Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC being the lowest bidder | |
| 2 | L2₹49.9 L+₹1.5 L (3.06%)Rejected-Finance SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-Finance Not Being L1 Bidder | |
| 3 | L3₹52.5 L+₹4.0 L (8.33%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 Bidder | |
| 4 | L4₹52.8 L+₹4.3 L (8.88%)Rejected-Finance H NO 1 24 48 VENKATAPURAM PO TIRUMALGIRI SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L4 | Rejected-Finance Not Being L1 Bidder | |
| 5 | L5₹53.8 L+₹5.4 L (11.1%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 Bidder |
Tender Value
₹60 L
EMD Value
₹1.2 L
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE No 2 Secunderabad
CWE No 2 Secunderabad
SPL REPAIRS TO JCOS CLUB BLDG NO 14 AND 15 AT MCEME UNDER GE MCEME SECUNDERABAD
2022_MES_553388_1
81117/E8
Open Tender
Civil Works
Item Rate
270 days
GE MCEME Secunderabad
As per tender documents
7 documents required · 7 mandatory
₹1,000
GE MCEME Secunderabad
₹1.2 L
Yes
30 Nov 2022
21 Sept 2022
2 Nov 2022
21 Sept 2022
26 Oct 2022
12 Oct 2022
Amount
M&L for 2nd class hard wood timber scantlings clean sawn in framed work and fixed with nails including Dismantling of timber scantlings 40 Sqcm and over in section as in framed work in any position all as specified and as directed.
Preparing surfaces of wood and wood based materials , new or old of any description and girth not otherwise described and treated with creosote. all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 -W (Gde E- 250) quality A all as specified and as directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TCT, AZ150) of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws including Dismantling of single layer Mangalore pattern or similar tiles in roofing and Dismantling battens for tiles spacing exc 15 cm. all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TCT, AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including Dismantling of single layer Mangalore pattern or similar tiles in roofing and Dismantling battens for tiles spacing exc 15 cm. all as specified and as directed.
M&L for providing, cement concrete Type B0 1:2:4 (12.5mm graded graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces over 10cm in width or girth, not otherwise described in any pattern. all as specified and as directed.
M & L Preparation of old painted steel surfaces of any description over 10 cm in width or girth andapplying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L for 75 mm thick Cement concrete type B- 2 1:2:4 (40mm graded aggregate) in sub base /floor including demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises all as specified and as directed.
M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.
M&L Anti-skid / Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.
M&L glazed ceramic coloured tiles 450x 300x 6 to 7mm thick on vertical surfaces such as dados, wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces including M&L Rendering 10 mm thick in CM (1:4) finished rought to receive wall tiles and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.
Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 including demolition of Brick work or stone boulder masonry, built in cement mortor or cement lime mortar complete all as specified and as directed.
Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified and as directed.
M&L for granite slab 18 to 20mm thick of approved colour fixed over screed bed incl pointing, jointing with coloured cement to match for kitchen slab including M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes . all as specified and as directed.
Rounding off edges of granite platform/urinal partition all as specified and as directed.
M&L for rendering 10mm thick cement plaster 1:6, incl finishing even and smooth without using with out extra cement on internal faces. all as specified and as directed.
M&L for rendering 15mm thick cement plaster 1:6 in two layers incl finishing even and fair without using extra cement on external surfaces with water proofing compound (water proofing compound measured and paid separately) all as specified and as directed.
M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as specified and as directed.
M&L for complete removal of existing surfaces on walls and applying two coats of oil bound distemper over two coat of wall care putty over a coat of alkali resisitant primer complete all as specified and as directed.
M&L for preparation of new surfaces of walls etc, and applying two coats of exterior weather proof paint over one coat of external primer complete all as specified and as directed.
M&L for complete removal of existing treatement including preparation of old decorated surfaces of wall and cornices and applying two coats of acrylic weather proof painting over one coat of primer over wall car putty on wall to make surfaces smooth and good complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick with fair finished surfaces complete all as specified and as directed.
M&L for RCC Type B1 1:11/2:3 ( 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.
M&L for TMT bar 6 mm to 8mm dia cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or seccuring with clips quility confirming to Deformed or twisted bars. all as specified and as directed.
M & L for 18/19 mm thick, Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, etc completed all as specified and as directed..
M & L 2nd class hardwood exc 3 sqcm & n exc 6 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails orbrads complete all as specified and as directed
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap 30 mm all as specified and as directed.
40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and as directed.
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and as directed.
M&L 2nd class hard wood plain fillets sectional area exc 13 sqcm but n. exc 25 sqcm square(as in chowkats of CBs) , rectangular in section, wrought and smooth finish, secured with nails or brads complete incl polishing all as specified and as directed.
M&L for 6 to 7 mm thick gypsum board panels 600 x600 mm with PVC laminated on one side and aluminium foil on another side suitably placed in false ceiling grid made of aluminium GI /MS including Anodised aluminium snap grid of 605 X 605mm frame work for false ceiling including hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and xpansion hold fasteners 12.5mm dia. 40mm long including Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and as directed.
M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement including demolition of cement concrete (unreinforced) of any description and paving n.exc 15cm thick and removing rubbish off the premises complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and as directed.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified and as directed.
Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.
S&F Windows/ ventilators (NCL ECO – 4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay and 4MM Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6mm x 12mm MS flat and fixed to window frame with screws complete all as directed MAKE: NCL
M&L for one coat of synthetic enamel paint including preparation of old wooden surface of any description over 10 cm width and girth. all as specified and as directed.
S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and as directed.
S/F 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed.
S/F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
M&L for 4 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, etc complete including Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one all as specified and as directed.
Supply and fixing and in repair vitreous china wash down water closet pan (pedestal pattern) white includig fixing bolts (excluding flushing cistern and flushing pipe) with Plastic water closet seat, black/white, closed pattern with flat bottom and cover including mild steel chromium plated aluminiged hinging device and making good disturbed surfaces with cement mortar1 :3 complete all as specified and as directed.
S&F in repair, PVC valveless, 10 litrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, etc complete all all as specified and as directed.
S&F in repair viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete all as specified and as directed.
S&F Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, Bore of pipes in 40mm, complete all as specified and as directed.
S & F in repair fancy typ Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe all as specified and as directed.
S & F in repairs, CP 15mm, stop valves/ angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed.
S & F 15mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including Taking up or down steel tubing & connections, 15 mm dia all as specified and as directed.
S & F 20mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including Taking up or down steel tubing & connections, 20 mm dia all as specified and as directed.
S&F in repair fancy type bib tap cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, screwed for iron pipe all as specified and as directed.
S & F PVC (SWR) floor trap, plain with Chromium plated grating including jointing with solvent cement with 75 mm outlet dia all as specified and as directed.
S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good all as specified and as directed.
S&F PVC ( SWR) soil waste pipe in any length Single socketed with rubber ring jointed laid in trenches or in floors 110mm dia bore of pipe ISI marked. all as specified and as directed.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors, including necessary brackets all as specified and as directed .
M&L for cutting into existing manhole for connecting new drain, making good pipe and rending cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 160mm dia. all as specified and as directed.
S&F PVC (SWR) bends any radious 75mm bore all as specified and as directed.
S&F PVC (SWR) bend 110 mm dia. all as specified and as directed.
S&F Shelf of PTMT fixed with and including Chromium Plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) all as specified and as directed.
S&F Soap Dish Holder of stainless steel all as specified and as directed.
S& F brass chromium plated shower rose 125mm size all as specified and as directed.
S& F in repair rotational moulded polyethylene water storage tanks 1000Ltr (cylinderical vertical with closed top) including dismantling water tanks and also necessary float ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed .(Minimum weight 20mm - 210 gms) hoisted and fixed in position , complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 ( using 20 mm graded aggregate) in , copings, haunching and benching the like including weathering, slightly rounded or chamfered angles and throating and all as specified and as directed.
M&L precast cement concrete type B1 1:2:4 type B1 (20mm graded aggregate) as in Manhole / Gully trap cover slab including use and waste of necessary form work set in CM 1:6. all as specified and as directed.
M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, with water proofing compound finished even and smooth without using extra cement. all as specified and as directed.
M&L for 150 mm dia bore reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars etc complete all as specified and as directed.
M & L for cement concrete 1:4:8 type D2 to bed to drain pipe including packing under and hunching against sides of pipes after they are laid and tested for 150 mm dia pipe all as specified and as directed.
Excavating in trenches n exc 1.5m wide and not exc 1.5m depth; for foundation, etc not exc 10 sqm on plan and getting out in hard and dense soil. all as specified and as directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm in soft and loose soil all as specified and as directed.
Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point all as specified and as directed.
S/F 100mm size aluminium anodised handles, fabricated type complete all as specified and as directed.
S/F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
M&L for 125 mm Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 105 x 60 mm complete all as specified
M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling in frame complete all as specifed and directed.
S&F mild steel flats 25x3 as in hold fasts all as specified and as directed.
M&L for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercials type on both sides complete all as specified and as directed.
S&F of 30mm thick Second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or all as specified and as directed.
S/F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.
S/F in repair Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth.
S&F 100 mm long MS butt hinges with galvanised mild steel hinge pin anodised and fixed complete all as specified
S&F MS helical door spring 300 mm long with roller and roller plate complete all as specified.
M&L for 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) in floor all as specified and as directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and as directed.
Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed.
Material and labour for concealed point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including concealed non metallic rigid PVC conduit medium duty ISI marked of minimum 20 mm dia conduit concealed wiring including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly including cutting and chassing of wall complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP all as specified and as directed.
All as per item No. 92 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator all as specified and as directed.
All as per item No. 92 above but for One bell point controlled by one bell push switch all as specified and as directed.
All as per item No. 92 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board all as specified and as directed.
All as per item No. 92 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board all as specified and as directed.
All as per item No. 92 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.0 Sqmm copper conductor PVC wire as earth continuity conductor on independant board all as specified and as directed.
Supply and fixing of Switch piano , single pole one way, flush type 6 Amps capacity 230 volts complete all as specified.
Supply and fixing bell push 5 Amps, single pole flush type one way complete all as specified and as directed.
Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 6 amps flush type complete all as specified.
Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 6 amps flush type complete all as specified and as directed.
Supply and fixing switch socket combination 2 in 1 multipurpose 3 pin 6/16 amps flush type complete all as specified and as directed.
Supply and fixing of electronic ceiling fan regulator stepped type suitable to work on 230 volts complete all as specified and as directed.
Supply and fixing Bell Buzzer ding dong, AC 230 Volts, SP complete all as specified and as directed.
Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.
Material and labour for concealed Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including cutting and chassing of wall & removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed .
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10/12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix LED energy efficient building security light fitting of capacity of 35 W with IP 65/66for fixing in GI pipe bracket on wall complete all as specified and as directed. NOTE : GI bracket, clamp, nut and bolt etc will be measured in separate item.
Supply & fixing galvanised iron tube bracket of 40 mm dia light grade and 1.2 mtr length for fixing building security light, with all fixing arrangement including necesssary clamp, nut and bolt etc. as required size all as specified and as directed
Supply and fixing lamp holder insulated body with back plate for angle batten fitting fixed with round block including LED bulb 9 W non dimmable type complete all as specified and as directed.
Disconnecting and removing fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and replacement of split pins/ cotter pins and check nuts etc overhauling, lubricating , reassembling, refixing in original position complete all as specified.
Rewinding of burnt ceiling fan of 1200 / 1400mm sweep of any make and model with supper enameled copper wire of suitable size and using insulating material of good quality, varnishing complete all as specified and directed by Engineer -in-charge.
Supply only Sealed ball bearing suitable for ceiling fan of any size(set of two) all as specified and as directed.
Supply only Rotar shaft suitable for ceiling fan of any size all as specified and as directed.
Supply only Rubber bushes with MS clamp,bolt and nut suitable for ceiling fan of any size all as specified and as directed.
Supply only Fan condensor 2.5 mfd suitable for ceiling fan of any size all as specified and as directed.
Materials and Labour for one coat of spray painting, super glossy to fan body including blades with white colour, after removing of loose paint, rust dust and oily particle by scraping , complete all as specified and as directed.
Supply and fixing Exhaust fan, heavy duty, 230/300 mmsweep metal body with louvers, AC single phase, 230 Volts, 1400 rpm and connecting up with and including necessary 3 core PVC insulated copper flexible cord of size 23/0.019 from exhaust fan to the ceiling rose including making hole in the wall and making good edges in cement plaster complete all as specified and as directed. Make: Havells/Crompton/Bajaj
Supply and lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 35 Sqmm , 3.5 core all as specified and as directed.
Supply, spread river sand of approval in cable trenches providing for cable cushioning all as specified and as directed. NOTE :- Punned thickness of sand only will be measured and paid.
Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm all as specified and as directed.
Supply and fixing medium grade GI tubing of 50 mm dia for XLPE cable protection complete all as specified and as directed
S & in replace of Vertical type MCCB TPN DB 4 way double door made out of CRCA sheet housing with powder coating complete all as specified and as directed.
Supply and replace MCCB 4P, 415V,16KA, 100 amps suitable for Vertical MCCB DB all as specified and as directed .
Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface. all as specified and as directed.
Supply and fix in repair MCB SPN 40 Amps 240 volts for fixing on MCB DB. all as specified and as directed.
Supply and fix in repair MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB. all as specified and as directed.
Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to DBs/main switch incl provn of concrete pit in PCC , GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr complete all as specified and as directed. Note :- Item of Earthing includes cost of earth work, 7.5m long galvanised iron earth lead 4mm size and protection pipe of 15mm bore GI light grade.
SAI RUPA CONSTRUCTIONS
K LAKSHMAN SINGH AND CO
Sri Associates
BHEEMRAO PATIL CONTRACTOR
PAVAN ENTERPRISES
NEWS CONSTRUCTIONS
HARSHITHA INFRA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .