SPECIAL REPAIR TO BUILDING NO P-07 AT AF STATION

Amount

Taking down chowkhats with shutters (without taking off shutters from the frames) & removing from site area n.exc 1.5 Sqm each complete all as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engineer-In-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 40 mm to 50 mm dia

Demolition of reinforced cement concrete of any description and in any position complete all as specified.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of Precast concrete block/ Brickwork or stone/boulder masonry, laid with cement morter complete all as directed.

Material and labour for providing cement concrete type B0, 1:2:4 (12.50mm graded aggregate), in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified

Material and labour for 75 mm thick PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregates as in sub base, sub floor, paving, plinth protection laid to slope 1:12 and finished the surface even and smooth without using extra cement complete all as specified.

Material and labour for 25 mm thick cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregates as in floors and finished the surface even and fair complete all as specified.

Material and labour for Precast cement concrete block masonry with solid block type C1,1:3:6 using 20 mm graded crushed stone aggregates exc. 10 cm in width and getting in cement mortar 1:4 complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410W Grade E-250 (quality A) complete all as specified.

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410W Grade E-250 (quality A) complete all as specified.

Material and labour for anodised aluminium door and chowkhats made out of hollow extruded aluminium section as mentioned below. Each door shall be provided with 02 Nos disc or D type aluminium handles, 02 Nos aluminium tower bolts 200 mm long, one brass mortice lock of six levers with key in duplicate and shall be regulated by provided double action hydraulic floor door spring/hydraulic door closer. Shutter to be partly glazed with and including 5 mm thick tinted glass and partly panelled with and including 12 mm thick prelaminated particle board with decorative laminations on both sides, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. (a) Chowkhat/frame : 101.6 mm x 44.45 mm x 1.5mm thick (b) Shutter top and bottom rail : 114.3 mm x 44.45 mm x 1.5 mm thick (c) Shutter middle rail : 83.5 mm x 44.45 mm x 1.5 mm thick (d) Shutter vertical/style : 83.5 mm x 44.45 mm x 1.5 mm thick MAKE : (i) Anodised aluminium section : JINDAL/ HINDALCO/ INDALCO (ii) PARTICLE BOARD : NOVAPAN/ KITPLY/ BHUTAN BOARD (iii) Glass : Saint Gobin/ Modi Guard/ TATA.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix as in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified.

Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 75 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 150 mm long aluminium alloy handles, fabricated type, anodized all as specified.

Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer and 1 mm thick wall care putty complete all as specified.

Material and labour for complete removal of existing wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified.

Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces. Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression)

Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.

Material and labour for old painted steel surfaces of any description over 10 cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified.

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 450 mm x 350 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco

Material and labour for 10 mm thick joint free premium quality light shed vitrified ceramic tiles area of each tiles shall be exceeded 0.42 sqm but not exceeded 1.00 sqm as in floors set and jointed and pointed in white or colour cement to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco

Material and labour for 3.50 mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-In-Charge. Note: Sample of the material shall got approved after physical verifiaction of GE

Material and labour for 3.50 mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, as in skirting / dado with approved adhesive including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engineer-In-Charge. Note: Sample of the material shall got approved after physical verifiaction of GE

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exceeding 20 cm girth complete all as specified.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong

Supply and fix as in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. Make: Prayag Polymer Pvt. Ltd./ Saint Gobain/ Modiguard/ Jaquar & Company Private Limited./ Cera

Supply and fix as in repairs Vitreous China wash basin, white, flat back, size 550 mm x 400 mm including 32 mm dia waste fittings and waste pipe including brackets complete all as specified. Make Johnshon / Jaquar / Cera/ Parryware

Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified. Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff

Supply and fix as in in repairs 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. Note: Make shall be provided as per existing one.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 40 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply and fix as in repairs 20 mm dia chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103

Supply and fix as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified. Make:- Kohler/ Jaquar/ Cera/ Hindware

Supply and fix as in repairs corner glass shelf of size 300 mm radius (with brass chromium plated brackets) fixed in wall with necessary screws etc. complete all as per directed by Engineer-In-Charge. Make: Prayag/ Parryware/ Commander/ Polytuff

Supply and fix as in repairs for 15 mm bore dia of pipe Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as per manufacturer instruction. Make:- Parryware Cat No G3317A1/ Jaquar Cat No CQT-23281UPR/ Johnson Cat No T6023C

Supply and fix as in repairs brass CP shower rose with or without swivel joints, 125 mm size, including fixing to steel pipe or union complete all as specified. Make:- Jaquar / Parryware / Marc/ Cera/ Johnson

Supply and fix as in repairs, 15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030

Supply and fix as in repairs 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction. Make:- Jaquar Cat No FON-40053/ Johnson Cat No T3410C/ Cera Cat No F2008201

Supply and fix as in repairs 15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- Parryware Cat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C

Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 500 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified including dismantling the old unserviceable one. Make:Sintex/ Astral/ Finolex/ Supreme

Supply and fix Vitreous China one piece wash down water closet pan floor mounted, white including fixing bolts, 10 ltr capacity flushing cistern,flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including 'P' or 'S' trap including taking out old pedestal alongwith existing all fittings and making the surface match with existing surface complete all as per manufacturer instruction. Make of Pan Parryware Verve AM / Cera CAMPBELL/ Johnshon COSMO

Supply and fix as in repairs CP health faucet with tube and wall hook including all fittings as per manufacturer instruction. Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C

Supply and fix as in repairs for 15 mm dia cast copper alloy chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as Per manufacturer instruction. Make :- Parryware Cat No G2381A1/ Cera Cat No F1016163/ Johnson Cat No T3370C

Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW

Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instruction Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW

Material and labour for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. Make: KISAN/ PRINCE/ SUPREME

Supply and fix as in repairs 125/110 mm dia PVC (SWR) gully trap, plain with gratings including jointing with solvent cement complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast

Supply and fix as in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast Note: Quoted rate is deemed to be included for necessary door Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix as in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast Note: Quoted rate is deemed to be included for necessary door Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix as in repairs 75mm dia PVC (SWR) vent cowl complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast

Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade set and joined in cement slurry and pointed in grey cement and no pigment including 25 mm thick sand cushioning complete all as specified. Make: Anjali Tiles/ Ultra Tiles Pvt Ltd/ Terra Firma/ Bansal/ Mehtab Tiles/ Nitco

Material and labour for 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates complete all as specified.

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete, including fittings such as switches,ceiling roses,pendants,regulators sockets etc.,removing from site and making good disturbed surfaces of walls,floors,ceiling etc.,all as directed

Taking down carefully submain wiring, making good without disturbing existing surface.

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

All as per Item No 79.00 but One 3 pin socket outlet. 15 amps, independent, with cables 2.50 sq. mm size complete all as specified.

Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs, Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified. Make: Bajaj/ Crompton Greaves/ Sudhir/ Orient Electric/ Atlas/ Baliga/ Shyam

Supply and fix as in repairs switch socket outlet , 3 pin 6 Amps 240 V flush type . Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fixing as in replacement LED luminaire 600mm x 600mm square type 34 to 36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three flexible copper conductor cases of suitable size complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in repairs LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in repairs of Flameproof cum Waterproof LED Bulk Head light fitting of 40 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Bajaj/ Crompton Greaves/ Sudhir/ Orient Electric/ Atlas/ Baliga/ Shyam Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 6.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and fix as in replacement sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 8 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in replacement sheet metal enclosure MCCB DB TPN with 160 Amp rated bus bar 4 way 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in repair MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in replacement MCCB, adjustable type thermal magnetic release type,3 poles, 415 Volts, Ics = 100% Icu, Lcu = 16 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix exhaust fan, steel body AC single Phase, BEE 5 star rating, 230V of size 300m sweep with, blades, and frame and louvers complete all as specified. Make: Almonard (ISI Marked) / Usha (ISI Marked) / Orient (ISI Marked)/ Bajaj (ISI Marked)/ Havells (ISI Marked) / Crompton Greaves (ISI Marked)

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick,buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel, earth strip protected by and including GI Pipe 40 mm dia bore(light grade) and connected to main test point as directed and including Concrete Pit in PCC (1:3:6) type C1 precast RCC (1:1.5:3) type A1 cover slab 54 X 54 X 5 Cm reinforced with 8mm dia TMT bars@150mmC/C both ways with one handle for lifting made of 8mm dia TMT bar embeded in precast cover slab,funnel,wire mesh , 20 mm bore GI Pipe (medium grade) for watering charcoal and salt in alternate layers, incl necessary excavation and earth work in any type of soil complete all as shown on electrical plate no 3 of SSR part I complete all as specified.

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 70 Sqmm 3.5 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ KEI (ISI Marked)/ Gloster (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out soft/loose soil complete all as specified.

Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point all as specified.

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.

Supply, lay and fix 50 mm bore galvanized iron tubing (light grade) including all fittings and laid in trenches, walls and ceilings or laid in floors complete all as specified and directed. Make:- Jindal/ TATA/ Prakash Note: Excavation shall be measured and paid in separate item

M/S RAGHU NATH SAH

kapoor and co