Providing Concrete Flooring Around Hangar 12 and 13 at LCA Tejas Division, Plant II HAL BC

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

PAN No.:

Service Tax Registration No.

Goods and service Tax ID No.

Contact Details

Registered Contractor

Related Document to be uploaded to HAL e Portal.

I.T Returns for past 03 Years (Assessment Years)

Related Document to be uploaded to HAL e Portal.

Average Annual Financial Turnover during the last 3 years, ending 31st March 2026 of the previous financial year[should not be less than 30% of Amount put to tender]

TURNOVER IN Rs.

Audited Report duly certified by the Auditor to be enclosed to support the Turnover.

ESI & PF Nos. with proof

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Related Document to be uploaded to HAL e Portal.

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Type of work: [Incase of private works the same shall be supported with TDS certifcate]

Please Enter Details for Work No I.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III.

Details of person holding the Power of Attorney ( if different from the contact person)

Related Document to be uploaded to HAL e Portal.

Documents Need to Uploaded

Related Document to be uploaded to HAL e Portal.

DECLARATION I

DECLARATION II

Related Document to be uploaded to HAL e Portal.

DESCRIPTION

Earth work in surface excavation in all kinds of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth along with vegatation if any upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Providing, mixing and laying in position cement concrete (1:3:6) derived from natural sources of required thickness using 20mm down graded hard stone/granite aggregate in accordance with IS 456 in all works up to plinth level and in Flooring including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc, all complete as directed by the Engineer-in-Charge.

Providing and laying in Position Ready Mix Concrete (RMC) in the proportion 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) reinforcement concrete works, of required thickness in accordance with IS 456 in foundations, mass concrete, sub bases, floors, pavings and other similar works including necessary formwork, mechanicalmixing, transporting, vibrating, consolidation, levelling,curing, dewatering if any, all materials, labour, lead & lift, tools,plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc.,excluding the cost of centering, shuttering, all complete as directed by the Engineer-in-Charge.

Providing centering and shuttering for the footings, foundations, bases of columns, pedestal, mass concrete, RCC members including strutting, propping, etc. with timber, wooden planks, runners / M.S. sheets with all supports, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works upto plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge.

Demolishing cement concrete of nominal mix 1:3:6 or richer mix (including equivalent design mix) any thickness, manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Demolishing brick work / block work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Total (Exclusive of GST)

Percentage above or below for total value on Sl.No. 8

Total amount after Percentage Sl.No. 8 + Sl.No. 9

GST @ 18% for total value on Sl.No. 10

Total amount (Inclusive of GST) Sl.No. 10 + Sl.No. 11