SPECIAL REPAIR TO BLDG NOS P-92 AND P-93 (SINGLE JCOS LIVING) AT KALIMPONG MIL STN UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted aluminium zinc corrugated/ semicorrugated/ tile pattern or any other profile as directed steel sheet (galvalume base) of thickness 0.5mm, in colour having tensile strength of 550 Mpa as in roof covering/Cladding (zinc coating not less than 150 gm/sqm) to wall and profile as approved by GE and to be factory moulded and fixed with hot dipped galvanised with high durable protective triple coated self tapping screws/self drilling screws, to suit the roofing in customized colour matching with the colour of roof covering / cladding to wall and screws are to be fixed using torque adjustable electronic gun screws driller of suitable capacity complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips, valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

Demolition of cement concrete(unreinforced) in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for digital rectified floor tiles coloured matt finish 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for digital rectified floor tiles coloured matt finish 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado/skirting set t and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in Chajjas and the like complete all as specified and as directed.

M&L for RCC type B-0(1:2:4) 12.5mm graded aggregate as in slabs supported on walls, beams and Columns in floors shelves and the like complete all as specified and as directed.

Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and as directed.

Use & Waste of formwork to sides and soffits of floor or roof beam, beam haunchings and similar items including edges of flat rough finished surfaces complete all as specified and directed.

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compound all as specified and as directed.

M&L for applying two coats of oil bound distemper over one coat of priming paint over one coat of putty on newly prepared smooth wall surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over one coat of priming paint over one coat of putty to make a wall smooth surfaces complete all as specified and as directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint complete all as specified and as directed.

M&L for preparing of existing treatment and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint after preparation of wall surfaces complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position complete all as specified and directed.

S&F providing PVC false ceiling coloured choice of wooden pattern consisting of 600mm x 600mm, 5mm thick plain PVC sheet used as panels insert in a frame work made using anodized aluminium T-section of size 25mm x 25mm, 19 gauge or 1mm thick in square pattern of grid size 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of J hook and GI wire/6mm M.S. rods of required sizes to maintain proper level. The aluminium frame work is supported on side wall with the use of aluminium L-section of size 25 x 25mm angle etc complete all as specified and directed. (Note : The visible portion of aluminium should be match with approved colour and pattern of ceiling board).

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

M & L Precast cement concrete block masonry with solid blocks of type C-1 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all specified and as directed

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed.

S&F pressed steel frame of size 125mm x 60mm x 1.25mm thick for door with one or more rebates including necessary fixing, lugs, hinges, lock, strike plate, etc complete all as specified and as directed.

S&F 35 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for 10 mm thick cement mortar screed bed for wall tiling in CM (1:3) complete all as specified and as directed.

M&L for 20 mm thick cement mortar screed bed for laying floor tile in CM (1:6) complete all as specified and as directed.

M&L for coloured Glazed ceramic designer tiles (in two or more combination) 300x200x7mm thick as in dados set and jointed in neat cement slurry and pointed with white and coloured cement to match the surface complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing given in 8B-2 in SSR Part –II 2010.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and as directed.

S&F for Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F for 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 300mm length Aluminium alloy, anodised, sliding bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed.

S&F for 100mm size Butt Hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 15 mm dia bore steel tubing medium grade galvanised with all fittings laid in floor or fixed to wall and ceiling complete all as specified and as directed.

S&F in repairs 10 Ltr capacity PVC valueless syphonic action type flushing cistern low level white with inlet valve float and handle, incl bracket complete all as specified and as directed.

S&F in repairs vitreous china squatting pan “Orissa pattern” of size 580 mm x 440 mm with ‘P’ or ‘S’ trap, including connecting to trap and flushing pipe complete all as specified and as directed.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore complete all as specified and as directed.

S&F in repairs stop valves alloy screwed down high pressure with crutch or butter fly handle and fixed for 15 mm bore complete all as specified and as directed.

S&F in repairs of CP shower rose 125mm size complete all as specified and as directed.

S&F in repairs brass CP Towel Rail 20mm dia, D type, 60cm long between flanges etc. complete all as specified and as directed.

S&F in repairs of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with Chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F Vitreous china wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets and waste pipe complete all as specified and as directed.

M &L for PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed.

M&L for Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soils complete all as specified and as directed.

M&L for Hardcore of broken stone are boulders of gauge n.exe. 63 mm, deposited, spread and levelled in layers n.exc. 75 mm thick , watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 as in sub base of floor complete all as specified and as directed.

M&L for coloured & polished chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors including 20mm thick screed bed in CM 1:6 complete all specified and as directed.

Taking down old steel water tubing 25 mm bore and connection including removing from site of work complete all as specified and as directed.

Taking down old steel water tubing 20 mm bore and connection including removing from site of work complete all as specified and as directed.

Supply, laying and testing steel water tubing medium grade with all fitting fixed to wall/ceiling or laid in floor of size 25 mm bore complete all as specified and as directed.

Supply, laying and testing steel water tubing medium grade with all fitting laid in fixed to wall, ceiling or laid in floor of size 20 mm bore complete all as specified and as directed.

M&L for Cutting screwing in existing steel tubing for alteration or addition complete for pipe upto 50 mm dia complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) Conforming to IS 12701-1996 three layered hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I including taking down old water tank complete all as specified and as directed.

S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of size 25 mm complete all as specified and as directed.

S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of size 20 mm complete all as specified and as directed.

S&F ball brass valves with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 25 mm complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 M in deep for pipe line, foundation of poles/ laying of cables/ stay/ strut etc not exceeding 10 sqm on plan in soft/ loose type of soil, getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in trenches including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material from site to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

M & L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using extra cement) complete all as specified and directed.

S & F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of member of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

M&L premium quality rectified floor tiles coloured with matt finish of size exc. 0.06 sqm and n. exc 0.11 sqm in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light/ Exhaust fan/ Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per Srl item No. 89.00 here-in-before but for one 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and as directed.

All as per Srl item No. 89.00 here-in-before but for one 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and as directed.

All as per item No 89.00 here-in-before but for 15/16 amp multi purpose socket combination point on independent board/ metal clad socket for geyser point with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire complete all as specified and as directed.

S&F switch piano flush type 5 Amp single pole one way complete all as specified and as directed.

S&F switch socket combination 2 in one, 3/5 pin 5/6 Amps flush type complete all as specified and as directed.

S&F switch socket combination 2 in one 6 pin 5/15 Amp flush type all as specified and as directed

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and as directed.

S&F bell push AC 230 bolts complete all as specified and as directed.

S&F in replacement of bell ding dong AC 230 volts complete all as specified and as directed.

M & L for replacement of lamp holder, PVC/Polycarbonate type insulated body with batten/angle type for batten fittings along with 14 watt LED lamp complete all as specified and as directed.

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and as directed. (Cat Part No. 5076 11 of Legrand or equivalent model of Hager/ Siemens/ ABB)

S & F MCB, SPN, 10KA, 240V, "C" curve, 6-32 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4086 09 to 4086 17 of Legrand or equivalent model of Hager/ Siemens/ ABB)

S & F MCB, SP, 10KA, 230V, "C" curve, 06-32 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4085 87 to 4085 95 of Legrand or equivalent model of Hager/ Siemens/ ABB)

M&L for Earthing complete with galvanized steel earth plate electrode 600X600X6.3mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to galvanized earth lead wire 4 mm , by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh charcoal or coke and common salt in alternate layers, of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia reinforced bar 15 cm C/C and earth lead protection pipe of 20 mm dia. including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc.50m including taking down and dismantling and necessary testing complete all as shown on electrical plate no.5 of MES SSR Part I and as directed

Taking down and refixing of exhaust fan AC single phase 230/240 volts, any size any make after disconnection of electric connection complete all as specified and as directed.

S & F, IP 20, Class I, LED light fitting 1 x 20 W (4 FT), CRI >= 80, CT >=5700 K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No 20 W (4 FT) LED lamp with PC body or strip LEDs all as per OEM with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. (Cat Part No. LHEXBYPNIN1W020 of Make Havells or equivalent model of PHILIPS/ Surya/ Bajaj)

S&F LED bulk head fitting, 10 watt, compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 66 protection complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ and mounting on PVC rectangular board of 200mm x 250mm including dismantling unserviceable light fittings complete all as specified and directed. (Cat Part No. WT 202W LED 10S CW PSU S3 PC of Make Philips or equivalent model of Havells/ Surya/ Bajaj)

Supply and fixing Sleek LED mirror light fittings 2ft fitting Surface / Pendent Mounting provided with high output diffuser complete all as specified and as directed.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 V complete all as specified and as directed. (Cat No. 5078 11 of make Legrand or equivalent model of Havells/ABB/SIEMENS)

Taking down water storage heater(Geyser) any type, make, capacity and keep in safe custody and refixing the same including necessary electric/water connection all as specified and as directed.

S & F energy saving & environment friendly long life 25 W, CT >=5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz complete incl bracket made out of 40 mm dia light grade GI pipe duly fixed with MS clamps nut, bolts etc including connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed. (Cat Part No. ENDURA CITYLITE 25W of Make Havells or equivalent model of Philips/ Surya/ Bajaj)

Supply and laying dry fine sand cushioning to under ground cable provided with a layer of 23 cm thick (8 cm before laying and 15 cm thick after laying of cable) complete all as specified and as directed. (Note : punned thickness shall be measured)

Supply and laying reinforced precast concrete cable cover, class LV, type-2, flat size (300x180x40)mm for protection of cable complete all as specified and as directed.

Supply, laying, connecting and testing in trenches, under floors/roads or on walls cable XLPE insulated screened PVC bedded galvanized steel strip armoured with stranded earth system electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area of size 16 Sqmm 4 Core conforming to IS : 7098 (Pt-I)-1988 complete all as specified and as directed.

M & L GI tube light grade for passing through cables under the floor, along the wall or along the pole of 40 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and bolts/washers etc including taking down old GI tubing complete all as specified and as directed.

Note:- The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

MS BRAHMA CONSTRUCTION

HEM RAJ GURUNG

DEEP CHANDRA JOSHI

M/S G. K. SUTHAR

SANJAY SAW MILL

GARGO TRADERS