Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC | ₹1.6 Cr | L1 | Accepted-AOC The lowest and negotiated tenderer has been accepted by the CE/TNPHCL. |
| 2 | L2₹1.6 Cr+₹3,092.80 (0.02%)Rejected-AOC NO 71 N1 5TH CROSS ARANI HOUSE ROAD KILODAPPAMUND STONE HOUSE HILL OOTY THE NILGIRIS DISTRICT 643 002 | THE NILGIRIS | TAMIL NADU | 643002 | ₹1.6 Cr+₹3,092.80 (0.02%) | L2 | Rejected-AOC Unsuccessful tenderer |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
9 Mar 2024, 6:00 pmClosed
The Superintending Engineer/TNPHCL/NC/Salem
The Superintending Engineer/TNPHCL/North Circle, No.1 and 7, Inspectors quarters, PGR Line, Behind CPO Building, Annadhanapatty, Linemedu, Salem 636 006.
Construction of 50 Nos. of Capacity Boys Hostel Building with development works for Government Higher Secondary School at Erumad in the Nilgiris District.
2024_TNPHC_438609_1
SE/NC/DB/502/2024
Open Tender
Civil Works
Lump-sum
300 days
Erumad in the Nilgiris District.
Refer the tender documents.
7 documents required · 7 mandatory
₹0
₹1.0 L
14 Mar 2024
4 Mar 2024
11 Mar 2024
4 Mar 2024
9 Mar 2024
4 Mar 2024
Amount
1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
1.5 : Earth work excavation in all soils for open foundation(excluding refilling) a. 0 to 2 mt.
1.6 : Earth work excavation for Open foundation (excluding refilling) width upto 1.25m for drains a. 0 to 2 mt.
2.6: Supply and filling of 40 mm HBSJ
2.7: Supply and filling of 20 mm HBSJ
7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m
b. T.W. below 2 m length.
25 : M.S.Holdfast
30 : Ellispattern
31 : Weathering couse
37.1 : White washing 3 coats (slaked)
39 : M.s Grills
40 : Painting - New "wood work"
41 : Painting - New "iron work"
47 : S & F Alu Towel rail 75 cm long
48 : S & F 5 pin Coat stand
49 : S & F chromium plated 8 guage Picture Hook
50.4 : Providing Tree guard
52 : PVC Water supply (ASTM) a. 32 mm dia
b. 25 mm dia
53.3: Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)
61.2: Supplying and Laying and Loose jointing of the following stone ware Pipes with ISI mark. b.150mm dia Pipe
62.2: Supplying and fixing of the following stone ware Tee b.150mm dia Tee
Electrical arrangements 69 : 15 Amp. Power plug
72 : Box type Fibre Fan hook
74 : Charges for fixing of "Fan"
76 : 8 SWG wire
78 : Earthing Station IS3043 (Type I)
86 : Anti termite treatment
87: Supplying and fixing of Single phase ELCB
112: Supplying and fixing of Exhaust Fan 300 mm dia
ANNEXURE 2.1.1 : Supplying and filling with gravel
2.1.3 : Filling sand (using crushed stone sand)
3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)
3.2.1 :Plain cement concrete 1:2:4 using 20m gauge hard broken stone jelly (using crushed stone sand)
3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)
6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture
8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand) a) In Foundation and basement
b) In Ground Floor
9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with Admixture a. In Ground Floor
b. In First Floor
10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture a. In Foundation and basement
b. In Ground Floor/stilt floor
c. In First Floor
11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 70 mm tk (B.P.) with Admixture a. In Ground floor
14.1.II : Precast Cupboard slab 40mm tk. using standardised concrete mix M20 (Using crushed stone sand) a) In Foundation and basement
18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,
b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works
c.For Square and rectangular columns and small quantities
e. Curved Surface
21.5.2 : Supply and fixing Solid UPVC door shutter with frame
21.5.5.1 : Supplying and fixing of Single Leaf solid core flush door shutter of thickness 35mm b) door size 1000 mm x 2100mm (Single Leaf)
21.5.2.1 : Supplying and fixing of Double Leaf solid core flush door shutter of thickness 35mm b) door size 1500 mm x 2100mm (Single Leaf)
21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm M20 grade (with out vibrating charges) (using crushed stone sand) c. 1000 x 2100mm
26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)
28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser
29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)
29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)
32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)
33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser
34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser
35.1.1: Plastering with CM 1:3, 12mm with WPC (using crushed stone sand) Mixed with Super Plasticiser
35.1.2: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser
36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk (using crushed stone sand) including Super plasticizer b. 75 mm wide
c. 50 mm wide
38.6 : One coat white cement for new walls and other similar works.
38.7 : Plastic Emulsion PAINT including primer for outer
43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.
44.2 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit
b) Augering 30cm dia
44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe
50.2.1 : Providing Precast Kerb stone in C.C 1:3:6 using 20mm HBSJ.(using crushed stone sand)
50.3.1 : Supply and planting avenue trees (using crushed stone sand)
50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)
50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)
52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight)
53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)
54.1.1 : S & F of 15mm dia half turn CP long body tap
54.2.1 : S & F of 15mm dia half turn CP short body tap
56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)
56.4.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)
57.1.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" TRAP (using crushed stone sand)
58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia.
58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
58.5 PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl
59.2.1 : Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm (using crushed stone sand)
60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)
61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe
64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose
b. Light point without ceiling rose
65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.
67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.
75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer
77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
98.3.2 : TW panelled Double leaf door shutter (with brass fittings) a. 1500 x 2100mm. (Double leaf)
112.1 : S & F of Exhaust Fan 225mm dia
344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm
361: Supply and laying of Concrete designer tiles flooring
361.5.1 : Virtified tile (Ivory colour) Flooring (using crushed stone sand)
367 : Providing wooden (melamine) polish for new wood
448.2: Supply and fixing 32mm dia PVC Tee with end cap
799 : Two coat of OBD over one coat white cement for inner walls
ANNEXURE II A1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark
A2:Supplying and fixing of 1 No of 6 way Triple Pole Neutral MCB sheet steel enclousre with busbar with 1 No .of 100A 4 pole Isolater, 18 Nos of 6A to 32A, 10KA single pole including all charges
A3: Supplying and fixing of 1 No of 4 way Triple Pole Neutral MCB sheet steel enclousre with busbar with 1 No .of 100A 4 pole Isolater, 12 Nos of 6A to 32A, 10KA single pole including all charges
A4: Supplying and fixing in position of UPVC window of casement type.
A5: UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outerframe 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced
A6 :Supplying and fixing of 9 Watts LED bulbs
A7: Supplying and fixing of 4' long 18 Watts LED tube light with fittings
A8: Supplying and fixing of 25 Watts LED Street light .
A9: Supply and fixing of 25 mm DIA GI pipe B class for EB service connection (For Single Phase)
A10: Supplying and fixing of printed colour glasses of 5.5 mm thick including cost of labour charges for fixing, TW beadings and cost of conveyance at site etc
A11: Supplying and fixing of Bulk head fittings suitable for 12W bulb.
A12: Supplying and fixing of 12 Watts LED bulbs.
A13: Supplying and fixing of SFRC Manhole Cover slab Size 75 x 75 cm including of all cost etc
M/s. LJK Constructions
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_521534.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .