SPECIAL REPAIR OF BLDG NO P-15 INCLUDING BOUNDARY WALL

Amount

Dismantling brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for Brick work with sub class 'B' fly ash bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ fly ash brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. .

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 finished even and complete all as specified

M&L for preparing newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over and including 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound distemper over and including 2mm thick wall care putty on wall over priming surafce complete all as specified and directed

M&L for preparing newly plastered surfaces of external Walls and applying two coats of cement base paint over a coat of appropriate primer complete all as as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of cement base paint on external wall surfaces over a coat of appropriate primer complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Refixing of shutters of any description, exc 1.0 sqm but n exc 2.0 sqm each in the same opening, including taking down of shutters, easing and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. , complete all as specified and as directed.

S&F, Aluminium anodised sections powder coated( Minimum thickness of powder coating 50 micron), for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with and including frames, shutters and grills, handles, tower bolts etc complete all as specified and directed. (Note:- Floor door spring, sheet glass, wire cloth, lock etc shall be measured and paid for separately.)

S&F 2nd class hardwood plain solid straight chowkhat or frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F framed work conforming to Fe-290 ( Gde E-165), as in doors or gates of angle or other section with gusset plates ,rails,braces etc, complete, drilled for fixing of steel gate sheeting or other covering, doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,running rails and guides ) and hanging also fastening and fixing complete all as specified and directed.

S&F PVC door frame size 50mm x 47mm made out of 5mm single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . MS frame shall be covered with heat moulded plain colour PVC, 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing as shown in SSR Part II 2020

S & F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and directed.

S & F 25 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and directed.

M&Lfor 19mm thick prelaminated particle board, interior grade , prelaminated one side with decorative choice lamination and other side balancing white, fixed with screw to timber/steel frame work complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm, 90 degree bent edge, wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F aluminum anodised barrel tower bolt 125 mm long of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

Supply and fixing 4 mm thick, figured glass ,pin headed type and glazing with oil putty in square n exc 0.5 sq.m each pane complete all as specified and as directed.

M&L for mild steel pipe 22 to 25 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), commplete all as specified and dircted.

S&F aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed.

S&F MS Peg set of six powder coated as approved by GE complete all as specified and directed.

M&L for cutting holes in brick walls, exc half brick and n exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

M&L for treating small article such as stops, covers, gully gratings, hold fast, ends of post, backs of chowkat etc with creosote oil, tarred area n exc 0.10 Sqm each complete all as specified and directed.

M&L for preparation of newly wooden based surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of (white or tinted) complete all as specified and directed.

M&L for prepration of old painted surfaces of steel of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed. .

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed.

M&L for 25mm thick PCC1:2:4 Type B0 (using 12.50mm graded crushed stone aggregate ) as in sub base complete all as specified and directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L Machine cut Cuddapah stone slab on cooking platform/shelf, 20-25mm thick over and including 20mm thick cement screed base in CM(1:6), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of granite stone slabs one edge, such as in counter type WHB, cooking platform and other similar situations etc. complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular), area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 x 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L 75 mm thick P.C.C (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base complete all as dpecified and directed.

M&L vitrified ceremic tiles 10 mm thick, in LIGHT SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of coloured tiles, laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L for Vitrified ceramic tiles 10mm thick, LIGHT SHADE, (square/rectangular) polished, area of each tile not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles with and including 10mm thick plaster (backing coat) in CM (1:4) complete all as specified and directed.

Dismantling of asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ( AZ-150) of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (AZ-150) of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. (Make :- ARMSTRONG/ EVEREST or other equivalent Make as approved by GE).

Dismantling timber fillets,posts, rafter, purlin under 40 sqcm in sectional area,complete all as specified and as directed.

Dismantling timber in scantling 40Sqcm and over in section, framed work, in any position complete all as specified and directed.

S&F mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410W (Gde-E-250 ), quality 'A', complete all as specified and directed.

S & F mild steel plate (plain or chequered) channels,square cut or notched (ordinary and counter sunk ) forming holes, with riveted,bolted or welded attachement conforming to Fe- 290 (Gde E-165) complete all as specified and directed.

S&Fmild steel screw bolts (machine made)with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square n exc 5 cm long, the dia of neck 5 to 10 mm complete all as specified and directed.

S&Fmild steel screw bolts (machine made)with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square exc 5 cm and n exc 10 cm long, the dia of neck 11 to 15 mm complete all as specified and directed.

S&F hand rails, half rounded or other steel section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe-290(Gde E-165) complete all as specified and directed.

M&L for preparation of newly steel surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of steel based surfacces of any description, n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm bore pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern) white, excluding fixing bolts, flushing cistern and flush pipe with and including 'P' or 'S' trap and making good the disturbed floor to match with existing specification complete all as specified and directed.

S&F Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.

S&F in repairs PVC low level flushing cistern , white , 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body, fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed.

S&F repairs 15mm bore dia concealed/Angular stop valves chromium plated, fancy type , screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S& F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S & F of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with waste fittings,plug washers, waste pipes, cast iron cantilever brackets, connecting union, overall size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe in repair complete all as specified and directed.

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width, of trade pattern complete all as specified and directed.

S&F, in repair, 32mm bore, Low Density Polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F, in repair, glass corner size 300mmx300mm with chromium plated railing complete all as specified and directed.

S&F, in repair, chromium plated, Soap dish holder fixed with screws complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide, with chromium plated bracket guards and railing 600 mm long complete all as specified.Make- Jaquar Cat Part No- AKP 35715PS or equivalent in Prayag as approved by GE.

Supply & fixed in repairs PVC connection 15 mm size , 45 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified and directed.

S&F in repair for chromium plated brass wash hand basin mixer screwed down high pressure with or without lettered, 'HOT' and 'COLD' and flynuts 15 mm dia complete all as specified and directed.

S&F in repair for chromium plated brass wall mixer with telephonically shower arrangement screwed down high pressure with or without lettered, 'HOT' and 'COLD' and flynuts 15 mm dia complete all as specified and directed.

S&F in repair for chromium plated brass sink mixer screwed down high pressure with or without lettered, 'HOT' and 'COLD' and flynuts 15 mm dia complete all as specified and directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china pedestal pattern water closet complete all as specified and directed.

S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S & F stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc all as specified and directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M & L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

S&F 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified and directed.

Dismantling water tanks exc 500 and n exc 1000 ltr capacity complete all as specified and directed.

S&F in repairs Ball brass valves 20mm , high pressure , with polythene float and flynut complete screwed for pipes or brass ferrule and fixed all as directed.

S&F 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed

S& F 1000 ltrs rotational moulded polyethylene water storage tanks, double layered ( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.

M & L for precast reinforced cement concrete type B-1 1:2:4 ( using 20 mm graded aggregate ) as in landing, cover slab, set in CM 1:4 including necessary form work, if required, complete all as specified and directed. ( Note : Reinforcement will be measured and paid for separately)

M&L for RCC (1:1.5:3), Type A1, ( nominal mix), using 20mm graded crushed stone aggregate as in lintel band ,Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed. ( Note : Reinforcement will be measured and paid for separately)

Use and waste of form work to faces of walls,lintel band, retaining walls , abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter, surface fair finished complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S & F Mild steel TMT bars 8 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level)

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection, finished even & fair without using extra cement, laid in bays with construction joint 6mm thick, filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) Type B0 (using 12.5mm graded crushed stone aggregate ), finished even and smooth without using extra cement complete all as specified and directed

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations,filling and mass concrete and sub base finished even & fair complete as specified and directed..

M&L for 50 mm thick Sand cushion under floors/paver blocks complete all as specified and as directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block, any shape and size, with grey cement and pigment, conforming to IS 15658-2006, M 35 Grade complete all as specified and as directed.

M&L for providing 35mm thick precast reinforced cement concrete louvres and jallies, type B0 1:2:4 using 12.5mm graded crushed stone aggregate, measured solid,including all mouldings but excluding frame and set in CM 1:4 complete all as specified and directed. ( Note : Reinforcement will be measured and paid for separately.)

M&L for RCC (1:1.5:3) type A-1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-Reinforcement where provided shall be measured and paid for separately)

M&L for providing and injecting chemical emulsion for post construction anti -termite treatment of soil under existing floors using emulsion @ one litres per hole ,300 mm apart including drilling and plugging 12mm dia holes with cement mortar (1 cement :2 coarse sand ) to match with the existing floors complete all as specified and directed.

M&L for providing and injecting chemical emulsion for post construction anti -termite treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 litre per linear metre including drilling and plugging holes etc. complete all as specified and directed.

M&L for providing and injecting chemical emulsion for post construction anti -termite treatment at point of contact of wood work by chemical emulsion (in oil or kerosene based solution )@ 0.5 litre /hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same. complete all as specified and directed.

Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes laying of cable etc.n exc 10 sqm on plan and n exc 1.50m in depth complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil complete all as specified and as directed..

Removing excavated material not exceed 50 m depositing where directed at a level n exc 1.5 mtr above the starting point.

M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipe including packing under and haunching pipes with concrete for 150mm dia pipe complete all as specified and directed

Demolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and directed.

M&L Reinforced cement concrete pipes 150 mm bore class NP-2 laid and jointed, with collars complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia of pipe.complete all as specified and as directed

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed by Engineer in charge.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed. .

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size complete all as specified and directed by Engineer in charge.

M & L for Sub Main Wiring four single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and two run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge (Note :-Four of 6.0 Sqmm Wire and two No of 6.0 Sqmm Earth wire and PVC conduit in One RM length Measured as one unit length.)

M & L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge. (Note :- Two Nos of 4.00 Sqmm Wire and One No of 2.5 Sqmm Earth wire and PVC conduit in One RM length Measured as one unit length.)

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor FLASH cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge for the followings : -

One light point/Bell point controlled by one switch.

One fan point /exhaust fan controlled by one switch.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 146 above but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge.

S & F in repair lamp holder PVC Polycarbonate type body, with back plate for batten fitting with and including 9 Watt LED lamp complete all as specified and as directed by Engineer in charge.

Supply and fixing in replacement decorative wall light fitting with LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with and including LED lamp 9 Watt complete with fixing arrangements on wall complete all as specified and directed.

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire to be tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Sec), (Make : Philips Cat part BN 021 LED 22S 6500 PSU GR S1or equivalent in Havells/ Bajaj as approved by GE.)

S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor application , connector block, etc . complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. (Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS /BAJAJ as approved by GE.)

S & F in repair Bulk head endura LED light fitting complete with and including 10 watt LED lamp and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. (Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ as approved by GE.)

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with two coats of aluminium paint over a coat of primer complete all as specified and as directed. (Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in Philips / Bajaj as approved by GE.)

S & F Exhaust fan heavy duty 300 mm sweep, 230 V, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed by Engineer in-charge.

S/F Exhaust fan heavy duty plastic body 250 mm sweep, single phase AC 230 V, 50 Hz , including making hole of required size and making good the disturbed surface and including louvers with fitting accessories complete all as specified and directed by Engineer in-charge.

S&F in replacement of sheet metal enclosure distribution boards, double door, factory made, Vertical TPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TPN 63 A -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed. (MAKE:LEGRAND cat part no:507745 or equivalent in Siemens/ L&T/ Havells as approved by GE.)

Supplying and fixing,testing water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to be fixed on wall and making good the disturbed surface, complete all as required and as directed

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed of size 15mm.make prayag or equivalent in Marc, GEM, Seira

S&F the Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore.make prayag , /parryware or equivalent in Masrc, Gem Seira

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4 way with 200 Amps rated bus bar 240 volts single pole and neutral, double door complete all as specified and directed by Engineer in charge (Make- Legrand cat part No.- 5077 80 ,/seimens/GE as approved by GE).

S & F in repair MCB TPN 415 volts 63 Amps, 'C' Series complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement MCB single pole 240 volts upto 40 Amps, 'C' series complete all as specified and directed by Engineer in charge.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with and including 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as shown on electrical Plate No. 3 and all as specified and directed including testing on completion including the material and labour for the followings : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 7.5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

Supply & fixing integral post top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with and including 10 Watt LED lamp , GI pipe as required to fix in gate pillar complete all as specified and directed .

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt, no of blades three, type of blade leaf 1.05 mm thick aluminium sheet, remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed by Engr-inCharge.

Supply & fixing electronic energy meter tamper proof design digital technology of SINGLE phase 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10-60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories on finished wooden box complete all as specified & directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm including taking out old unserviceable cable complete all as specified and directed by Engineer in charge

Supply , laying, testing and commissioning LT underground cable 1100 volts grade, XLPE insulated , 10 Sqmm 2 core screened, PVC sheathed Heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles and wall etc including taking out old unserviceable cable complete all as specified and directed by Engineer in charge. ( Note : Excavation, earthwork, sand cushioning and cable protection will bre measured and paid for separately.)

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. (Note :- Punned thickness shall be measured.)

M & L for fly ash Bricks, sub class 'B' for protection of cable in trenches, laid flat with length of brick perpendicular to the axis of cable complete all as specified and as directed. .

M & L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Schedule of credit amount of Rs 1,27,085.00 to be deducted during AOC

DOBARIA BUILDCON

Tiki Water proofing Co

M/s Ram Associates