Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ADMITTED |
| 2 | Accepted-Technical | Accepted-Technical ADMITTED |
| 3 | Accepted-Technical | Accepted-Technical ADMITTED |
| 4 | Accepted-Technical | Accepted-Technical ADMITTED |
Tender Value
₹9.6 L
EMD Value
₹9,627
Closing Date
6 Jul 2026, 5:00 pmClosed
EXECUTIVE ENGINEER
TOWN HALL, CHHATRAPATI SAMBHAJINAGAR
Providing Pavement Block at Pet Crematorium Site at Kanchanwadi, Chhatrapati Sambhajinagar.
2026_AMCA_1312419_1
CSMC/Dy.Eng/Building/2025/476
Open Tender
Civil Works
Percentage
30 days
TOWN HALL, CHHATRAPATI SAMBHAJINAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
₹9,627
5 Aug 2026
29 Jun 2026
8 Jul 2026
29 Jun 2026
6 Jul 2026
29 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum,
including removing the excavated material up to a distance of 50 m. beyond the
building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 21.02 | 114.52 | M3 | 217.04 | ₹24,855.42 |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. (SSR No:- 2.25) | 114.52 | M3 | 204.46 | ₹23,414.76 |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling
voids with Crushed sand/grit, ramming, watering etc. complete | 47.1 | M3 | 2,050 | ₹96,555 |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site,
spreading in uniform layers with motor grader / Paver on prepared surface
and compacting with vibratory power roller to achieve the desired density,
complete as per clause 401 -- Plant Mix Method and Grading - II Material As per SSr item no.3.02 | 32.75 | M3 | 2,663.4 | ₹87,226.35 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of
trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 24.08 | 35.15 | M3 | 7,101.36 | ₹2,49,612.8 |
| 6 | Providing and fixing 80mm thick factory made hydraullical pressed Mechanically vibratred and compacted perssed interloking cement concrete paving block in M40(Ordinary) grand of approved size andtop surface 10mm in whith cemant with colour pigment including cost of all material manufacturing curing transportation of blocks to work site inculding loding, unloding and stacking as directed laying paving block in position over prepared 6mm crushed stone metal bed of 50mm thickincluding necessary excavation in all strata, spreading blindage of 6mm crushed stone metal over the finaly prtpared surface, compacting block by plate vibrator etc. As directed by Engineer in charge. | 327.5 | M2 | 1,216.99 | ₹3,98,564.23 |
| 7 | Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres | 2,000 | Liters | 11 | ₹22,000 |
| 8 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges,
locking arrangements and painting in three coats of oil paint of approved colour
and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)
Spec.One Number: As directed by Engineer- in-charge. | 24 | Sq.M | 2,201.85 | ₹52,844.4 |
| 9 | P/F 3mm thk ACP Name Board as per given matter and design as directed by engineer in charge. (As per before approved quotation in work of repair and coloring on occasion of marathwada muktisangram divas 2025) | 15 | Sq.Ft | 510 | ₹7,650 |
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
BOQ_2250923.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .