Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable | |
| 2 | L2₹9.9 L+₹74,997.50 (8.22%)Rejected-Finance E 140 2010 BKP VILL AMTALLA PO DUMARCHIR DIST PAKUR PIN 814111 JHARKHAND | PAKUR | PAKUR | JHARKHAND | 814111 | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹9.9 L+₹78,837.50 (8.64%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹10.0 L+₹84,741 (9.29%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹10.0 L+₹87,339.50 (9.58%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
3 Dec 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHree Tapan Das AE Civil
AGE I SINGARSI
REPAIR TO ROOF COVERING PPGI SHEET EAVE BOARD WIND TIES FALSE CEILINGS AND RELATED CIVIL WORKS AT CERTAIN BUILDINGS AT AF STN SINGARSI UNDER AGE I SINGARSI
2024_MES_672320_3
C/8684/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I SINGARSI
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
Yes
AGE I SINGARSI
₹18,000
Yes
11 Dec 2024
19 Nov 2024
5 Dec 2024
19 Nov 2024
3 Dec 2024
19 Nov 2024
Amount
Dismantling of ceiling board of any description, fixed in any position with nails etc complete all as specified and as directed.
S&F GI pre painted snap grid 605 x 605mm frame work for false ceiling with 12mm thick GI wire work,complete all as specified and directed by Engr-in-charge.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.50mm dia. 40mm long,complete all as specified and directed by Engr-in-charge.
S&F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI /Aluminium framework with screws in ceiling flat or sloping,complete all as specified and directed by Engr-in-charge.
Dismantling Asbestos sheet (corrugated or semi corrugated etc) sheeting of any gauge & any thickness, including Nainital or similar pattern of roof coverings including ridge,complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed by Engr-in-charge.
Dismantling PVC water storage tanks of capcity exc. 250 litres but n. exc. 500 litres and removing from site,complete all as specified and as directed by Engineer-in-Charge.
S&F Rotational moulded polyethylene water storage tank including, plastic lid cover, triple layered, white coloured, (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt 210 gram),complete all as specified in SSR Part I and as directed by Engineer-in-Charge.
S&F rotational moulded polyethylene water storage tank triple layered, white coloured ( cylindrical vertical with closed top) hoisted and fixed in position of 1000 liters capacity confiring to IS specification, complete all as specified and as directed.
M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracks and making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and pavings, n exc 15 cm thickness (below or ground level),complete all as specified and as directed by Engineer-in-Charge.
M&L for PCC (1:3:6) of 75 mm thick (using 40 mm graded stone agg) as in plinth protection, Hard standing finished even and fair,complete all as specified and as directed by Engineer-in-Charge.
M&L for cement concrete of 25 mm thick,1:2:4 ( 12.5 mm graded aggregate ) as in sub floors,complete all as specified and directed by Engineer-in-Charge.
M&L for Demolition of stone slabs and tiles of any descriiption or thickness infloors, aprons etc,complete all as specified and as directed by Engr-in-charge.
Material and labour for chequered cement concrete tiles size (300 x 300 x 25)mm thick with mixture of white and gray cement in equal proportion and no pigment set, jointed and pointed in neat cement slurry in floors including 15mm scred bed of (CM 1:4),complete all as specified and as directed by Engr-in-charge.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete, complete all as specified and as directed by Engr-in-charge.
Demolition of brick/stone/boulder masonry, built in cement mortar including all quoins,arches,pillars,etc,but exceeding ashlar facings,dressed stone work and precast concrete,complete all as specified and directed by Engineer-in-Charge.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and as directed by Engr-in-charge.
Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work,complete all as specified and as directed.
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') ,complete all as specified and as directed by Engr-in Charge.
Taking down cement or cement plaster of any description on brick or stone walls or from concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc and removing unserviceable material outside cantt area, complete all as specified and as directed by Engr-in-charge.
M&L for Rendering 15 mm thick in CM 1:6 on fare faces of brick surface finished even and smooth without using extra cement etc all as specified (icluding necessay scafolding lifting arrangement),complete all as specified and as directed by Engr-in-charge.
M&L for two coats of Oil bound distemper incl preparation of new plastered surface,complete all as specified and as directed.
M/S MBS TRADING CO (BID ID -3173317)
M/S SINGH ENTERPRISE (BID ID -3174193)
M/S ASHA ENTERPRISE (BID ID -3173234)
M/S AMARNATH AGARWALLA (BID ID -3174228)
M/S New Builders Corporation (BID ID -3174736)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .