COMPREHENSIVE MAINT CONTRACT FOR MINOR UNIT AT MIL STN UDAIPUR

Amount

Taking down wooden chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.00 Sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2.00 sqm each and removing from site complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work with fly ash using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 7 to 8mm thick Non skid joint free coloured ceramic tiles area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surface size 350x 250x 7 mm/ 450X 350X 7mm thick laid over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match.The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered.

Material & Labour for white Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per above but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.

M&L 20 mm thick Black granite stone in single piece in cooking plateform, steps, jambs, pillars slab for oval complete laid over 15mm thick in CM 1:4 and jointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete and providing necessary holes for gas pipe / water supply pipe etc. complete all as specified and directed.

M&L machine cut Udaipur Green marble stone slab 18-20 mm thick mirror polished laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed as in steps, cills etc including rounding of edges at nosing.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site ofm work as directed by the Engr-in-Charge.

Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished without using extra cement complete.

Material & Labour for 25 mm thick Cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in leveling course of floor without using extra cement complete.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including cement screed bed 15 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc,complete all as specified.

All as per item above but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified.

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3.

Supply and Fix in repairs Vitreous China wash basin, flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and vitreous china pedestal complete. all as specified.

Supply and fixing in repair 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks , compete all as specified.

Supply and fixing vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified.

Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern & flush pipe) & incl 01 No ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding, complete all as specified.

Supply and fixing plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device.

S&F in repairs health fucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply & fixed in repairs Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed.

Supply & fixed in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

Supply & fixed in repairs push taps, cast copper alloy, chromium plated screwed for iron pipe complete all as specified.

Supply and fixing in repairs, Urinal spreader of 15 mm dia of Brass chromium plated for fixing with 15 mm dia pipe., compete all as specified.

Supply & fixed in repairs stainless steel sink without drainage board, made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall sizesize 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

S&F in repair 15mm in repair bore consealed stop valve type chromium plated fancy type cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

Supply & fixed in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing angle/stop cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. (Note : Weight of cock shall not be less than 0.575kg)

Supply & fixed in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified.

Supply & fixed in repairs stainless steel grating openable 100mm dia with/without hole including fixing with white cement complete all as specified.

Supply & fixed in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified.

Supply & fixed in repair soap dish, vitreous china white, approximate size 160x160x90mm complete all as specified.

Supply and fixing in repairs of prelaminated 18/19mm thickness particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as required at site.

All as item above but 20mm bore, complete all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Material & Labour Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed..

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

Supply and fixing factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing.

Supply & fixed 150 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm long Butt hinges, extruded aluminium, alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 all complete as specified and directed.

S&F in repairs of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane

Supply & fixed Powder coated aluminium frame doors, windows, ventilators, partition etc fixed/openable type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified. Note :- minimum thickness of powder coating 50 micron.

Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron.

S&F in repair door closer aluminium (extruded) hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg and fixed, complete all as specified and directed

Supply & fixed for anodised aluminium grill of (anodised transparent or dyed to required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, all complete as per reuirement and direction of Engineer encharge.

Supply and fixing anodised aluminium window and ventilator shutters, powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply & Fixing 5.5 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply & fixed steel for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, fixed to wall complete all specified and directed.

S&F 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes.

S&F 75mm dia UPVC (SWR) bends any radius including cutting of holes.

S&F 75mm dia UPVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all specified and directed.

S&F UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and directed.

Supplying & laying 03 coats of reinforced acrylic coating ‘New Coat’ as on sunken floor applied @1.5 Ltr/Sqm in 03 coats to achieve total 1mm thickness in any position including cleaning surface of sunken slab with wire brush/mechanical brush and with water thoroughly to remove all dust/dirt and loose particles to expose base concrete/sunken slab etc including repairing of loose/defective joints and applying 15mm thick plaster in CM 1:3 to level the surface and treatment to be applied all as per manufacturers instructions, complete all as specified and directed.

Material & labour for 100mm thick PCC 1:2:4 type B-1, (20mm graded aggregate) as in sunken floor complete all as specified and directed

Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and labour 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty on wall complete all as specified and directed.

Material and Labour for applying two coat of white wash on ceiling surfaces incl preparation of newly plastered wall surfaces complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint on wooden surfaces or wood based surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint on steel surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed.

Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceiling surfaces complete all as specified.

M&L for preparation of old plastered or un-plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and Labour for applying one coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and Labour for one coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas width between 10 cm to 20 cm on prepared putty surfaces or old painted surfaces of bldg upto tripple storeys bldgs including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified & directed.

Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonrty wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch.

(a) One light point point controlled by one switch with cables 1.5 sq. mm size

(b) One fan/exhaust fan point controlled by one switch with cables 1.5 sq. mm size

(c) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size.

(d) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size.

(e) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size.

(f) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size.

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

All as per items No 85 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing Switch piano, flush type single pole, one way 6 Amp all as specified and directed.

S&F switch piano flush type single pole 16 Amp 2 Way .

Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and directed.

Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole.

Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and directed.

M&L socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and directed.

M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

Supply & Fixingixing inreplacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and directed.

Supply & Fixing inreplacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply & Fixing inreplacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type.

(a) 08 ways

(b) 04 ways

(c) 02 ways

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning.

Supply and fixing SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4 sqmm cable with combined of R,Y & B and one run of 4 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as per directed by Engr-in-Charge.

Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm x 50 mm deep

Supply & replacement of hanging clamp, nuts and bolts including Rubber Reel of Ceiling Fan (any type, sweep and make) complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of PVC canopy for ceiling fan 1200/1400 mm sweep.

Supply & fixing in replacement of capacitor holder for ceiling fan 1200/1400 mm sweep.

Supply & fixed in replacement of capacitor of 2.5 MFD all as specified.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 20 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size ltrs/50 ltrs etc. complete all as specified.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 25 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size 25 ltrs/50 ltrs etc. complete all as specified.

Supply and replace Ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) (Make : Prayag/Polytuff/Pearl)

Taking down & Fixing geyser of cap 25 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement including making good and matching existing surgace and finish all as directed.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete and fixed on position all as directed

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position all as directed

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed.

Supply and replace Heavy duty PVC connection with SS nuts and washer suitable for hot water, complete of size15mm dia x 45cms long all as directed

ditto as per item No 124 but 600mm long

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5/2.0 KW

Supply and replace heating element suitable for surya geysers round type including rubber ring clamping screws etc complete of 1.5/2.0 KW.

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature

Supply and replace syphonic assembly for geyser as per existing size and suitable for surya geysrs 25 ltrs capacity

S&F in replacement of unsevicebale indicating lamps for geysers of Bajaj/Veenus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser.

Supply and replace pressure release valve complete

Supply & Replace 3 Pin Plug top 15 Amp

SNEH CORPORATION (BID ID -3433850)

m/s sharma constructions (BID ID -3433533)

M/s Ajay kumar Garge (BID ID -3433623)

L AND J CONSTRUCTION CO. (BID ID -3433060)

naveen enterprises (BID ID -3433176)

SAPPERS CONSTRUCTION (BID ID -3431719)

Haritwal traders (BID ID -3431882)

CHOPRA ENTERPRISES (BID ID -3431627)