A/R and M/O building in BM-PK division during 2025-26.

Running, operation, Maintenance and cleaning of Water body and fountains running in morning and evening shifts or as per the schedule prescribed by Engineer-in-charge by deploying pump operator in two shifts (One number in Each shift daily) for 1 nos. of fountains. The skilled electrician for checking/repairing of panels and motor pumps will visit minimum 2 times per month or more as required. Maintenance and operation includes , 6 nos. of fountain pumps, 1 panels including all accessories repair of all electrical and mechanical system of fountains (including lifting, lowering, repair/rewinding of motors to and fro from site to workshop and back after repair, mechanical faults of pump sets, electrical panels and fitting/fixtures/waterline etc.) Dewatering & cleaning of water bodies fountain pipes and nozzles with various accessories/parts, floating debris/leaves, algae, silt etc. and disposed off to designated place for dumping also deploying sufficient nos of beldar i.e. 2 nos. or more per month for cleaning of fountains and water bodies completed in 2 days for fountain and water body. and The fountain shall be run invariably and contractor has to arranged all necessary resources required(the fountains shall be taken over by the agency from department as is where is basis and no payment shall be made for any fault and the same shall be rectified/repaired by the contractor at their own cost) and also includes watch & ward of all the accessories i.e Nozzles, Motors ,valve, starter, panel,lights & cable etc. & complete fountain in all regards including security theft, running, maintenance repair etc. Complete. Conditions:- 1. Agency will be responsible for the security of the entire fountain systems at each location and any loss/ vandalism will be restored to the original shape by the agency. In case of non-compliance, the same will be recovered with panel rate or at the market rate or as decided by the engineer in charge. The decision of the Engineer in charge will be binding on the contractor. 2. The timing of the operation of the fountain may vary in each shift or season by season. 3. water & electricity will be supplied free of cost by the deptt. 4. In case of a minor fault of any nature same shall be rectified by agency within 6 hours thereafter recovery/penalty @ Rs. 1000/- per fountain system per day will be made from the bill. 5.In case of a major fault no payment shall be deducted for Non-operation of the fountain for the first days and thereafter recovery/penalty @ Rs. 2000/- per fountain per day will be made from the bill.

Repairing / overhauling 40 HP pump set & replacement of ball bearing 6307/c4/nos, ball bearing 6308 RS 1 No, neck ring 2 nos deflector 2 nos, pump shaft 1 no, mechanical pump seal (TC/TC) 2 nos, 'O' ring 3 nos, bearing housing repairing 2 nos, impellor key 2 nos, nut bolt stud, rubber packing cartage Site to workshop and back to site labour for dismantling and reinstallation of pump set after repairing and minor lath work to match the spare parts including testing commissioning etc as per the direction of engineer in charge.

Rewinding of 40 HP squirrel cage induction horizontal electrical motor of 1450 RPM suitable for operation on 415 Volts, 3 phase, 50 cycle "AC supply including providing copper wire of required size dismantling refixing the repair motor on the foudation block making proper alignment with pump, providing and replacing broken nuts and bolts including testing and commissioning etc as per the direction of engineer in charge.

Providing and fixing 3 pole power contractor ML -3 type L&T BCH make with 2 nos+2MC AWC contact on operation 3 phase 440 volts for DOL/ star delta fully automatic starter including cartage, fixing charges eletric connection etc as per the direction of engineer-in-charge.

Providing and replacing volt meter 96x96 mm 0-30 Amp of 0-500 volt of AE (Automatic Electric) seimens or equivalent including cartage, labour charges for dismantling and fixing the Ampere meter and electric connection testing etc as per the directionof engineer in charge.

Providing and replacing AMP meter 96x96 mm 0-30 Ampere of automatic eletric seimens/Havells or equivalent including cartage labour charges for dismantling and re-fixing the AMP meter and electric connection testing etc as per the direction of engineer in charge.

Providing and fixing FN 32 TPN & FN 100, TPN Amp MCB L&T /Fuji/ Havells make including cartage, labour charge for dismantling the old MCB & fixing the new MCB electirc connection testing etc. as per the direction of engineer in charge. A)32 Amp (FN/TPN) L&T make

Providing and fixing FN 32 TPN & FN 100, TPN Amp MCB L&T /Fuji/ Havells make including cartage, labour charge for dismantling the old MCB & fixing the new MCB electirc connection testing etc. as per the direction of engineer in charge.(B) 100 AMP (FN/TPN) L&T make

Providing and fixing electic timer type ET 100 L&T or equivalent make for star delta fully starter 3-10 secs to 9-30 sec range operating voltage 230/440 volt CAT No. SS91270 including cartage, labour charges for dismantling of old timer and fixing of new timer including electric connetion testing etc as per the direction of engineer in charge.

Providing and fixing AMP meter (0-10 Amp) 96x96 Square meter size Automatic Electric Seimens make with 60/5 Amp CTS including labour charges for fixing the AMP meter and electric connection testing etc. as per the direction of engineer in charge.

Providing and fixing overloaded relay with 9-14 Amp to 28-42 Amp automatic starter including labour charges for fixing the over load relay cartage etc. as per the direction of Engineer-in-charge.

providing and fixing SKF make ball bearing (6010-12) 1 no (6210/C4) 1 no in 40 HP motor including dismantling and reflixing the motor greasing testing etc as per the direction of engineer-in-charge.

Providing and fixing 25 AMP Contractor L&T / BCH make for DOL starter / star delta fully automatic stater including labour charges for fixing the contractor cartage etc. as per the direction of engineer-in-charge.

Repairing / overhauling of SP-3L monoblock pump set kiloskar make 1440 RPM & replacement & ball bearing 2 nos (6305,6205) part plate 1 no. gland bush 1 no. , gland plate 1 no, gland stud 2 nos, impellor key 1 no. impellor nut 1 no, impellor key way balancing gland dori with greasing, nut bolt stud, pump shaft welding turning glading cartage site to workshop & back at site including dismantling the pump set and reinstallation of pump set as per the direction of the engineer- in- charge.

Rewinding of AC 5 HP motor mono block pump set 3 phase 440 volt 2800/ 2900 RPM with superior copper wire appropriate size including testing etc as per the direction of engineer-in-charge.

Providing and fixing single face preventer of L&T / MINILAC make sutable up to 15 HP pump set incluidng fixing charges cartage etc. as per the direction of engineer-in - charge.