Renovation of old student residence (SR-01 to SR-04) block washroom at IIM Indore.

Amount

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge INTERNAL WORK - EXPOSED ON WALL

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

2532 (32 mm OD) pipe

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore

25 mm nominal bore

Providing and fixing & painting, uPVC pipes6Kg/cm2 (IS: 4985) including all fittings (plain or door) to perform the job e.g. bends, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including cutting chase or holes in walls floors and making good where required. inclusive of clamps/clips for fixing (for rain water pipe,waste pipes, ASP pipe & other required locations as directed and at inside or outside the building) all complete job and as per the Engineer-in-charge :

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

Providing and fixing Urinal Hindware make of model Venenzia standard CAT no. 60012 or equivalent consists of concealed water spray holes which makes the process of flushing easy, high durability, scratch resistant with angular stop cock with flange of CAT No. SOL-6053 of Jaguar or equivalent make including all requisite fittings, C.P. brass waste coupling, Bottle trap, spreader and brackets, cutting/core cutting and making good the openings wherever required all complete job & as per the direction of Engineer-in-Charge.

Providing & Fixing of Counter Top wash basin of Jaquar make (model no. JDS-WHT-25909) or equivalent with required waste coupling (Model no. ALD-729L130) or equivalent and bottle trap (model no. ALD-769L300*190) or equivalent etc. basin mixer of approved quality (having 450mm flexible hose for easy regulation of water flow and temperature, single hole installation, Casting:100% virgin Brass Ingots certified for 63% copper to ensure flawless casting Chrome Plating: Robotic electroplating for everlasting lustrous shine with Dimensions: 26x16x14cm Weight: 2kg) of CAT no OPP-CHR-15005BPM or equivalent make, including all requisite fittings, CP brass waste coupling, Bottle trap and brackets, cutting and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge.

Providing and fixing hand shower ( health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with N.R.V. (backflow preventer) of CAT No. T9961A1 of parryware or equvalent make , including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge

Providing and fixing 600 mm long single towel rail CAT no. AKP 3571P of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge

Providing and fixing shower basket large of CAT No. ACN-1179N of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer in charge.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, conneting legs & wall flanges of CAT No. SOL-6273UPR of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per direction of Engineer in charge.

Providing and fixing overhead shower 150x15 mm square shape single flow (body and face plate brass with chrome plated) with rubit cleaning system with shower arm 400x25x25 mm square shape with flanges of CAT No. OHS-1805 & SHA-455L400 of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the directionof Engineer-in-charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Dismantling W.C. Pan/urinal basin/ wash basin of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in?Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Above 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

Up to 150 mm diameter

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Supply & fixing of 300 ml manually operated wall mounted top push soap dispenser of Approved sample (Make/ Model: Dolphy DSDR0134 or equivalent) made up of ABS transparent/ semi?transparent plastic including necessary fixing arrangements etc. all complete as per the direction of Engineer-in-Charge.

Providing and fixing SWR Moulded / uPVC Nahani trap or Multifloor trap or other required type of trap with or without jali of required size self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors along with sealing joints (if any), wter proof grouting and providing due support/encasing as per requirement of site all complete job & as per the direction of Engineer-in-charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to 1S: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, wall/dado laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.

Area of slab upto 0.50 sqm

Area of slab Over 0.50 sqm

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

White Agaria Marble Stone

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing & fixing of SS 304 heavy duty Connection Pipe for washbasin/Hot and cold water/geyser Connection Pipe/Basin Mixer Connection Pipe,etc of required length with all necessary fittings complete as per the direction of Engineer In-charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 : 25 mm nominal bore with MTA & reducer complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing & Fixing of two way bib cock of Jaquar make (model no. ALI-CHR-85041) etc. all complete as per direction of Engineer-in-Charge

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Providing and fixing torsion spring plank ceiling system Hunter Douglas make of approved finish comprising of plank of 600mm wide and 1200 mm long manufactured out of 0.9mm thick aluminium alloy 3105 perforated 1.5 mm dia with 22% open area. The metal ceiling panels shall be downward accessible with a minimum of four torsion springs per panel. The plank willl be manufactured on advanced CAD/CAM equipment that includes several leveling stages in the manufacturing process. Torsion spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs. Planks will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four torsion per panel. The plank shall be polyester powder coated in design colour. All comlete as per drawing, specification and direction of Engineer in charge. All ceiling products shall adhere to Green Pro Certification. The metal ceiling is tested for seismic Zone V compliance as per IS 1893 part 1-2016

Main Runners: 24 mm deep, inverted Tee section, 3.6 long, with factory punched flanges to receive totsion spring assembly. Main Tee on centre spacing to match panel Length. Cross Runner: 24 mm deeo, inverted Tee section designed to interlock in to web of main tee section on designed spacing. Cross tee length to match panel length Cross tees are spaced spacing 1200 mm on center maximum. Suspention System: As per manufacturer standard considering type of plenum and its height. Paint finish: The panels will be trated in latest nano technology process and electro statically powder coated with automatic caronal syated and cured with gas catalystic technology. Acoustic Felt (optional): Non woven felt made of glass reinforced fiber glued over the perforation for sound absorpation. NRC 0.7 Approved make: Hunter Douglas, SASm Gordan

A) Supply and installation of Merino Besco TITAN or equivalent 12mm BOX UP series cubicles of width and depth as per specifications/site drawings/Site requirement Cubicle height to be 2100mm. B) Made from solid grade compact high-pressure laminate as per IS:2046 and EN 438 manufactured under high specific pressure > 5 MPa and temperature 120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. Doors: All doors will be of single colour and made of 12 mm thick Merino or equivalent HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Stainless steel made coat hook and stainless steel door knob are provided with each door. All the doors will be routed at the vertical ends and the rubber sponge lining will be incorporated at the routed ends. Pilasters:

All pilasters will be made of 12 mm thick Merino HPL or equivalent compact panel with chamfered edge and completed with stainless steel made lock set(comprises of thumb turn and occupancy indicator). Pilasters will be anchored to the floor using steel made L brackets and box up fixtures are used for covering the floor anchored mechanism. All pilasters will be routed at their vertical ends to facilitate closure of doors. Dividers: All intermediate partitions or dividers will be made of 12 mm thick Merino HPL or equivalent compact laminate panels. They are affixed with stainless steel made U-channel at their ends for ultimate stability of the system. Design no. as specified by Arch. / Engr. in suede finish. Size of panels to be as per drawing/as per site requirement and direction of Engineer-in-Charge. C) • Top rail is made of stainless steel grade 304. A thin plastic film pasted for surface protection. Dimension is 55mmx42mmx1.6 mm. • Corner joinery section made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 35mmx15mmx0.8 mm.

• Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx16mmx0.8 mm. • Fixed front panel to be anchored to floor with L Bracket of SS 316 and covered with SS 316 Grade Box Type plate from all directions with 100mm clear Height from ground. Surface finish to be matt type. • Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacquer coated. • Coat hook with rubber stopper made from Stainless steel grade 304. Surface finish to be lacquer type. • Round Door knob diameter 30 mm with grooves for better hand grip made from Stainless steel grade 304. Surface finish to be lacquer type. • Rotating Thumb-turn locking system with privacy indicator made from Stainless steel grade 304. Surface finish to be lacquer type. • Anti-noise rubber padding of thickness 2 mm and width 10 mm. • Stainless steel grade 304 screws. Cubicals Size as per the site requirement and as per the direction of Engineer-in-Charge.

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc complete

Providing and fixing chromium plated brass handles of approved quality including necessary screws etc complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing of vanity counter of required size made up of 18mm thick fire retardent ply as per IS:5509 both side 1 mm thick fire retardent laminated fixing all accessories set for each wash basin.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 25 mm thick

Supplying & fixing of 1 No. 6/13 Amp International UPS modular socket (shuttered) outlet Controlled by 1 No. 1 way single pole 6/13 amps modular type switch, polycarbonate white cover plate and earthing the 3rd pin painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing of Deluxe fresh air fan with louvers (ventilating fan ) with self closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required

200mm RPM1300/1400 Min.

Supply, Installation, Testing and commissioning of Indoor LED Strip, 25W, 24V DC Make: Jaquar, Model No. LSTP03X005XW or equivalent in Philips, Crompton Greaves, Bajaj, Wipro, havells etc. Complete with all accessories. (1 Set=5 Mtr.)

Supply, Installation, Testing and commissioning of Energy efficient recessed mounted LED luminaire suitable for 2x2 grid ceiling complete with driver etc as required. Make: Wipro Model No. CRCO10R036HP57G2 or equivalent in Philips, Crompton Greaves, Bajaj, Jaquar, havells etc.

Led luminiare 2' X 2', 36W, 4-6.5K, Model No. CRCO10R036HP57G2 or equivalent

Supply, Installation, Testing and commissioning of Wall Mirror Light Complete with all accessories. 8W/9W LED, 5000K Make: Jaquar Model No. KWB-CHR-MB48012A or equi in Philips, Wipro, Crompton Greaves, Bajaj, Havells etc.

Supply, Installation testing, commissioning of 35 Ltr, 5 Star, Electric Geyzer Including SS flexible connection pipes and complete accessories as per site requirement & direction of Engineer-In-Charge.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 x 16 sq. mm + 2 x 6 sq.mm

Supply, Installation testing, commissioning of Fast energy efficient HEPA–filtered hand dryer of Model No. DYSON 9KJ of DYSON make or equivalent in other makes having specifications detailed below and complete accessories as per site requirement & direction of Engineer-In-Charge. • 10–12 second dry time • Touch free operation • Hygienic performance with HEPA filter • HEPA filer captures 99.97% of particles as small as 0.3 microns from the air • Max and Eco mode available • Sheets of air travelling at 624 km/h follow the contours of your hands, removing water in less time. • hand dryer features silencers made from open-cell foam and perforated discs, reducing noise as airflow passes through the motor. • Spins 75,000 times a minute to quickly and hygienically dry hands. • produes upto 88% less CO2 emissions than single use paper towels • 5-year parts warranty, easy self-service

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Buy Back Offer: Dismantling of existing recessed / surface mounted light fittings/bollard/Post top lights /etc. (Make: crompton/bajaj etc.) as per the direction of Engineer-in-Charge & taking out from the campus under Buy Back Offer

Buy Back Offer: Dismantling of existing recessed electrical Distribution Boards (DBs) of size 6 to 12 way TPN complete with all associated accessories as per the direction of Engineer-in-Charge under Buy Back Offer.(without MCBs/RCCBs/RCBOs)

Buy Back Offer: Dismantling of existing Exhaust Fan. (Make: crompton/bajaj/etc.) as per the direction of Engineer-in-Charge & taking out from the campus under Buy Back Offer

Buy Back Offer: Dismantling of existing 25/35 Ltr Geyser. (Make: crompton/bajaj/etc.) as per the direction of Engineer-in-Charge & taking out from the campus under Buy Back Offer

G-TECH CONSTRUCTION & FABRICATORS