SPECIAL REPAIR TO ROAD AND ROAD FURNITURE

Amount

Scarifiying of picking gravelled macadam or biutminous macadam surface in area exceeding 400 Sqm and depth exceeding 100mm complete all as specified and as directed.

M&L 75 mm thick (Compacted thickness) WBM with coarse aggregate granite, trap, basalt of grading 3 (50 to 20 mm size), spread, rolled and consolidated to required gradient and camber complete all as specified and directed.

M & L for unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

Preparing of existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L applying evenly a tack coat of paving bitumen of grade (VG-10) @ 10 Kg per ten square metre using paving bitumen over WBM surfaces complete all as specified and as directed.

M&L applying evenly a tack coat of paving bitumen of grade (VG-10) @ 5 Kg per ten square metre using paving bitumen over black bituminous surfaces complete all as specified and as directed.

M&L Providing Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with minimum 5% binder content by weight of total mix, using paving bitumen (VG -30), using hot mix plant and laid using mechanical paver, rolled and compacted to required camber and gradient complete. Note :- (i) Work shall be executed as per design mix by Govt approved lab (NABL)/Govt Engg College as approved by GE. (ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.

Preparing the bituminous surfaces by removing or cleaning of all dirt, scales, oil grease and foreign materials etc complete as per the direction of Engineer-in-Charge and providing 2.5mm (minimum) thick hot thermoplastic paint (Retro reflective type) for road marking in white/yellow shade by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gun, beads dispenser, propane tank, heaters and profile shoe, heaterdriven by skilled operator on road surfaces complete all as specified and as directed. Note:- (i) Road marking work shall be carried out in accordance with manufacture's instructions and as specified in particular specifications. (ii) Refer MORTH specification of Para 803.4.2.1 and 800.4.2.2 on bituminous surface/surfaces in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specification Para 803.4.3.3

Repair to pot holes not exceeding one sqm each including sweeping free from dust and mud water, scoring sunken surfaces in roads, paths etc cutting around edges to atleast 25mm in depth making good by applying tack coat @ 5kg per 10 sqm using paving bitumen grade VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm using bitumen grade VG-30, binded with 0.09cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exceeding 30mm complete.

Providing Premix bituminous macadam using Hot Mix Plant, laid, rolled and compacted to required gradient and camber using binder (paving bitumen Vg 30) with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) complete all as specified and as directed. Note :- (i) Work shall be executed as per design mix by Govt approved lab (NABL)/Govt Engg College as approved by GE. (ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.

M&L moorum filling in road side berms laid in layers n.exc. 15cm thick rolled and consolidated to required gradient and camber complete all as specified and as directed.

Manufacturing, supplying and fixing retro reflective mandatory / regulatory sign boards of 900mm diameter with support length 3750mm and made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC:67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3mm alongwith theft resistant measures, mounted and fixed with 02 Nos. MS angles of size 32x35x5mm to a vertical post made up to MS Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, provising and fixing MS message plate of required size, steel work to be painted with two or more coat of synthetic enamel paint of required shade and of approved brand & manufacturer over primer coat of zinc chromate yellow primer (Verical MS Tee support to be painted in black and white colours), back side of aluminium sheet to be painted with two or more coat of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete all as specified and as directed.

Manufacturing, supplying and fixing retro reflective cautionary / warning sign boards of equilateral shape having each side of 900mm with support length 3750mm and made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC:67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3mm alongwith theft resistant measures, mounted and fixed with 02 Nos. MS angles of size 32x35x5mm to a vertical post made up to MS Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, provising and fixing MS message plate of required size, steel work to be painted with two or more coat of synthetic enamel paint of required shade and of approved brand & manufacturer over primer coat of zinc chromate yellow primer (Verical MS Tee support to be painted in black and white colours), back side of aluminium sheet to be painted with two or more coat of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete all as specified and as directed.

Manufacturing, supplying and fixing retro reflective overhead informatory road signage of size 900mm x 600mm boards, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type heat activated retro reflective sheeting conforming to type III of ASTM-D 4956-01 as approved by Engineer-in-Charge, letters, borders etc. as per IRC:67-2001, in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measure, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and errecting the same in position all complete as per drawings, specification and direction of the engineer-in-Charge (Structural frame work including MS pplate to be provided seperately. Rectangular area of the sheet only shall be measured fo payment).

Manufacturing, supplying and fixing retroreflective regulatory sign board of size 900mm diameter, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lense type heat activated retro reflective sheeting conforming to type IV of ASTM-D 4956-01 as approved by Engineer-in-Charge, Letters, borders etc. will be as per IRC:67-2001, with required colour scheme on the boards and with highintensity grade A. The aluminium sheet to be rivetted to MS frame of angle iron iron of size 40x40x4mm. The board will be fixed to 1 No 50x50mm square post made of MS angle 50x50x4mm, 4m long welded to the frame with adequate anti theft arrangement. Sheet work to be painted with two or more coats synthetic enamel paint over and under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respect all as specified and directed.

S&F metal tubular delineater made out of ABS round body fitted with 2 Nos 65mm dia highly reflective made out of PMMA and mounted on 45/50 mm dia steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips and anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed.

S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25 mm (shank 65mm) of high efficiency mon rystafie solar panel 2.4V/0.3 Watt one NIed recharageable battery (1.2V/1600MA) consiting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer instructions etc. complete all as specified and directed.

M&L for preparing bituminous surface of road and 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc. 10cm wide on roads pavements with hot applied thermo plstic road marking paint of approved colour conforming t BS 3262-1989 with special appricator machine all as per manufacturers instruction complete all as specified and as directed.

S&F in repair modular speed breaker 350mm wide made of plastic ABS model No GP 1005 of size 250mm x 350mm x 50mm manufactured by Gorgia plastic or equivalent fixed with acrylic reflector on both sides fixed on road surfaces with suitable bolts as per manufacturers instructions complete all as specified and as directed.

S&F in repair Traffic Mirror (Convex) 600mm dia, made out of ABS / Fibre / Plastic body fixed in position with mild steel post of 75mm dia 1.5m high, embeded in PCC 1:3:6 type C1 using 20mm graded stone aggregate block, 30 cm deep and including 6mm thick MS plade of size 150 x 150mm for anchoring including painting of exposed postion of post with two coat of synthetic enamel paint over a coat of red oxide primer e imported OUTDOOR Polycarbonate convex mirror of 60cm diameter with 130 degree plus actual viewing angle , equipped with adjusting swivel and mounting bracket for infinite adjustment.complete all as specified and as directed.

S&F framed work such as grills, grating etc. with ends of bars shoulders and / or revetted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing, frame work for water tank and similar work conforming to Fe-290, Gde-E-165 also fastening and fixing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L non skid, heavy duty, Endura tiles 300x300x20mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as leveling course complete all as specified and directed.

M/S AM ENTERPRISES

M/S ANKIT ENTERPRISES

SANJAY B SHARMA