SPECIAL REPAIR TO BUILDING NO P-22 (OR LIVING) OF AN INF BN UNDER AGE BR-II OF GE(N) MAMUN AT MAMUN MIL STN

Amount

Taking down chowkats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down chowkats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified and directed.

Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shuters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on Drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on Drg No CEPZ-TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 75x50mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

Supply and fixing of 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.

Material and labour for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Supply and fixing of Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed prelam PVC sheet used instead of plain colour PVC sheet, edges will be painted to match with prelam sheet, reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

Supply and fixing of factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on the back face, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as directed

Supply and fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed.

Material and labour for prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.

Material and labour for prepration of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified.

Material and labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

Supply and fixing of 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

Supply and fixing of aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

Supply and fixing of 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Supply and fixing of 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing of stainless steel 100 mm long Butt hinges, heavy weight, complete all as specified and as directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed..

Material and labour for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and fair without using extra cement with WPC over finishing layer complete all as specified and directed. (Note:- WPC shall be measured and paid seperately)

Material and labour for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 05 mm thick cement plaster on faces of concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

Material and labour for breaking/dismantling, cleaning of loose concrete, replacement of corrosive reinforcement and filling plain cement contcrete 1:1.5:3 type B0 using 12.5mm graded aggregate at place like chajja, sunshades, roof projection, fascia, beams, columns etc including neccessary form woks, complete all as specified and directed. Note i) The cost of scafoldings, formworks deemed to be including in quoted rate of contractor. ii) Reinforcement shall be measured and paid seperately

Material and labour for rendering or plastering work 10mm thick in CM 1:3 in fascia / sides & edges including ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement.

Material and labour for Preparing new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic, antifungal emulsion exterior weather proof paint over primer on external surfaces, complete all as specified.

Material and labour for Preparation of new plastered surface of walls, applying 1mm thick wall care putty to desired even and smooth and levelled surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and labour for complete removal of existing treatment by mechanical snader from wall including minor repair to make surface good in cement mortar 1:6 or with POP to obtain smooth surface and applying 1mm thick wall care putty to desired even and smooth and levelled surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Material and labour for complete removal of existing treatment by mechanical snader from wall including minor repair to make surface good in cement mortar 1:4 and applying two coats of acrylic, antifungal emulsion exterior weather proof paint over primer on external surfaces complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of old plastered surface wall after complete removal of existing treatment by mechnical snader including minor repair to make surface good in cement mortar 1:6 or with POP to obtain smooth surface and applying two coats of white wash, complete all as specified and directed.

Material and labour for preparation of old plastered surface of ceiling by mechnical snader including minor repair to make surface good in cement mortar 1:3 or with POP to obtain smooth surface and applying one coats of white wash, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

Material and labour for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement laid over 15 mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises and roughening surface of old concrete floor by picking, sweeping clean and washing with water complete all as specified & directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement laid over 15 mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises and roughening surface of old concrete floor by picking, sweeping clean and washing with water complete all as specified & directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado/risers etc set and jointed in neat cement slurry and pointed in coloured cement laid over 10 mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises complete all as specified & directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified & directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg per sqm complete all as specified and directed.

Material and labour for green marble work 15-18 mm thick (table rubbed and polished) in cooking platform, window cill, steps, stair case trade & riser etc over 15 mm screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra, complete all as specified and directed.

Material and labour for edge moulding to marble stone any description 15-18mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Supply and fixing in repair stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Supply and fixing in repair bib taps for 15 mm dia bore pipe, chromium plated cast copper alloy screwed down crutch butterfly handle with brass ferrule fixed in repairs complete all as specified and directed.

Supply and fixing in repair stop valve concealed type cast copper alloy (ISI Marked) chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Supply and fixing in reapirs Vitreous china ware oval counter type wash basin, white flat back, size 560 x 470 mm including waste pipe and fixing on granite counter top and 32 mm dia PVC waste pipe including waste copling 32mm size full thread, complete all as specified and directed.

Supply and fixing of 15 mm bore Pillar taps (ISI marked), fancy swan neck type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fixing in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified.

Supply and fixing in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified.

Supply and fixing in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified.

Supply and fixing in repair corner shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified.

Supply and fixing in repair CP Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified.

Supply and fixing in repair CP shower rose with or without swivel joints, size 200x200mm, including fixing to steel pipe or union complete all as specified and directed

Supply and fixing in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

Supply and fixing in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes), including making connections to trap, and to flush pipe including plastic seat and cover (as directed ) with stainless steel or aluminised hinging device and fixed complete all as specified and directed.

Supply and fixing in repair low level PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

Supply and fixing in repair stainless steel towel rack size 18 inch round with swivel towel bar with towel hook design fitting with SS screws, complete all as specified.

Supply and fixing of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.

Supply and fixing in repair PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.

Supply and fixing of PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls having strength not less then 6kg/cm2 with and including clamps complete all as specified and directed.

Supply and fixing of PVC(SWR) pipes 75mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls having strength not less then 6kg/cm2 with and including clamps complete all as specified and directed.

Supply and fixing of PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length laid in trenches or in floors having strength not less then 6kg/cm2 complete all as specified and directed.

Supply and fixing of PVC(SWR) pipes 75mm dia bore, single socketd , in any length with rubber ring joints , in any length laid in trenches or in floors having strength not less then 6kg/cm2 with and including clamps complete all as specified and directed.

Supply and fixing in repair PVC(SWR) 75mm vent cowl complete all as specified and directed.

Supply and fixing in repair PVC(SWR) 110mm bore junction single (Single T) equal or unequal, complete all as specified and directed.

Supply and fixing in repair PVC(SWR) 75mm bore junction single (Single T) equal or unequal, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) 110/75mm bore reducer, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) bend any radius 110mm dia bore access door, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) bend any radius 75mm dia bore with access door, complete all as specified and directed.

Supply and fixing of PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

Refixing of old steel tubing 15 mm dia bore medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

Refixing of old steel tubing 20 mm dia bore medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

Supply and fixing of 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Material and labour for cutting chases pinning in brick work and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed.

Supply and fixing of 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Supply and fixing of 2000 Litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I including Ball brass valves, high pressure,with polythene float and flynut and disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, complete all as specified and directed.

Supply and fixing in repair grating square 150mm size of PTMT (minimum weight 100 grams) with or without waste hole, complete all as specified and directed.

Supply and fixing in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.

Material and labour for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid compound as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. Note : WPC shall be measured and paid separately

Material and labour for bitumen blown any grade, applied hot, two coats to concrete/plastered surface at the rate of 1.5 kg per sqm per coat and applying polythene flim black 50 micron complete for sunken floor slab and embedded in side wall/covered fillet complete all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed.

Material and labour for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and directed.

Demolition of old bitumious treatment, lathing, single or double including plaster or fiber/chicken wire lathing etc from roof top complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) in roof padding in slope/to maintain levels, surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-1 ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping/gola, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed.

Material and labour for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid compound as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. Note : WPC shall be measured and paid separately

Material and labour for remove all loose gravel, cement mortar, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application water proofing and repair all joints & crack with highly elastic bituminous cold applied putty tarplasic or equivalent make having penetration after setting upto 8mm and waterproofing application with following specification complete all as specified and directed :- (a) Create SSD condition on surface with water and prime the surface with Tarfelt LM or equivalent in other approved make mixed with potable water in ration of 1:1 and apply @ 400 gm per Sqm of mixture and allow it to touch dry. (b) Apply first coat of Tarfelt LM or equivalent in other approved make having elongation 200% confirming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700 gram per sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10 to 12 Hrs. (c) Apply 2nd coat on cured first coat with consumption @ 700 gram per sqm in oppsite direction of first coat by brush or roller. Ensure final curing time of 36 hrs before allowing/carrying out any further work. Conduct ponding test after 7 days of curing at ambient temperature. (d) Apply two coat of UV resistant elastomeric exterior acrylic weather resiatant water proof coation shalicryl-215 or equivalent in other make having elongation of 300% after curing of 14 days confirming to ASTM-D-6083 for UV protection of bituminous elastomeric acrylic emulsified liquid membrane tarflet LM to give long life & prevent its deterioration from sunlight. Note : Application of water proofing treatment will de done by Authorised applicator only.

Supply only liquid water proofing compound complete all as directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment as per IS 6313(Part-3):latest amended along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron/plinth protection complete all as specified and directed

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment as per IS 6313(Part-3):latest amended treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with flyash old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Supply and fixing in repair 25 mm bore stainless steel, curtain rod (wall thickness not less than 1.25mm) including fancy type brackets, funnels etc suitable for curtain rod etc complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:4, as in cover slabs for manholes ,drain etc with plain fair faces casted in angle iron frame(Angle iron frame measured and paid separetaly) complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8 mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel framed work such as grills, gratings, manhole's cover etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc. conforming to Fe-290 Gde E-165, complete all as specified and directed.

Material and labour for PCC 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in surface channel and drains, complete all as specified.

Material and labour for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified.

Material and labour for providing 25mm thick precast cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) set in cement mortor 1:4 for louvres and jallies, including all mouldings and demolition of old jallies complete all as specified & directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified & directed.

Material & labour for 75mm thick Cement concrete type (1:4:8) type D-2 (using 40mm graded aggregate) as in sub base/base of floor complete all as specified & directed.

Material & labour for Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) including 50mm thick sand cushioning under floors or in foundations including watering and consolidation, complete all as specified & directed.

Material & labour for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, benching, rounded or chamfered on edges, complete all as specified & directed.

Excavation in trenches not exc. 1.5m wide for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing excavated materials to a distance not exc. 50 mtr and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Material and labour for concrete bed to drain pipes including haunching against the side of the pipe and forming cradles after they are laid and tested in cement concrete 1:3:6, type C2 for 150mm bore, complete all as specified and directed.

Supply and laying 150mm dia Non Pressure NP-2 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete all as specifed & directed.

Supply and fixing of pre-laminated 18 mm thick lead free factory made 100% Solid WPC (Wood Polymer composite) sheet having high natural fiber contains 25 to 30 % wood colour sheet with density not less than 600 kg /Cbm bent 90°and the weight of sheet of 1 sqm should be 11 kg(+/- 5%) manu facture by ISO-9001-2015 certified company, the sheet should be 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specifed and directed.

Supply and fixing of Stainless steel auto, 9.5o crank hinges, fancy type (as per sample) with concealed pattern fitted to shutters complete all as specified and directed.

Supply and fixing of 100 mm size stainless steel brignt finish handle as approved by GE, fixed with Nut and bolt complete all as specified.

Supply and fixing of Magnetic ball catcher for cupboard shutter of approved pattern fitted with suitable screws complete all as specified and directed.

Supply and fixing in repair MS lock (six brass levers, duplicate keys) for steel shutter of inbuilt cupboard/almira of approved sample by GE fitted with suitable screws after reapir of existing lock system in the shutter complete all as specified.

Supply and fixing in repair continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 30 mm all as specified and directed.

Supply and fixing in repair 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

Taking down carefully point wiring with copper/aluminium conductor for light, fan, socket or power including fittings such as switches, sockets, light fitting any type, holders, (batten type and pendent), ceiling rose, wooden boards, shades any type and making good disturbed surfaces, complete all as specified & directed.

Material and labour for Point wiring using FRLSH PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.5 mm thick including all fittings viz tees, bend, junction box and modular metal flush sunken box 1.2 mm thick with suitable support frame and cover plate (inner/outer) of required modules for mounting switches, sockets, fan regulators , connecting earth for light/fan/bell point including cutting chases in walls and making good to disturbed surface complete all as specified and directed . (Note : Switch/bell push/fan regulator shall be measured and paid separately)

All as per Srl item No. 126 above but for one light point controlled by two switch 10 Amp, SP, two way, complete all as specified and directed.

All as per Srl item No. 126 above but for 5 pin 5 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 126 above but for 5 pin 5 Amp socket outlet point on independent board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 126 above but for one 15Amp socket outlet point concealed using 2.5Sqmm FRLSH PVC insulated multi-strand copper conductor wire including 2.5Sqmm FRLSH PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply & fixing Socket outlet, 2 in 1, 5 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.

Supply & fixing Socket outlet 2 in 1, 3 pin, 5 & 15Amp, flush type, AC 230 volts etc complete, all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 15 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply and fixing Fan regulator (0-5 step type) suitable for 1200mm sweep ceiling fan hum free, 120W including necessary connections complete all as specified and directed.

Supply and fixing switch piano two way 6 Amp, 240 volts, complete all as specified and directed.

Supply and fixing Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed.

Supply and fixing Lamp holder, insulated body, with back plate for batten fittings including 12W LED lamp, complete all as specified and directed.

Supply and fixing of 20W surface/wall mounted box type batten LED luminaire, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 120 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing of box type 10 Watt LED 2 feet length as mirror light, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing Energy saving, surface mounted bulk head luminaire 10W made of pressure die cast aluminium housing & polycarbonate diffuser with IP 65 protection in house driver and luminous efficacy > 100 lumens/Watt, PF > 0.90 with colour temperature (CCT) > 5700 + 300K, complete including connecting up with suitable size flexible copper conductor cable complete all as specified and directed.

Supply and fixing surface mounted rimless 18 watt LED round panel with polycarbonate housing and white coloured flat acrylic cover with inhouse driver and efficacy > 100 lumens/Watt, PF > 0.90 with colour temperature (CCT) > 5700 + 300K, complete including connecting up with suitable size flexible copper conductor cable complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door VTPN MCB DB 4 way 415 V AC, 50 Hz with IP 43 and IK 09 protection having fully insulated copper busbar of rating not less than 250Amps, insulated neutral bar, earth bar and cable ties for cable management and polyuthrene gasket including MCCB 63 Amps 4 Pole, 16 kA fixed thermal and fixed magnetic setting and flush mounting into the wall and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door MCB distribution board Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management and polyuthrene gasket and flush mounting into the wall and making good the disturbed wall surfaces to match with existing specification including taking out old DB, complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door MCB distribution board Single pole & neutral 240 volts 6 way with IP-43 IK-09 protection having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management and polyuthrene gasket and flush mounting into the wall and making good the disturbed wall surfaces to match with existing specification including taking out old DB, complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door MCB distribution board Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management and polyuthrene gasket and flush mounting into the wall and making good the disturbed wall surfaces to match with existing specification including taking out old DB, complete all as specified and directed.

Supply and fixing in replacement MCB single pole (SP) 240 volts, , 50Hz, 6 to 32 Amps, 10KA (B-series) complete all as specified and directed.

Supply and fixing in replacement MCB single pole (SP) 240 volts, , 50Hz, 32 Amps, 10KA (C-series) complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLSH, PVC insulated, multistranded, unsheathed copper conductor cable of size 06 Sqmm 1100 V drawing through & including not less than 25mm dia of non metallic PVC rigid conduit concealed in wall including one run of earth continuity conductor of size 06 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 V including connecting to main board complete all as specified and as directed. Note: Two run of submain wire (phase and neutral) and one run of earth including PVC conduit and accessories will be measured as one run.

Supply, laying, jointing and testing LT underground cables XLPE insulated screened PVC bedded galvanized steel strips armoured electric power cable (heavy duty) with aluminium conductor LT grade 1100 volts grade and cross section area 25 sqmm 4 core conforming to latest IS and laid in trenches or fixed to wall/pole or passing through pipe complete with cable lugs, glands etc all as directed. Note: Excavation, earth work, sand cushioning and brick protection to be measured and paid for separately.

Material & Labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed. Note: punned thickness shall be measured and paid.

Material & Labour for cover to underground cable with one layer of bricks using sub class ‘B’ bricks (Old size) laid flat across the cable complete all as specified. Note:Excavation and earth work measured separately.

Material & Labour for galvanised iron tubes 40 mm bore, light grade for protection of cable under road crossing fixed to wall or pole including 2 nos of FI clamps of suitable size with nuts and bolts and taking out of old GI tubing complete all as specified and directed.

Supply and fixing of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps with breaking cap 10kA, complete all as specified and directed.

Material & labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by 4 mm dia GI wire as earth lead by means of nuts and bolt, thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, with fair finish, internal dimension of chamber shall be 300x 300 mm ,15 mm thick plaster in CM 1:4, funnel with wire guage mesh, CI frame with 10 mm thick hinged CI cover with flush type lifting handle at ground level, alternate layer of charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part -1 (2009) and specified including provision of GI strip upto 7.5 metre protected by 15 mm dia light grade pipe and watering pipe shall be 20 mm bore medium grade, excavation, earth work and connecting the earthing to an earthing test point main switch board all as specified and testing complete all as specified and directed. by Engr-In-Charge. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be re-done at no extra cost.

Fixing only serviceable tube light fittings any type retrieved under item No 125 in same or other location including connecting up with suitable size flexible copper conductor cable, complete all as specified and as directed.

v k engineers and builders