Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹40.3 L
EMD Value
₹80,500
Closing Date
20 Nov 2023, 12:00 pmClosed
Director, GSO, NRB, BARC(T)
Director, GSO, NRB, BARC(T)
Electrification in renovated rooms at TTA Guest House, Tennis Court lighting, Provision of landscape lighting and associated cabling work in Type-E Bungalows in BARC Staff colony, Tarapur.
2023_NRB_778569_1
BARCT/NRB/GSO/EMT171/2023/487
Open Tender
Electrical Works
Works
365 days
BARC STAFF COLONY, TARAPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹80,500
16 Jan 2024
2 Nov 2023
21 Nov 2023
2 Nov 2023
20 Nov 2023
13 Nov 2023
Amount
Removal of complete concealed/surface switch boards, Holders, Celling rose, Celling Fans and other electrical fittings in VIP Room of TTA guest house in BARC Staff Colony, Tarapur. Civil work required if any for removal / refixing of concealed box is in scope of the contractor. Total nos. of VIP Rooms - 6 Nos. & Dining room - 01 No. Total nos. of Room - 07Nos.
MCB's /RCCB/RCBO Supply installation, testing and commissioning of MCB's /RCCB /RCBO of following ratings installed in the existing DB.
32A , 2 pole RCBO(30mA) LEGRAND cat no. 411326 or equivalent make.
6-20A SP MCB LEGRAND cat no. 408593 or equivalent make.
Supply, installation and Guarantee of 1.1KV grade, FRLS PVC insulated wire of following size and laying through casing caping or pulling through conduit pipe safely with out any joint in wire. All wires should be confirm IS:694 with latest amendments. (Red/Yellow/Blue, Black, Green colour)
Supply and Guarantee of 1.5 mm², flexible Multistrand single core copper wire
Installation
Supply and Guarantee of 2.5 mm², flexible Multistrand single core copper wire
Installation
Supply and Guarantee of 4 mm², flexible Multistrand single core copper wire
Installation
Wiring for Internet Supply, testing and commissioning of of CAT-6 cable including termination at both ends i.e. one end in Rack panel and other end in UTP CAT-6 module type connector
Installation
Switch boxes Supply and fixing of Decorative Modular Concealed type switch boxes with cover plate of CRABTREE or equivalent make of following sizes for installation of switches/sockets/telephone sockets/data point etc. in VIP Room of TTA guest house in BARC Staff Colony, Tarapur.
12 module Flush Metal GI Box cat no. ACTXMIIX12, Inner Plate cat no. ACNPGOLV12 with Outer Plate cat no. ACNPSIKV12
6 module Flush Metal GI Box cat no.ACTXMIIX06, Inner Plate cat no. ACNPGOLV06 Glittery Sand with Outer Plate cat no. ACNPSIKV04
4 module Flush Metal GI Box cat no.ACTXMIIX04, Inner Plate cat no. cat no. ACNPGOLV04 with Outer Plate cat no. ACNPSIKV04.
3 module Flush Metal GI Box cat no.ACTXMIIX03, inner Plate cat no. ACNPGOLV03 with Outer Plate cat no. ACNPSIKV03
2 module Flush Metal GI Box cat no ACTXMIIX01, Inner Plate cat no. ACNPGOLV02 with Outer Plate cat no.ACNPSIKV02 or equivalent.
1 module Flush Metal GI Box cat no ACTXMIIX01 with Inner Plate cat no.ACNPGOLV01 with Outer Plate cat no.ACNPSIKV02 or equivalent.
Controlling switch & sockets Supply, Installation, testing and commissioning of electrical control switche/socket/telephone sockets/data point etc. CRABTREE or equivalent make of following rating on above Switch boxes in VIP Room of TTA guest house in BARC Staff Colony, Tarapur.
16 A One Way switch with Indicator Crabtree cat no. ACASXIB161 or equivalent make.
10 A/16 A Shuttered Socket (Heavy Duty) cat no.ACNKCXG253 or equivalent make.
10 A One Way Switch cat no.ACASXXB101 or equivalent make.
6 A 3 Pin Shuttered Socket with ISI marking cat no. ACNKPXG063 or equivalent make.
Telephone Socket with shutter (RJ 11) -1M cat no.ACNKRXG112 or equivalent make.
10 A One Way Bell Push Switch cat no. ACASBXB101 or equivalent make.
Blank Plate -1M cat no. ACNPLBGV01 or equivalent make.
TV Socket -1M cat no.ACNKRXG112 or equivalent make.
Information socket Information socket category 6-UTP 1- module equivalent to code no.ACNKMXG451
20 A SP C MCB cat no. DCNNCSPA02000MR or equivalent make.
20A SP MCB & 2 pin & E Socket with box Legrand cat no. 5078 11 or equivalent make.
30A electronic key tag senser based 2M cat no. Crabtree ACNSEIG000 or equivalent make.
Electronic chim Suppy and fixing of 2M Electronic chim Crabtree cat no. ACNCEEG060 or equivelent.
Lighting Fixtures Supply Installation , testing and commissioning of following lighting fixtures with all control accessories including interconnection from existing boxes.
22 Watt LED Recess mounting LED downlighter fitting along with driver unit. Phillips Duraslim or equivelent make
Decorative Phillips Desklight 4.5 watt, Model No.- 61013 or equivelent make.
Decorative Wall Light Decorative, wall mounting, SS finish fixture with textured glass diffuser with 40 W mini GLS lamp. Model No.- Havells LHJE04104499 or equivelent make.
LED Spotlight 2W Warm Day Light Model No.- Havells LHEEBCPBUH1 1W002 or equivelent make.
Mirror LED Wall Lights 11 watt Phillips Model No.- 31167 or equivelent make.
12 Watt LED Recess mounting LED downlight fittings Phillips skyglow or equivelent make.
Supply Installation ,Testing and commissioning of Instrument Rack of Size 6U Height x 19 inch standard (fully loaded)
Supply and installation ofRJ 45 connectors with plastic cap
Supply Installation ,testing and commissioning of 28 port Managed Layer 2 POE switches. D-Link or equivelent make.
Supply, installation , testing and commissioning of CAT 6 U/ UTP cat 6 patch panel D-Link or equivelent make.
Supply, installation, Testing, and Commisioning of ports Web Managed No. Layer 2 Access Switch. D-Link or equivelent make.
Decorative 1200mm BLDC Ceiling Fans : Supply Installation, testing and commissioning of 1200mm sweep, BLDC ceiling fan with remote to be installed on exsisting fan hook operate on 140-285V , 50Hz, AC supply, conforming to relavent IS as per tender specification. Studio + Ceiling Fan in VIP Room of TTA guest house in BARC Staff Colony, Tarapur. Atomberg Studio+ ceiling Fan or equivalent make.
Exhaust Fan : Supply Installation, testing and commissioning of 150mm sweep, High speed, PVC body, Automatic operated shutter Exhaust fan operate on 230V , 50Hz, AC supply, conforming to relavent IS. in VIP Room of TTA guest house in BARC Staff Colony, Tarapur. Atomberg Studio+ Exhaust Fan or equivalent make.
Electric Geyser Supply, installation, testing and commissioning of 1 ltr, instantaneous type 4.5kW Geyser, including supply and installation interconnection pipe with 24-Inch long Stainless steel 304 Braided Pipe in VIP Room of TTA guest house in BARC Staff Colony, Tarapur. Havells INSTANIO or equivelent make.
Air Conditioner Unit :- Supply, Installtion , Testing & Commissioning of split type air conditioner of 1.5 TR , fixed speed 3 star rating with all required accessories such as rigid PVC hose, suitable size Copper tube, insulation, cover tape, bracket for fixing outdoor unit etc. with its Remote Control unit. Blue Star DCUHD or equivelent make.
Supply, Installtion , Testing & gaurantee of Standing Garment Steamer, 2000watt, 230volt AC with Tiltable Styleboard - 3000 Series Philips STE3160/30 or equivelent make.
Supply, Installtion , Testing & gaurantee of UV +Active copper+ water purifier with advanced technologies & Stainless Steel equipped with a storage tank made of high grade 304 stainless steel. Aquaguard Eden or equivelent make.
PVC Conduit Supply, Installation of medium class PVC conduit of 25mm size for ceiling/wall/column with all accessories like coupler, bend junction boxes. Civil work requiered for installation of conduit pipe is in scope of the contractors.
Supply, Installation,Testing, Commisioning and Gurantee of 1.1KV LT Power Cable .
Supply of LT Cable : 1.1 KV 1.5 Sqmm x 2 core Power Cable Stranded Copper conductor, XLPE insulated, PVC sheathed, Galvanised Steel Round wire Armoured as per IS 7098 and as per specification given in the tender. The total length of the cable should be marked with / have embossing of size, voltage grade, make and length on every one meter length of the cable.
Supply of LT Cable : 4 core, 16 sq. mm, 1.1 KV Power Cable Stranded Aluminum conductor, XLPE insulated, PVC "ST-2" inner sheathed (extruded) Galvanised Steel Round wire Armoured and overall PVC "ST-2" extruded sheathed as per IS 7098 and as per specification given in the tender. The total length of the cable should be marked with / have embossing of size, voltage grade, make and length on every one meter length of the cable. The cable should be supplied in a non returnable steel drum in one length the full quantity.
Laying of 1.1KV LT Cable through HDPE Pipe: Laying of 1.1 KV, 1.5sqmm x 2 core armoured LT Cable, Copper conductor, XLPE insulated, PVC sheathed, Armoured cable at a depth of 500 mm below the ground level including Excavation of trench of size 400 x 500 mm in all types of soils, laying the cable through 40mm HDPE pipe and backfilling the trench and removing the excess earth including supply of HDPE pipe(PN 6) and as directed by Engineer-in-Charge(Elec) E.M.C. (1) Excavation of Trench of size 400 x 500 mm for 1 meter
Laying of LT cable through trench : Laying of LT cable 1.1 KV grade XLPE insulated, Aluminum conductor at a depth of 900 mm below the ground level, covering the same with sand and baked bricks at both sides of the cable and top, as directed by Engineer-in-Charge. Excavation of Trench of size 900mm x 500 mm for 1 meter
End termination of LT cable: Supply and making end termination of 1.1 KV, 1.5sqmm x 2 core armoured LT Cable, Copper conductor, XLPE insulated, PVC sheathed (extruded) G.I. round wire armoured 1.1. KV grade cable with brass Cable gland mounted on suitable size GI Plate and pin type copper lugs. work should be done as directed by EIC.
Supplying and making end termination with brass compression gland and aluminium lugs for 4 core, 16 sq. mmof PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supply, installation testing and commissioning of small Garden light pole (Bolard ) at Type E banglow - 150 Nos.
Supply of small Garden light pole (Bolard ) at Type E banglow - 150 Nos. as per the following specifications : 1) Rated voltage, - 230 v, 50 Hz, wattage - 8w 2) Input operating - 140 to 270 volts AC at 50 Hz ± 2 with auto cut off below 120V 3) Protection - Over voltage and short circuit 4) Height of pole - 0.86 M Make- Phillips Robin post model no. 15473/30/16 or equivelent make.
Installation of Garden light pole (Bolard ) Installation of Garden light pole (Bolard ) by making Pedstal of size 300 x 300 x 600 mm of PCC of 1:2:4. All accessories required for fixing of pole is in scope of the contractor.
Supply, Installation, Testing, Commisioning and Gurantee of Lighting Poles for lawn tennise: Street light Pole 10 Mtr Height : Fabrication, Supply, Installation, Testing, Commissioning of GI Octagonal shape Lighting Poles as follows : Total height of the pole is 10 M from basement and the pole should be of octagonal shape made of single sheet by folding the sheet in octagonal shape of 3 mm thick, Bottom dia.-175 mm, Top dia.-70 mm, thickness of Galvanising should be 80 Micron for pole and 110 Micron for base plate. The termination box should be of concealed type for termination. The pole should be pre-wired with 1.5 Sq.mm, 3 core, flexible copper conductor PVC insulated cable, 6 Amp Single pole MCB for each lighting fixture. The pole should have Ring type/ISM bracket suitable to mount 4 Nos (Two front and two back side) LED Flood Lights of 200 Watt. The hot dip galvanized pole should be fitted on the basement and the pole should be easily removable type. Foundation for the pole should be done by doing excavation of trench of suitable size, RCC for foundation of size 1800mm x 500mm x 500mm for pole with 1:2:4 mixture of concrete. Base plate of pole should be of dimension 275x 275 x 16 mm thick. The pole should be earthed with 2 Nos. 8 SWG copper wire. Other detailed specification are given in Annexure.Lighting Pole Make : Bajaj cat no.BOP-1030/ or equivelent make.
Supply, Installation, Testing, Commisioning and Gurantee of LED Fittings for lawn tennise: LED Flood Light : SITC and Guarantee of 200 watt LED Flood light, with control gear, secondary optics lenses and housing made out of pressure die casting with heat sink and aluminium extrusion with IP-66. Make : Philips BVP184LED196CWFGWB 200W PSU or equivelent make.
Supply
Installation
SITC and Guarantee of outdoor stand mounted IP65 Encloser with 63A TPN MCB incomer, Analog time switch, 25A TP contactor for the automatic switching of luminaries, 2 no ON/OFF push button with weatherproof box mounted on the stand suitable for entry of 04 nos. armoured cable of size 16 mm² Incoming 25sq.mm and 2 nos. outgoing 16 sq.mm terminals.
POZITRON ENGINEERING SYSTEMS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .