CONSTRUCTION EXTENSION OF PLANT HRD OFFICE CUM STORE ROOM AT ALUMINA REFINERY DAMANJODI

Amount

15.2.1) Dismantling of Cement concrete work including disposal od materials within 50 mtrs lead as directed by E.I.C.

15.3.00) Dismantling of Reinforcement Cement concrete work by manually/mechanical means as directed by E.I.C.

15.7.4) Dismantling of Brick Masonry work including stacking serviciable materials . As direcrtion of E.I.C.

15.56.00) Dismantling of old plaster or skirting racking out joints and cleaning the surface for plaster/masonry works as per direction of E.I.C.

1.1.1) Removing the excavated materials , debris of any description and other waste materials, spoil including loading into trucks/tractors as directed by Engineer-in-charge.

2.8.1) Earth work in all kinds of soil in foundation, trenches or drains of required size dressing of sides and ramming of bottoms lift upto 1.5m including

Supplying & filling of sand in foundation and under floor ( Navarangpur variety sand )

4.1.8) Providing and laying plain cement concrete 1:4:8(1 cement: 4 sand: 8 aggreagate) with 40mm and down size graded stone aggregates) at all depths below and above ground level in foundations,footings,

4.1.3) Providing and laying plain cement concrete 1:2:4(1 cement: 2 sand: 4 aggreagate) with 20mm and down size graded stone aggregates) above ground level non-suspended floors ,roof surface,

22.14.00) Providing & laying Grading concrete over roof for water proofing treatment with cement concrete 1:2:4 (1 cement: 2 Coarse sand: 4 graded stone aggregate 20mm nominal size)

5.1.2) Providing and laying cement concrete for all RCC 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) works with maximum 20mm size hard granite stone aggregate in foundation rafts etc..

5.2.2) Providing and laying cement concrete for all RCC 1:1.5:3(1cement:1.5coarse Nawarangpur sand:3graded stone aggregate 20 mm nominal size) works with maximum 20mm size

5.9.1) Centring and shuttering in Foundations, footings, bases of columns, etc. for mass concrete including strutting, propping etc., and removal of form work for RCC work as directed by Engineer-in-Charge.

5.9.3) Centring and shuttering in Suspended floors, roofs, landings, balconies and access platform including strutting, propping etc., and removal of form work for RCC work as directed by Engineer-in-Charge.

5.9.5) Centring and shuttering in Lintels, beams, plinth beams, girders, bressumers and cantileversincluding strutting, propping etc., and removal of form work for RCC work as directed by Engineer-in-Charge.

5.9.6) Centring and shuttering in Columns, Pillars, Piers, Abutments, Posts and Struts including strutting, propping etc, and removal of form work for RCC work as directed by Engineer-in-Charge.

5.22.3) Transporting, Bending/binding and placing in position high yield deformed bars reinforcement or cold twisted deformed bars reinforcement for RCC Work at all height and depths, taking the same from store issue points to site of work,

6.32.1) Laying of Fly Ash Brick masonry with cement mortar 1:6 ( 1cement : 6 coarse sand )in foundation upto any depth in any shape including curing for 15 days, a

6.32.2) Laying of Fly Ash Brick masonry with cement mortar 1:6 ( 1cement : 6 coarse sand ) in super structure upto floor V level in any shape including scaffolding, staging, curing for 15 days,

9.48.1) Providing &fixing of M.S.grill/railings/ gate/windows/ventilators of required pattern in wooden/steel frame of windows, staircases, corridors etc. with M.S. flats, angles,chanels,"Z" angles, Sq.bars, M.S.Sheets etc. with screws/lugs for fixing in position etc.

11.41.2) Providing and laying vitrfied floor tiles of size 600x600 mm approved size of 1st quality of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4

13.2.2) Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement:6 sand) on the rough sides of single or half brick wall or masonary work using approved type of sand including curiing etc.

13.16.1) Providing and laying 6mm thick cement plaster in cement mortar 1:3 (1cement:3 fine sand) on ceiling of roof using approved type of sand including curing etc. complete as per direction of Engineer-in-Charge.

13.26.00) Pviding & Laying of plaster of paris of 2mm thickness on the new walls to give an even and smooth surface with all materials , tools,& tackles etc all complete as per direction of E.I.C.

13.42.1) Distempering with oil bound distemper New work ( Two or more coats ) over one coat of priming work on walls, ceiling etc.

13.47.1) P&A Premium Acrylic smooth exterior paint with Silicon additives of required shade New WORKS ( Two or more coats applied @ 1.43 Litrs/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm )

13.61.1) Supplying and Painting of two coats with synthetic enamel paint of approved brand and manufacturers in all shades including a coat of primer on all types of surface like steel/ wood/ concrete/ plaster/bituminous

21.1.2.2) Providing and fixing of Powder coated Aluminium (minimum thickness of powder coating 50 micron )work for doors, windows,ventilators and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make

9.76) P&F of bright finished 100mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of e.i.c.

21.2.2) Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS12823 Grade 1 Typeii,

21.3.2) Providing & fixing of float plain/colour glass panes of 5.50 mm thickness in Aluminium doors, windows ventilators and partition etc with EPDM RUBBER/NEOPRENE gascate etc complete as per drawing and direction of E.I.C

9.83) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

12.41.2) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm dia. Pipe

AMITAV CONSTRUCTION (BID ID -3167811)

DIPAK ENTERPRISES (BID ID -3168002)

M/S RAHUL CONSTRUCTION (BID ID -3168356)

KETHAKI ENGINEERING CONSTRUCTION (BID ID -3167946)

SURENDRANATH MALLICK (BID ID -3168331)

M/S SADASHIV ENTERPRISES (BID ID -3168332)

M/S SOBHA BISOI (BID ID -3166304)

S K ENGINEERING WORKS (BID ID -3168319)

M/S PALEI CONSTRUCTION (BID ID -3164534)

MS/ BABA BISWANATH CONSTRUCTION (BID ID -3167949)

CHINTAMANI ENTERPRISES (BID ID -3168372)