Tender NO. BARC_TSD_19_2023_24

Amount

Fabrication, supply, installation, testing and commissioning of 22G (0.8mm) GI ducting with 25 mm thick internal acoustic lining as per tender specifications.

Supply & installation of acoustic lining from inside in existing duct as per tender specifications. Dismantling of duct and false ceiling etc and its reinstallation is in scope of this item only.

Supply, installation, testing and commissioning of Chilled water GI piping of NB 50 mm, Class C along-with 38 mm thick closed cell nitrile rubber insulation having covering material of double layer laminate of aluminium, coated with a special UV protection and PVC backing as per tender specifications.

Supply, installation, testing and commissioning of 2.0 TR capacity Fan coil Units along with Y strainer & solenoid isolation valve as per tender specifications.

Supply, installation, testing and commissioning of Condensate drain piping of dia 25mm PVC braided pipe with 19mm insulation sleeve along with monsoon tape as per tender specifications.

SITC of 50 mm HDPE pipe for condenset drain of FCU as per tender specifications.

Shifting & reinstalling of FCU in same room from one wall to another wall with required necessary copper tubing, insulation, wall cutting & refilling, etc. as per tender specifications.

Supply and installation of Filters of following type & sizes in AHUs, etc. with required hardwares gaskets etc. as per site after removing existing filters as per tender specifications

Pre filter (Synthetic media), Box type (EU-4), 610x610x50

Pre filter (Synthetic media), Box type (EU-4), 305x610x50

Pre filter (Synthetic media), Box type (EU-4), 500x500x50

Fine filter (Synthetic media) Flange type (EU-5), 610x610x305

Fine filter (Synthetic media) Flange type (EU-5), 305x610x305

Pre filter (Synthetic media), Flange type (EU-4), 760x305x50

Hepa filter (Glass fibre), Box type (H-13), 760x610x75

Supply & installation of 100 mm dia. dial type pressure gauges with suitable siphon & cocks. The range of pressure gauge shall be 0 to 10 bar as per tender specifications. (Application: Water pipe)

Supply & installation of 100 mm dia. dial type compound pressure gauges with suitable siphon & cocks. The range of pressure gauge shall be (-) 1 to (+) 2 bar as per tender specifications. (Location: Cooling water Pump suction, Application: Water pipe)

Supply, installation, testing and commissioning of Dial type temperature gauges (0 to 50 Deg C) as per tender specifications

Supply and installation of UV tube lights in AHUs and UV chambers by replacing existing lights of following details with same/similar UV lights and repairing necessary wiring to make it operational as required as per tender specifications and instruction of EIC.

UVL 775 AHNU WH-5 ≈1550 mm long

UVL 424 AHNU WH-5 ≈ 850 mm long

UVL 597AHNU WH-5 ≈ 1200 mm long

GH0 609 T5L S004 A0020 ≈ 450 mm long

GH0 609 T5L S004 A0020 ≈ 620 mm long

UVL 305 AHNU S004 A023 ≈ 600 mm long

Supply, fabrication and installation of GI Support structure, racks, by welding & GI/SS nutbolts, anchors, etc. as per tender specifications.

Supply, installation, testing and commissioning of PVC flexible connection for AHU fans and exhaust air blowers as per tender specifications.

Supply and installation of 19mm thick Nitrile rubber insulation with company bonded glass cloth cladding with proper recommended (rubber based) adhesive at existing ducts as per tender specifications.

Supply and installation of 19mm thick closed cell nitrile rubber insulation having covering material of double layer laminate of aluminium, coated with a special UV protection and PVC backing as per tender specifications.

Supply, installation, testing and commissioning of ANUBAR suitable for following parameter and as per tender specifications.

flow 19248 cfm, Duct Size 1000 x 600 mm

flow 6900 cfm, Duct Size 1400 x 1000 mm

flow 5800 cfm, Duct Size 800 x 400 mm

flow 4800 cfm, Duct Size 1000 x 400 mm

flow 7000 cfm, Duct Size 700 x 700 mm

Supply, Installation, testing and commissioning of Propeller type Exhaust air fans Ø300, 900rpm asper tender specifications.

Repair of existing motorised gate valve of DN 200 size by replacing the existing faulty actuator with new one and as per tender specifications.

SITC of RTD temperature sensor with digital display as per tender specifications.

Calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 200 mm in water pipe line as per tender specifications.

Calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 125 mm in water pipe line as per tender specifications.

Calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 100 mm in water pipe line as per tender specifications.

Calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 80 mm in water pipe line as per tender specifications.

Repair and calibration of existing ABB make Electromagnetic flow meters of DN 150 mm in water pipe line as per tender specifications.

Repair and calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 125 mm in water pipe line as per tender specifications.

Repair and calibration of existing Adept Fluidyne make Electromagnetic flow meters of DN 80 mm in water pipe line as per tender specifications.

Supply and installation of isolation dampers of following sizes and as per tender specifications.

Painting of MS pipeline/supports of various sizes, chilled water pipeline of varies sizes etc. with two coat of primer & two coats of synthetic enamel paint of approved colour as per tender specifications.