SPL REPAIR TO CEILING FAN, EXHAUST FAN AND WALL FAN AGAINST BER AND PROVN OF ELECTRIC METERS WORK UNDER GE (E) MATHURA

S&F Ceiling Fan having sweep 1200 mm, 3-blades of aerodynamic ABS material (dust & mark resistant), energy-efficient BLDC motor single phase with inverter technology consuming not more than 28 W at rated speed of approx. 280 RPM and air delivery not less than 245 m³/min. The fan shall be supplied without LED under light and in Pearl White colour finish only. The fan shall include RF remote control with timer (up to 8 hours), sleep/breeze modes, and memory function. Noise level shall be whisper-quiet. The fan shall have 5-Star energy rating,Service value not less than 7.40, 2 years manufacturer’s warranty, and be BIS/ISI marked wherever applicable. Installation shall be carried out by authorized service personnel with all accessories complete as per manufacturer’s standard.

S&F Ceiling Fan having sweep 1400 mm, 3-blades of aerodynamic ABS material (dust & mark resistant), energy-efficient BLDC motor single phase with inverter technology consuming not more than 28 W at rated speed of approx. 250 RPM and air delivery not less than 300 m³/min. The fan shall be supplied without LED under light and in Pearl White colour finish only. The fan shall include RF remote control with timer (up to 8 hours), sleep/breeze modes, and memory function. Noise level shall be whisper-quiet. The fan shall have 5-Star energy rating, Service value not less than 7.40, 2 years manufacturer’s warranty, and be BIS/ISI marked wherever applicable. Installation shall be carried out by authorized service personnel with all accessories complete as per manufacturer’s standard.

S&F down rod MS grade 15 mm bore of length upto 90 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as directed.

S&F down rod MS grade 15 mm bore of length upto 180 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as directed.

Taking down aluminium/copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, flourescent tube light fittings etc, removing materials to store for keeping in safe custody or for taking credit and making good to the disturbed surfaces of walls, ceilings and floors etc complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring for One Light/fan point controlled by one way switch 5 amp, with 1.5 Sqmm (nominal area) single core PVC insulated sheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:-

All as per item No. 6 here in above but for One 3 pin 5 Amps socket point controlled by one way switch on same board.

All as per item No. 6 here in above but for One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No. 6 here in above but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fix Modular switch 6 Amps single pole one-way, 1 Module complete as per existing, as specified and directed by Engr- in- Charge.

Supply and Fix Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete as per existing, as specified and directed by Engr- in- Charge.

Supply and Fix Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply and Fix Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

S&F in repair switch piano fiush button, single pole one way 5 amps.

S&F in repair switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

S&F in repair socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

S&F in repair socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

S&F step type electronic fan regulator modular type 1M complete all as specified and directed by Engr-in-Charge.

S&F Modular Fan step regulator, 120W, 2 module complete all as specified and directed by Engr-in-Charge.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engr-in-Charge.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting with following MCCB & MCBs with connections :- (i) MCCB 125 Amps, 4 Pole, 16 KA - 01 Nos Note : - MCCB & MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

S&F in repair MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified.

S&F in repair MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified.

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified.

S&F in repair MCB SPN 40-63 Amps, 'C' series, bracking cap10KA, 240V complete all as specified.

S&F in repair MCB SPN 16-32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified.

S&F in repair MCB SP 6 - 32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified.

S&F MCB SP 6 - 32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified.

S&F MCB SPN 40-63 Amps, 'C' series, bracking cap10KA, 240V complete all as specified.

Taking down carefully by submain wiring of any type complete and making good disturbed surfaces to match with the existing surfaces all as directed by Engineer-in-Charge.

M&L for submain wiring with Two runs of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded copper conductor FRLS PVC insulated unsheathed cables conforming to IS : 694 drawn through and including concealed in wall rigid medium duty unplasticised conduit of size 20-25mm dia conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia and accessorie all conforming to IS specification complete. Note: Two runs 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC conduit will measured as one RM).

All as per item No. 31 here in above but for 6 sqmm.

All as per item No. 31 here in above but for 10 sqmm

M & L for 3 core copper conductor 0.75 sqmm conductor area, PVC insulated, PVC round sheathed multicore, 1100 volt, including suitable size Casing Caping including taking down old U/S wire complete all as specified and directed by Engr-in-charge.

All as per item No. 34 here in above but for 2.5 sqmm

S&F capacitors 2.5 MFD suitable for all types of fans complete all as directed by Engr in Charge. Note : Manufacturing date should be not 3 month old from date of purchase

All as per item No. 36 here in above but for 4.0 sqmm

S&F in repair Metal SP enclosure with 2 pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and directed.

S&F MCB SP 40-63 Amps, 'C' series, bracking cap10KA, 240V complete all as specified.

S&F in repair of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch/socket and complete connection all as directed.

All as per item No. 40 but for 8 way to 12 way

Supply, install, testing & commissioning of Microprocessor based single phase tamper proof electronic static pre paid / postpaid energy meter rating 240 Volts, 50 Hz, of range 10-60 Amps, confirming to IS 13779 with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh / KVA, default /in built dual source, inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulatorand also compatible for Prepaid and Postpaid online energy monitoring billing system, with disconnection / reconnection through remote software / data export to ERP complete all as specified and as directed by Engr-in-Charge. (i) Meter should made properly synchronise and working with existing prepaid billing server /software / DCU (Existing make: Elmeasure) for collection of data / billing / disconnection / reconnection through remote software complete upto satisfaction level of Engr-in-charge. (ii) Cost includes two years defect liability including configuration of replaced / repaired hardware/software

Supply, installation, testing and commissioning of Outdoor LoRa accumulator for long range communication up to 1KM suitable for communicating with Prepaid come postpaid meter with LoRa communication protocol and the data transfer to the existing Elnet V5 Software complete all as specified and as directed byEngr-in- Charge. with the following specifications: (i) Data Concentrator Unit (DCU) / Gateway compatible for remote Automatic Metering Infrastructure (AMI) solution. (ii) It should be synchronise and communicating with the existing data server (Existing server/software: Elmeasure) through GPRS / Ethernet. (iii) It would have internal memory to store data of at least 150 modules. (iv) It would have inbuilt battery back-up. (v) It would have IP-67 protection and suitable protection cage for monkey. (vi) Coast includes two years defect liability including configuration of replaced / repaired hardware/software, one year SMS pack for maximum 1000 sms per month. (vii) The cost of pole /fixing /mounting arrangement on which the accumulator to be installed and SMPS power supply with UPS backup (300VA) is deemed to be included in theunit quoted rates

S&F PVC enclosure meter box with Isolator option suitable for single phase meter, concealed type, powder coated ivory complete fixed in existing wall and repair to disturbed area with cement plaster work and applying plaster of paris putty of 1 mm thickness over the plastered surface and painting work as directed.

M&L for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.