-Charge.

REPAIR OF CHARPOY GI PIPE NYLON NEWAR AND CHARPOY GI PIPE PLY TOP(FD-220/FD-1122/FD-220R)

Removing of old broken stiffner of MS square tube 25mm x25mm x 900mm from GI Charpoy plytop and S & F of 03 Nos MS flat iron stiffner of size 900mm x 40mm x 6mm thick, each welded with fillet weld all around 3mm thick to long rails of each GI pipe charpoy at equally spaced (Parallel to short rail) to support plywood and two coats of synthetic enamel paint black over one coat of red oxide zinc chrome primer on stiffner, of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

Removing of unserviceable plywood 12mm thick from charpoy GI pipe ply top and S & F of new Plywood BWP grade AA type as per IS-710 of Make-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes. All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. All as specified and directed by Engineer-in-Charge.

Removing of broken/UNSV Elbow 3 way from charpoy GI pipe and S & F of new GI Elbow 3 way of 32 mm medium grade ISI marked complete all as specified & directed by Engr-in-charge.

Removing of broken/UNSV hexagonal check nut from Charpoy GI pipe and S & F of new GI hexagonal check Nut 32 mm bore, 6 mm thick complete all as specified and directed by Engr-in-charge.

Removing of broken/UNSV long rail of charpoy GI pipe and S & F of new long rails of GI pipe 32 mm x 1880mm “Medium grade” (ISI Marked) threaded both ends as per drg, all as specified & directed by Engr-in-Charge. Make-TATA/JINDAL/ SURYA PRAKASH.

Cutting & fixing of 02 Nos GI short rail 840mm made out of unserviceable long rail retrived from Srl item No 15.05 above including threading both ends and fixing into existing charpoy frame as per drg & taking out unsv short rail,complete all as specified and shown on drawings,all as directed by Engr-in-charge.

Cutting & fixing of GI leg 440mm made out of unserviceable short rail retrived from Srl item No 15.06 above including threading both ends and fixing into existing charpoy frame as per drg and taking out unsv legs, complete all as specified and shown on drawings, all as directed by Engr-in-charge.

Removing of broken/UNSV legs of charpoy GI pipe and S & F of new legs of GI pipe 32 mm x 440mm “Medium grade” (ISI Marked) threaded both ends as per drg, all as specified & directed by Engr-in-Charge. Make-TATA/ JINDAL/ RAVINDRA.

Removing of broken/UNSV GI shoe socket 32 mm and S & F of GI shoe socket 32 mm “Medium grade” (ISI Marked) threaded ends to legs of Charpoy GI Pipe as per drg , all as specified & directed by Engr-in-Charge. Make-TATA/ JINDAL/ SURYA PRAKASH.

REPAIR OF CHARPOY TUBULAR FRAME WITH COMMERICAL PLY WITHOUT FMN SET (FD-CEPZ/SK-06/08-09)

Taking out existing unserviceble ply topr from the Charpoy tubular frame & tightening of frame.

Fixing of Plywood BWP grade AA type as per IS-710 of Make-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes. All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. All as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted frame by rectification, scratching and painting of two coats of synthetic enamel Black paint to frame of charpoy portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR OF CHARPOY MS TUBULAR FRAME WITH COMMERICAL PLY WITHOUT FMN SET (FD-CEPZ/SK-07/08)

Taking out existing unserviceble ply topr from the Charpoy MS tubular frame & tightening of frame.

Fixing of Plywood BWP grade AA type as per IS-710 of Make-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes. All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. All as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted frame by rectification, scratching and painting of two coats of synthetic enamel Black paint to frame of charpoy portion of approved make of Asian/Berger, all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE BED SIDE STEEL (FD-133 )

Taking out unserviceable top of table bed side and S&F of new top of size 600mm x 450mm made out of 18mm thick pre-laminated particle board exterior grade, ISI marked, one side with teak shade as approved and balancing white (Make-Century ply/Green ply/ Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified,shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable knob and S & F of new fancy knob fitted with stainless steel screw and washer best quality as approved by GE. all as specified and directed by Engineer-in- Charge.

M & L for welding work wherever required for repair to shelve, legs & door of table. Welding in repair not exceeding 2.5mm in length complete all as specified and as directed by Engineer-in- Charge.

Taking out unserviceable hinges and S & F of new hinges of mild steel of size 50mm of approved make, complete all as specified and as directed by Engineer-in- Charge.

Taking out broken shoes from table legs and S & F new PVC shoes 25mm square made out of hard rubber best quality as approved by GE and fixed with steel Screw. All as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel white paint to old & new portion of approved make of Asian/Berger all as specified and directed by Engineer-in-Charge.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

M.B TUBE AND ALLIED IND. Contr

vivek and co