Purchase of Equipments for workshop practice lab item

Laying and Jointing PVC Pipe. Heading

Plumbing Demonstration board with complete kit for installation of shower with hot and cold water supply system . • Heater 3 L-1 no • hose 1/2 mtr -2 nos • Angle cock -2 nos • CPVC TEE -1 no • CPVC Plain elbow – 02 Nos • CPVC Threaded Elbow-4 nos • Shower – 1 No • CPVC Pipe ¾ inch – 17 inch -2 Nos, 12 inch – 2Nos, 15 inch – 1 Nos • Single Lever concealed diverter Medium Flow ¾ inch (20mm) • Wall mixer – 1 Nos • Concealed shower Valve – 1 No All plumbing Items mounted on a metallic rigid frame 4x3 feet , demonstrates plumbing installation of hot water & cold water

Plumbing Demonstration board with complete kit for installation of drainage system. i) FOR TOILET BATHROOM • Floor mounted western closet toilet-1 no • Elbow 4inch-2 nos, • Wash basin -1 no • 4 inch Tee – 2 Nos, • 4 Inch Y – Tee- 1 No • 4 Inch shoe (45 elbow) -1 No • 4x 1 ¼ Reducer coupling – 2 Nos • 1 ¼ Elbow – 2 Nos • 1 ¼ tee – 4 Nos • wash basin bottle trap – 1 No • wash basin coupler – 1 No • 4 inch cowl -1 no. ii) FOR KITCHEN OR ANY COMMERCIAL • 1 feet Sink – 3Nos • Sink coupler – 3Nos • 1 ¼ Elbow – 2 No • 1 ¼ Tee – 3 Nos • 1 ¼ Shoe – 1 No • Nahani Trap – 1 No • wash basin bottle trap –1 No • 3 inch Y – Tee – 1 No • 1 ¼ FTA – 3No • 3 inch Y – Tee- 1No • 3x 1 ¼ Reducer coupling – 1 No • 1 ¼ cowl – 1 No • 1 ¼ shoe – 1 No All plumbing Items mounted on a metallic rigid frame 4x3 feet , demonstrates plumbing installation of drainage system

Plumbing Demonstration board with complete kit for installation of centrifugal pump for the water supply to storage .• 1” Hex nipple – 2Nos • 1”x ¾ “ Reducer coupling – 1 No • 4”x ¾” pipe nipple -4 Nos • ¾” Elbow – 3 Nos • ¾” Union -2 Nos • 6”x3/4” pipe nipple – 3Nos • 12”x ¾” pipe nipple -1 Nos • 24”x3/4” pipe nipple-1No • ¾”x1/2” Reducer coupling-2 Nos • ¾” Hex nipple -1 No • ¾”Ball valve – 1 Nos • ¾”foot valve – 1no • ¾”pipe clamp -2 Nos • ¾” TEE – 1no • ½” water meter -1no • ½ hp pump – 1no All plumbing Items in DI and pump mounted on a metallic rigid frame, demonstrates plumbing installation of centrifugal pump

Plumbing Demonstration board with complete kit for installation of Water Purifier and mount the filter. • Water purifier Pre Filter Spun Cartridge 10 Inch -1 Nos, • Carbon + Sediment filter 8.5 Inch -1 No’s , • Spin Welded Reverse Osmosis Membrane 75 GPD 10.5 Inch -1 No’s, Mineral with Post Carbon filter 8.5 Inch -1 Nos) • Push type Quick Fit Elbows -7 Nos • Flow Restrictor -1 No’s • Pipe Tube (3 meters) -1no • 24V pump • Solenoid • Water tank with float switch All components of RO Purifier mounted on a metallic rigid frame 4x2 feet , demonstrates installation of water purifier plant

Electrical trainer kit to connect the single phase power supply for domestic applications with wiring diagram • Energymeter -1No • Two pole MCB – 1no • ELCB – 1 No • Neutral link TEN Screw Terminal grounding Bar • single pole MCB – 5 Nos • Fan regulator – 1 No • Fan – 1No • 3 Switches – 1 No • Switch and socket -1 No • Bulb -2 Nos • batten holder – 2 Nos • Switch & socket combined – 2 Nos • Fuse carrier • Neutral link • Earth link All electrical Items mounted on a metallic rigid frame 4x2 feet,, demonstrates various wiring of residential building

Prepare an earth bit and erect the earth electrode/ plate. Mention the importance of Earthing and Lightning arrester. • Earth rod, chemical earthing • lightning arrester • Earth Plate, - 1No • 6mm copper rod • Earth link • Lighning rod tip – 5Nos • Earth Access Pit 1 1x1 feet • Acrylic front side to view the pit • All electrical Items mounted on a metallic rigid frame, demonstrates earthing of residential building and its importance.

Install a CCTV camera and configure. Mention the list of Components • 4 CHANNEL DVR – 1 no • 2 mp dome camera -1 No • Hard Disk 500 GB – 1 No • ERD 4CH Power supply – 1 No • Microphone -1 N0 • HDMI cable • Video Balloon – 1 No • BNC DC Pin -1 No • Monitor -1No • Mouse – 1 No • Router -1 No • 1 U rack -1 No All surveillance Items mounted on a metallic rigid frame, demonstrates installation of CCTV cameras.

Install the Smoke Detector Alarm/ Fire alarm system as per the circuit. ( Electrical / IOT based) All electrical items mounted on a metallic rigid frame, demonstrates safety & installation • Smoke sensor Based – 1No • fire flame sensor -1 No • Fire sensor control panel – 1 No • Buzzer -1 No • display -1 No • Arduino Board – 1 No