REPAIRS AND MAINT OF CERTAIN BR AND EM WORKS TO SUDAN BLOCK SANTOSH GUPTA HALL MONOJ PANDEY BLOCK AND CERTAIN BLDG AT NDA KHADAKWASLA

Amount

S&F in repairs 100 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repairs 125 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repairs 150 mm Brass plate hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repair for 150mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black etc complete all as specified and as directed.

S&F in repairs extruded brass plate handle, fabricated type polished bright, 175mm long of shape complete all as specified and as directed

S&F in repairs extruded brass alloy handle, fabricated type polished bright, 150mm long, of shape complete all as specified and as directed

S&F in repairs extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc complete all as specified and as directed.

S&F in repairs decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc all as specified and as directed.

S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long etc all as specified and as directed.

S&F in repairs Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.

S&F in repairs Brass barrel tower bolt,heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.

S&F in repairs 150mm floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc all as specified and as directed.

S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 200mm etc all as specified and as directed.

S&F in repairs antique / ornamental Brass hevy duty Hinges, Aldrop, tower bolt, handles, latches, window/door stopper, sliding door bolt etc match to existing for doors, windows, ventilators & banister complete all as specified and as directed Make : M/S J Errana, Shri Laxmi Industries (P) Ltd, Classic or equivalent make as mentioned at list of makes in PS

Material & Labour in replacement for stainless steel (Grade 304) railing made of hollow tubes, etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

S&F in repairs steel curtain rod 25mm dia fixed including fancy type brackets and 6 hooks for each rod complete for fixing in repair etc complete all as specified and as directed

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed . Note : The necessary scafolding required shall be deemed to be included in quoted unit rate.

Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary and fill the gap, hole, or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door necessary grinding, sanding for getting smooth surface, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and as directed . Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling (ii) The necessary scafolding required shall be deemed to be included in quoted unit rate..

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick one side ground glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and as directed.

Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, chromium plated brass/ stainless steel screws complete as per architectural drawings complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each etc complete all as specified and as directed

Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each etc complete all as specified and as directed

M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed

ditto item No 26 above but exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed

S&F factory made 35mm thick 1st class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered wood medium density, supplied and fitted to chowkats, etc complete all as specified and as directed

S&F factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both faces is covered with decorative face veneer with lipping / frame to match etc complete all as specified and as directed

S&F factory made 30mm thick 1st class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), with synthetic enamal paint complete all as specified and as directed

S&F 100 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc ccomplete all as specified and as directed.

S&F 125 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed

S&F brass plate handle, fabricated type polished bright, 175mm long of shape complete all as specified and as directed

S&F extruded brass plate handle, fabricated type polished bright, 150mm long, of shape as directed

S&F extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.

S&F decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long etc complete all as specified and as directed

S&F Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F Brass barrel tower bolt, heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

M&L for preparation of new wooden surfaces and applying two coats of Synthetic enemal paint over a coat of pink primer etc complete all as specified and as directed

M&L for prepararion of wood surfaces and applying two coats of Melamine wood polishing by mechanical method (gun spray) of any description width or girth over one coat of melamine wood primer with wood fillar if necessary etc complete all as specified and as directed

Dismantling of timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section fixed as in framed work complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs / blankets, any thickness, including cover fillets complete all as specified and as directed

M & L for 4mm thick Non Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and as directed,

S&F asbestos cement plain building boards 4mm thk, fixed to timber /GI/MS framework with screws complete all as directed complete all as specified and as directed.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) in false ceiling including sunk or raised moulding (pattern approved by GE/interior designer) made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joints of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to Gl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of acrylic emulsion distemper of approved tint over a coat of primer complete all as specified and as directed. Note: i. Ceiling measurement to be taken as flat area i.e. floor area of the hall, no vertical portion to be measured; rate of vertical portion deem to the quoted rate of contractor. ii. Design of ceiling will provide at site by the Engr-in-Charge / user.

M&L for 20mm thick perforated sheet for acoustic purpose of existing size of Habibullah hall false ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and as directed ,

S&F 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq cm & n exc 6 sqcm complete all as specified and as directed

S&F 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and as directed

Material and labour in replacement of 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed

Material and labour in replacement of 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed

S&F in repairs 2mm thick veneered board one face decoretive etc complete all as specified and as directed

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified and as directed

M/L for IInd class hard wood in scantling exc 40 Scm in area clean sawn for unframed work complete all as specified and as directed

S&F in repairs for 40 mm thick 1st class hard wood Plained one side, with butt joints and fixed with nails etc all as spd and as directed

S&F in repairs 20mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 25 cm complete all as specified and as directed

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with mild steel chromium plated or aluminised hinging device including connection to drown pipe and flushing pipe complete all as specified and as directed

S&F in repairs Vitreous water closet (squatt pattern) 'long pan', size 580/630mm white with 'P' or 'S' trap, front or back inlet any pattren complete all as specified and as directed

S&F in repairs plastic water closet seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repairs PVC low level flushing cistern including brackets 10 litre capacity with inlet ball valve float, handle, flush pipe etc. complete all as specified and as directed.

S&F in repairs Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete etc all as specified and as directed.

S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and as directed .

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed

S&F in repair for Liquid soap container of glass bottle with stainless steel fittings fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) etc complete all as specified and as directed

S&F stay, suitable for existing health faucet complete all as specified and as directed

S&F in repairs vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed (including of fixing supply pipe to flushing cistern, trap and waste pipe) Make : Cera CALORIGO Cat part No S4020114, Cera CAPRIANA Cat part No S4020112 or equivalent make as mentioned at list of makes in PS.

S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with Wall Flange alloy screwed for iron pipe 15 mm bore complete all as specified and as directed Make: Jaguar PRS-CHR-077 or equivalent make as mentioned at list of makes in PS

S&F in repairs CP urinal spreader fixing with 15mm dia pipe etc complete all as specified and as directed.

S&F in repairs CP urinal connection pipe 15 mm bore 115mm length etc complete all as specified and as directed.

S&F in repairs counter top wash hand basin vitreous china white (angle back) of size 600x480mm, CI bracket 15mm dia polythene connection and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed

S&F in repairs counter sunk wash hand basin vitreous china white (angle back) of size 600x480mm, CI bracket 15mm dia polythene connection and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed

S&F in repair Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) etc complete all as specified and as directed.

S&F in repair 15mm pillar taps, self closing, long body, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed Make : Cera cat part No PRS-031L65 or equivalent make as mentioned at list of makes in PS.

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S&F CP Knob, suitable for Pillar tab Bib tab etc., complete all as specified and as directed

S&F in repairs SS gratings 100/125mm dia complete all as specified and as directed

S&F in repairs PTMT gratings 100/125mm dia complete all as specified and as directed

S&F in repairs 32mm dia waste coupling of PTMT (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and as directed

S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and as directed

S&F in repairs brass chromium plated tubular towel rail 20mm plate section D type 60cm long between flanges etc complete all as specified and as directed.

S&F in repairs for providing long body bib taps with wall flange ,cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. Make : Cera cat part No F1015151,Prayag model No 6509 (Matrix) or equivalent make as mentioned at list of makes in PS.

S&F in repairs for fancy type chromium type angle stop cock with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia etc complete all as specified and directed. Make : Cera cat part No F1020201 or equivalent make as mentioned at list of makes in PS.

Dismantling of cast iron 110/75 mm bore pipes jointed in cement motar including all fittings complete all as specified and directed

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes etc complete all as specified and as directed.

S&F CI bend 100 mm bore with oval access door etc complete all as specified and as directed..

S & F 100 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..

S&F CI cowl 100 mm size etc complete all as specified and as directed.

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 75mm bore pipes etc complete all as specified and as directed.

S&F CI bend 75 mm bore with oval access door etc complete all as specified and as directed..

S & F 75 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..

S&F CI cowl 75 mm size etc complete all as specified and as directed.

Taking down SWG / rainwater / PVC pipes 100mm / 75 mm dia/40mm (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., complete all as specified and directed

S&F Type B, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm dia PVC (SWR) junction single(single T), Type B complete all as specified and directed

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, Type B, complete all as specified and directed

S&F Type B, 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F Type B, 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F Type B, 75mm dia PVC (SWR) bends any radius etc complete all as specified and directed

S&F 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. Cm with all fittings Tee and Elbow etc and fixed to wall , floor etc.. complete all as specified and directed

Taking up or down ,15mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and directed

Taking up or down , 20mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and directed

Taking up or down , 25mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and directed

Supply & Fix 15mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

Supply & Fix 20mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

Supply & Fix 25mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe complete all as specified and directed.

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe complete all as specified and directed

S&F in repairs PVC flush tank ball cock set complete all as specified and directed.

S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.

S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in reairs brass mortice lock,100mm , 4 liver verticle type complete all as specified and directed

S&F in repairs door closer hydraulically regulated,aluminium (die cast) body ,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

M& L for cutting holes in brick wall / stone wall / PCC block walls exc one brick but not exc two brick in cement mortar for inserting holdfasts and making good dismantling portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed

Labour for small repair to hinges, tower bolt, handle, latches, sliding door bolt, towel rack etc complete all as specified and as directed.

Febrication only Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') etc complete all as specified and directed

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc., complete all as specified and directed

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Glazed full body coloured vitrified joint free tiles 1200x600x8-10 mm thick on vertical surfaces such as skirting/ dado laid over 10 mm thick backing coat in CM 1:4 with ROFF adhesive by Pidilite or equivalent, set and pointed with polymer modified tiles adhesive (colour to match) all as specified and directed

M&L for full body vitrified coloured non skid tiles, joint free, 8mm to 10 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in ROFF Epoxigrout to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed

M&L for 15 to 20 mm thick full body/ digital vitrified/ quartz Slab (of any type) for top surface of steps tread, skid surface, kitchen platform, table top Wash basin etc. pointed and jointed with ROFF Epoxigrout to match the colour of tile over 15mm thick screed bed in CM 1:4 etc complete all as specified and as directed.

M&L for colour Glazed ceramic tiles in vertical surface 450x 300x 7mm or 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:4 etc complete all as specified and directed

M&L for colour Glazed ceramic joint free tiles in vertical surface 600x 300x 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:4 with ROFF adhesive by pidilite etc complete all as specified and directed

M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and directed

M&L for 16 to 18 mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

M&L for 16 mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed

M&L for 18-20 mm thick granite work (Rough surface, lakha red, flamed where ever necessary,) (table rubbed 7 polished ) thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed

M&L for 20mm thick Marble (of any type any colour colour and shade matched with sudan block stair dado) tiles machine cut, in skirting/ dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:6 complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L for grinding / Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete etc complete all as spd and as directed.

M& L for sunken treantment to Floors of toilets/Baths/WCs/Kithcen as under :- (a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt) (c) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 100mm 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/ Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc

M&L for the following :- (a) M&L for Making hole and fix 12mm dia GI Nozzle @0.5 mtr c/c on the entire area of sunken portions and applying chemical injection grouting through the nozzles with cement slurry admixture with Dr fixit bath seal grouting or other equivalent with pressure pump in 40 PSI.seal off the nozzle and cutting the same after grout has set as specified and directed by engineer in charge (b) The tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

Taking down collapseable shutter area exc 4 sqm but n exc 15 sqm complete all as specified and directed .

S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as spefified, erected in position and securing runners with holdfasts and brackets complete all as per clause 10.24 of SSR Part - I 2009 complete all as specified and directed.

M&L for servicing, overhauling, greasing, easing of existing Collapsible gate of any area or thickness and applying one coat of synthetic enamel paint after preparation of old decorated surfaces on both surfaces etc complete all as specified and as directed.

Taking down rolling shutter area exc 4 sqm but n exc 15 sqm complete all as specified and directed .

S&F steel rolling shutters 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete, push pull or manual type complete all as specified and directed

S&F steel rolling shutters 1mm thick, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete, push pull or manual type complete all as specified and directed

M&L for servicing, overhauling, greasing, easing of existing rolling shutters of any area or thickness and applying one coat of synthetic enamel paint after preparation of old decorated surfaces on both surfaces etc complete all as spd and as directed.

M&L for two coats of synthetic enamel paint over a existing primer surfaces of steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed

M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.

All as per item No 152 above but for ceiling surface complete all as specified and as directed.

M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.

All as per item No 154 above but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as per item No 156 above but for Ceiling surface complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 158 above but for Ceiling surface complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 160 but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed

M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.

M & L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.

M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed.

M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.

M&L for prepararion of wood surfaces and applying one coat of Melamine wood polishing by mechanical method (gun spray) of any description width or girth with wood fillar if necessary to fill the crack and holes etc complete all as specified and directed

M & L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M & L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for one coat of Subsequent cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for one subsequent coat of white washing on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for preparation of old treated wall surfaces and applying one coat of luster paint using "Electrically Operated Airless spray technology Machine" all as specified and as directed.

M&L for prepration of old painted concrete surface and apply one coat of Plastic emulsion paint on walls exc 10 cm width or girth etc complete all as specified and directed

Ditto all as per item No. 174 above but in ceiling etc complete all as specified and directed

Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed

Fixing only Flag post with nails, screws or any suitable means at walls etc complete all as spd and as directed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc..complete all as specified and directed

M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 grade design mix and setting in cement mortar (1:6) complete all as specified and directed

M&L for providing rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even and smooth without using exta cement fair complete all as specified and directed

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and directed.

Demolition of cement concrete in ground floors and paving exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and directed.

M&L for Plain cement concrete in foundations, filling and mass concrete type B-1, 1:2:4 using 20 mm size graded stone aggregates etc complete all as specified and directed

M&L for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood, steel members or in PCC sub base exc 4 kg per Sqm etc complete all as specified and directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors 16 mm outer diameter including all fittings complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors 20 mm outer diameter including all fittings complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors 25 mm outer diameter including all fittings complete all as specified and directed

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth Stone concrete block or slab walls etc complete all as specified and directed

M&L for water proofing treatment of External walls, chajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capabity 3 Sqm per litre in 2 Coats without dilution and 1 coat of efflorescent resistant primer 10sqm/litre/coat on new plaster surface as per the manufacturers specifications and directions of Engr-in-Charge Make :- Raincoat of PlDlLlTE or equivalent. The product shall have following properties: Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202.

M&L for water proofing treatment of External walls, chhajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capabity 3 Sqm per litre in 2 Coats without dilution and 1 coat of efflorescent resistant primer 10sqm/litre/coat old surface / existing after cleaning the surface throughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of Engr-in-Charge Make :- Raincoat of PlDlLlTE or equivalent. The product shall have following properties: Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, et., complete all as specified and directed

M&L replacement of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) Ditto all as per item no.194 above but one 3 pin 6 Amps socket out let point on independent board.

(c )Ditto all as per item no. 194 above but One 3 pin 6 Amps socket out let point on same board.

(d)Ditto all as per item no. 194 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

(e) Ditto all as per item no. 194 above but One light point controlled by Two 2-way switches

M&L replacement of point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed

S&F in replacement PVC / polycarbonate lamp holders batten/Angle type complete all as specified and directed

S & F in replacement of switch piano flush type 6 Amps SP one way complete all as specified and directed

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination with box of 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

M&L in replacment of fan regulator switch/socket type electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge complete all as specified and directed.

S & F in replacement of switch piano type 20 Amps SP one way complete all as specified and directed

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination with box of5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L in replacement of wire less door bell AC 230 volts single phase ding dong type complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 1 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 2 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 3 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 4 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 5 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 6 gang box complete all as specified and directed

S & F in replacement of PVC unbreakable surface boxes of 7 gang box complete all as specified and directed

S&F in replacement modular switch piano type 10 amps one way one module complete all as specified and directed

S&F in replacement modular switch piano type 10 amps two way one module complete all as specified and directed

S&F in replacement modular Bell push, 10 Amp with neon indicator one module complete all as specified and directed

S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed

S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement of 1 module Blanking plates complete all as specifed and directed

S&F in replacement modular step type fan regulator 100W, 1/2 module complete all as specified and directed

S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 3 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 4 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 6 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 8 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 12 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 16 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 18 module complete all as specified and directed.

S&F in replacement for squre box, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

S&F in replacement for round plate, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply only 9 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and directed.

S&F in replacement of 10 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed

S&F in replacement of 20 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed

S&F in repalcement Surface type LED Downlight lights 12 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed

S&F in repalcement Surface type LED Downlight lights 30 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed

S&F in repalcement COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and directed. Make: Luker cat part no. LCOBSP12 or equivalent make as mentioned at list of makes in PS

S&F in replacement LED building security light fiitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed . Make- Luker LST-24SEN or equivalent make as mentioned at list of makes in PS

S&F in replacement Decorative wall mounting Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in replacement Decorative hanging table lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in replacement Decorative hanging with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in repalcement surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

Supply and fixing replacement of rigid non-metallic PVC casing capping, double lock type/PVC conduit (ISI marked) of size not less than 25mm, including all necessary accessories (e.g., bends, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete as specified and directed by the Engineer-in-Charge. The unit rate quoted shall includes the following: a) Supply of 25mm or larger rigid non-metallic PVC casing capping/conduit (ISI marked). b) Supply of all necessary accessories (bends, elbows, connectors, saddles, screws, etc.). c )Securing loose wiring within the casing/conduit. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations. f) Testing of the wiring after completion. Notes: Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work.

Supply and fix in replacement of flexible conduit pipes, ivory grey,white in colour, with a minimum internal diameter of 25mm. The conduit shall be of a type suitable for [Specify application, e.g., electrical wiring, data cabling, etc.]. Installation includes cutting, bending (where necessary), and securing the conduit as per the approved design and engineer-in-charge instructions complete all as specified and directed.

S&F replacement of rigid non-metallic PVC cable tray , double lock type (ISI marked) of size not less than 80x40mm, including all necessary accessories (e.g.,Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete as specified and directed by the Engineer-in-Charge. The unit rate quoted shall includes the following: a) Supply of 80x40mm or larger rigid non-metallic PVC cable tray. b) Supply of all necessary accessories (Bends (flat, internal, external), Risers, Couplers, Dividers, Support brackets, elbows, connectors, saddles, screws,round plate etc.. c )Securing loose wiring within the cable tray. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations. f) Testing of the wiring after completion. Notes: Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work.

Taking down Careful dismantling and removal of existing sub-main wiring, including cables, conduits, trunking, and all associated fixtures, regardless of type and size.This includes all necessary materials and labor to restore the surfaces to their original condition, or to an agreed upon condition.All work shall be carried out in accordance with the Engineer-in-charge's instructions and any relevant project specifications.If the wiring is to be salvaged, great care must be taken during removal.

M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

DARSHAN ENTERPRISES (BID ID -3310816)

Suraj Sukhdev More (BID ID -3321024)