Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹48.7 L+₹2.1 L (4.43%)Rejected-Finance SURVEY NO 93 392 PACHMARHI NEAR MILITARY HOSPITAL PAHMARHI HOSHANGABAD M P 461 881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L2 | Rejected-Finance NOT ADMITTED BEING L2 | |
| 3 | L3₹49.4 L+₹2.7 L (5.81%)Rejected-Finance F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance NOT ADMITTED BEING L3 | |
| 4 | L4₹50.2 L+₹3.5 L (7.58%)Rejected-Finance SHARADA SMRITI H NO 840 VINAYAK KATHE ALI KEGAON ROAD URAN NAVI MUMBAI 400702 | RAIGAD | MAHARASHTRA | 400702 | L4 | Rejected-Finance NOT ADMITTED BEING L4 |
Tender Value
₹47.9 L
EMD Value
₹95,900
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
ADDN ALTN TO WINDOWS OF BLDG NO P 1116 KAILASH AND PROVISION OF HARD STANDING WITH COVER SHED NEAR REGIMENTAL SHOPS UNDER AGE BR I AT NAVAL STATION KARANJA
2023_MES_619441_1
8711/E8
Open Tender
Civil Works
Item Rate
180 days
GE NW KARANJA
D and above a i
8 documents required · 8 mandatory
₹500
Yes
GE NW KARANJA
₹95,900
Yes
16 Dec 2023
18 Sept 2023
18 Oct 2023
18 Sept 2023
16 Oct 2023
2 Oct 2023
Amount
Notes : (i) The work consists of 02 jobs as under:- JOB (A) : SO(K)/09/2020-21/LBW & JOB (B) : SO(K)/04/2023-24/LBW (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. COMMON B&R ITEMS FOR JOB 'A' & 'B' (for job wise details pls refer Appendix -A to BoQ)
Note:- The Unit Rate quoted in r/o Ser item No 1.02 to 3.09 are deemed to include for the following and nothing extra will be paid for these works: 1. Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. 2. Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.
M&L for applying 20mm thick (average) polymer modified ready mix cement based plaster on external surfaces finished even and smooth incl mix with WPC @ 3% by weight of cement complete all as specified and directed.
M&L for new or old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clean water & allow to dry. Fill visible cracks/ joints by chemistic crack seal caulking compound & allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter, apply 02 coats of chemistik PDS-50 (WB high build anti caronatin coating cum waterproofing) of approved shade by brush at an interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc complete all as specified and directed.
Preparation of newly or untreated plastered surface & M&L for applying two coats of oil bound distemper (OBD) over & including a coat primer complete all as specified and directed.
M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and incl 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab including rubbing and polishing etc., complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified & directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,star lock, rubber beading complete all as specified and directed.
S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, complete all as specified and directed.
OTHER THAN COMMON ITEMS FOR JOB 'A'
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified and directed.
M&L for Brick work with burnt clay bricks(old size) in cement mortar 1:6 , with subclass 'B' bricks, straight or curved in plan exceeding 6 m mean radius complete all as specified and directed.
M&L for pre-cast cement concrete block masonry with solid blocks, cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, exc 10 cm in width setting in cement mortar (1:4) complete including necessary form work complete all as specified and directed.
M&L for applying 15 mm thick (average) polymer modified ready mix cement based plaster on internal surfaces finished even and smooth complete all as specified and directed.
Formwork to sides and soffits of rough finish surfaces of concretefloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc complete all as specified and directed.
M&L for RCC (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
S&F MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed.
All as per BOQ item No. 2.09 above but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders complete all as specified and directed.
S&F Pre-painted galvalume alu zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to fix-410-W (Gde-E-250 quality-A). complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality) complete all as specified and directed.
S&F 1.60 mm thick plain mild steel sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc.complete all as specified and directed.
Preparing new surface of steel M&L for apllying 2 coats of synthetic enemel paint over a coat of red oxide complete all as specified and directed.
M&L for Hard core, broken stone/boulders to gauge n exc 63 mm complete all as specified and directed.
M&L for 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.
M&L for 40 mm thick, Cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floors complete all as specified and directed.
M&L for Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed.
M&L Machine cut kota stone slab 40-50 mm thick as in flooring, laid and set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing inc 20mm screed bed 1:6 complete all as specified and as directed.
Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed.
M&L for 100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work complete all as specified and directed.
M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
M&L for Forming Contraction(Dummy) joints 65 mm deep x 10 mm wide, filled with Grade 'A' sealing compound.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.
M&L for 75mm thick, PCC 1:3:6, type C-2 using 40mm graded stone agg finished even and smooth without using extra cement as in plinth protection.
Supply only integral water proofing compound complete all as specified and directed.
Demolition and breaking up drain pipes of dia 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
S&F RCC Pipe 200mm bore class NP-2 laid & jointed complete with colloar complete all as specified and directed.
M&L for concrete bed for 200 mm dia pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm inany type of soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed.
S&F Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof kerbs or mud stiops, rounded or chamfered on edges complete all as specified and directed.
S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified & directed. Note:- Grouting of tiles shall be carried out by spreading sceened sand on paver/tiles/blocks. Tiles/blocks shall be mechanical vibrated suitably as per the manufactures instruction to ensure that joints are filled up properly with sand. Extra sand on the surface shall be swept away/removed.
M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and directed.
OTHER THAN COMMON ITEMS FOR JOB 'B'
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm n.exc 4 Sqm complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each complete all as specified and directed.
M&L Silicon gun paste around windows of any size and any height of the building by using scaffolding complete all as specified and as directed.
S&F aluminium anodised tubular curtain rail, 20mm dia fixed between brackets complete all as specified and directed.
S&F aluminium anodised brackets, for 20mm dia curtain rail complete all as specified and directed.
M&L 8 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.
DEV ENTERPRISES
Advait Enterprises
DIGITAL SERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .