PERIODICAL SERVICES TO CERTAIN BUILDINGS, EXTERNAL AND INTERNAL PLASTER, JOINERY WORKS, PLUMBING WORKS, SANITARY PIPES AND OTHER VARIOUS B/R WORKS IN MD ACCN AND FINISHES TO BLDG UNDER AGE B/R-I AT GE HADDO, PORT BLAIR

Amount

Taking down cement plaster on brick/ stone masonry wall including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:3 on surface of ceiling finished even and smooth without using extra cement all as specified.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of precast concrete block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified

Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after complete removal of existing treatment complete all as specified.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after complete removal of existing treatment complete all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of average 1mm wall care putty to make surface smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of ceiling and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white wash complete all specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.75 litre/ 10 sqm complete all as specified and as directed

M&L for complete removal of existing treatment on plastered wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed

M&L for complete removal of old existing treatement/finishes upto (G+3) bldgs providing necessary scaffolding and safety precautions and cleaning the surfaces free from any loose paint, dust, grease, growth of fungus, algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer. (c) Applying one or two coats of damp proof primer (priming coat) using airless spray technology with max working pressure of 22.8 MPa/3300 Psi and capable of operating single spray gun with a max material hose length of 30m. (d) Applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 Psi and capable of operating single spray gun with a max material hose length of 30m

Note : (i) Work shall be executed only through authorised applicator duly approved by Manufacturer of paint and certificate in this connection shall be submitted by the contractor. (ii) The contractor shall upload MOU letter with any one of paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer. The authorisation letter needs to be valid for the complete period of execution of the painting work. (iii) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (iv) Building wise stage passing register shall be maintained and submitted alongwith RAR/FB duly signed the Engr-in-Charge and Contractor (v) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. The specification and details of the equipments and tools pertaining to this item is denoted on particular specification. Manual method of paint applicaiton is not allowed and also penalty shall be levied if appropriate tools and equipments pertaining to smart periodicals not used. (vi) Proper masking arrangement shall be carried before the application of primer or paint. (vii) The other coat of primer and paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (viii) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.

Material and labour for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer over & incl a coat of average 1mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of ceilings and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparing old surfaces of wood and wood based material exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old surfaces of steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

Material and labour for preparation of old painted surfaces of wall/ concrete, kerb stone etc exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for painting floors with ready mixed paint, for use on floors each coat complete all as specified and as directed

Material and labour for complete removal of existing treatment on old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby / nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete.

Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified

M&L providing precast cement concrete solid building blocks PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 in walls complete all as specified

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throating complete all as specified and as directed

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified Make : Greenply/Century ply

Hacking out old broken glass any thickness, size, quality or description from wooden frames/ steel frame/ aluminium frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix Sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square not exc 0.5 Sqm in each panes complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane

Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongry complete all as specified and directed

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongrycomplete all as specified and directed

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 sqm each with shutters (without taking off shutters from the frame ) and removing to store all as specified and directed.

Taking down chowkats or frames (without taking down Shutters from frame) size not exc 1.5 sqm each all as specified and directed.

Material and labour for second class hard wood plain solid straight chowkats and framed wrought framed on the solid rounded or chamfered put together with glue and pinned at joints including preservative chemical treatment all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed

Material and labour for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site as per specification and as directed.

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as per specification and as directed.

S&F 100mm size stainless steel butt hinges medium weight complete all as specified

Supply and fix for 150 mm extruded aluminium alloy handles anodized complete all as specified and directed.

Supply and fix 150 mm aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate

Supply and fix floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, over all length 140 mm complete all as specified and directed.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

Supply and fix in repairs, for aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F in repair stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed

Material and labour for preparation of new undecorated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete as specified

M&L for anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc complete all as specified. Note : Supply only floor spring, glass, SS friction hinges, particle board, wire gauze will be measured seperately

M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified complete all as specified. Note : Supply only glass, particle board, wire gauze will be measured seperately

M&L for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/Imax hinges 01 No, hinges type B-21 100mm long 02 Nos suitable handle 01 No per shutter or as required etc complete all as specified Note : Supply only glass, particle board, wire gauze will be measured seperately

Supply and fix in repairs, anodised aluminium curtain rod decorative type powder coated 20 mm dia fixed including brackets complete all as specified and directed.

Supply and fix in repairs, aluminium (die cast) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed

Supply and fix for 110 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc., using synthetic rubber adhesive cement solvent complete all as specified and directed .

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix for 75 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge.

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

Supply and fix for 75mm dia PVC (SWR) bends with access door, any radius complete all as specified and directed.

S&F in repair 75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

S&F 20mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

S&F 25mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.

Supply and fix in repairs PVC valveless, syphonic action type flushing cistern of 10 litres capacity, white colour, with inlet, ball valve, float and handle including brackets all as specified and directed.

Supply and fix in repairs, waste pipe of polyethylene of low or high density or PVC 32 mm dia for WHB, sink, urinal complete all as specified and directed.

Supply and fix in repairs, white vitreous china wash down water closet pan, pedestal pattern, white with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to down pipe and flushing pipe all as specified and directed.

S&F in repair vitreous china wash down closet pan (Pedestal pattern white) standard size with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified Make : Jaquar (Cat Part No : LYS WHT 0314) or equivalent as approved.

S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified

S&F in repair Vitreous China Urinal, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F 15mm dia brass CP urinal spreader complete all as specified

Supply and fix for PVC connection 15 mm size with PTMT nut of length 450 mm long all as specified and directed.

Supply and fix in repairs, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated / PVC or aluminium hinging device all as specified and directed.

S&F in repairs vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified

S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified

S&F in repair bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat part No CON-107KN

Supply and fix in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified

Supply and fix in repairs, CP angle cock 15mm dia. fancy type cast copper alloy with crutch or butterfly handle, screwed down of Make-Jaquar Cat. No. CON-053KN or equivalent model in Parryware / Prayag / Gem.

S&F in repair 15mm concealed type angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified

Supply and fix in repairs CP WHB mixer cast copper alloy central hole for WHB and long shank fancy type 15 mm bore complete all as directed. Make - Jaquar Cat. No. CON-167KNB or equivalent model in Parryware / Prayag / Gem

Supply and fix in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed. (Make - Jaquar Cat. CON-281KN or equivalent model in Parryware/ Prayag / Gem

Supply and fix in repairs Toilet paper holder Make :Jaquar Code ACN-1153N or equivalent model in Parryware / Prayag / Gem

Supply and fix in repairs towel ring round Make Jaquar AQN -7721 or equivalent model in Parryware / Prayag / Gem

S&F in repair 20 mm dia brass stainless steel tubular towel rail D type 600mm long complete all as specified

Supply and fix in repairs CP Single Towel Rail 600 mm long between flanges Make : Jaquar AQN 7711 or equivalent model in Parryware / Prayag / Gem

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

Supply and fix in repairs shower rose brass chromium plated with or without swivel joints, 125 mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surfaces such as skirtings, wall, dados and risers to steps etc., size 350mm x 250mm x 7 mm / 450mm X 350mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering as backing coat in CM 1:3 all as specified and directed.

Material and labour Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour for non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., and including 15 mm thick layer of screed bed in cement mortar 1:4 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed

Material and labour for Vitrified ceramic coloured tiles (approved shade) of polish area of each tiles not exceeding 0.36 Sqm , minimum 8mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15 mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified and directed.

M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed

Demolition of stone slabs and tiles of any description laid bedded and pointed in mortar all as specified and directed.

Material and labour for 20 mm thick granite( of any type) (table rubbed and polished) in cooking platforms, steps, cills, pillars and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4, including rounding and polishing of edges complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, for roof coverings in small patches all as specified and directed.

S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.

S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutters, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.

Material and labour for aluminium wind tie of any size fixed with self tapping screws of size 50/ 75 mm with integral EPDM washer in roof covering.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed

M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed

S&F 8mm thick fibre cement plank ( 3.00 x .15m size) of any colour fixed in position with suitable screws/ fastners as per manufactrurers instructions on aluminium/ mild steel work in wall cladding as in repairs complete all as specified and directed. Make: Sheera of M/s Mahaphant Fibre Cement Pvt Ltd or its equivalent as approved by GE Note: Aluminium & Mild Stell work shall be measured and paid seperately

Dismantling ceiling boards / wall cladding (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.

M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 4mm thick non-asbestos fibre cement building design boards fixed or laid/ inserted to aluminium frame work with screws incl applying two coats of OBD over a coat of primer complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works like cooler stand conforming to Fe-290, Gde -E-165 complete all as specified and as directed.

S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the like complete all as specified and directed

M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Dismantling wood boarding, panels, beams or any description, fixed any position with nails

M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard, wall with finish to match all adjoining surfaces including sanding and applying mixture of filler and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed

M&L for 24mm thick superior quality, chemically pressure treated, egde glued, finger jointed/rubber wood boarding panels/beams tongued, grooved fixed over rubber wood frame work with rubber wood runner of size 50x30mm fixed at 600mm c/c using brass screws duly fixed with walls including provision of designed rubber wood beading to top termination of wood boarding and finished with two coats of melamine polish with asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc., including preparation and applying three types of sand papers and surface finish to a glossy/ mat finish to match with the adjoining surface complete all as specified and as directed. Make of Rubber Wood members : RUBCO/ India Wood or equivalant

M&L for 18mm thick HDF boarding (Fire and water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed

S&F stainless steel auto closing hinges of standard size for cupboards complete all as specified and directed

S&F stainless steel 150mm cupboard handles complete all as specified and directed

S&F stainless steel 100mm long tower bolts complete all as specified and directed

S&F Magnetic door catcher for cup board complete all as specified and directed

Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :- Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms

S&F for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified

M/s Ramesh Lal

SHUBHAM SHANKAR GAIKWAD

CHANDER SEKER ENTERPRISE

Sree Tirumala Enterprises

V KARTHICK

SKV Engineering

LOOK UP ENTERPRISES

CARTWHEEL CONSTRUCTION