Fabrication, and installation of D9 gate installed on Naj canal, Billawar ( District Kathua).

Amount

Fabrication of gate on D9 (10 ft x 3.5 ft), Naj canal near government hospital Billawar by way of dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod to the road side after crossing the canal with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of leaf structure of size 10 ft x 3.5 ft (approx) using the ISMC 100 channel size with vertical & horizontal cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5/6mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing, fabrication and fitting of 1 no. stem rod MS bar of length 10 ft approx and then turning, threading, finishing to the original size. Fabrication, providing & fitting of 05 Ton capacity manually operated, worm gear type winch machine along with base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with two coats of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Rebate on Old Parts

Guru Nanak Engineering Corporation

M/S A D INDUSTRIES